共查询到19条相似文献,搜索用时 203 毫秒
1.
2.
多体制雷达视频模拟器设计及实现 总被引:1,自引:0,他引:1
详述了多体制雷达模拟器的设计思想及其实现方法,该模拟器采用嵌入式计算机PC104和高速大规模可编程逻辑器件FPGA相合的方法,能够模拟多种雷达体制的目标回波信号和杂波信号,该模拟器和接收、天馈、信号处理、终端数据处理组成雷达仿真系统对干扰机侦察设备进行测试和评估,也可作为实验设备用于信号处理机的调试、测试和评估,在同一硬件平台上,通过软件加载来满足各种不同体制的雷达目标、杂波模拟。 相似文献
3.
射频注入式雷达信号环境模拟器 总被引:3,自引:0,他引:3
简要介绍了射频注入式雷达信号环境模拟器的系统组成和工作原理 ,并阐述了系统控制软件的结构及其功能。射频注入式雷达信号环境模拟器可用于电子战侦察设备的研制调试、性能测试和系统评估。 相似文献
4.
为了使训练更有针对性和计划性,训练模拟器的评估功能应做到评估内容覆盖全面、贴合训练大纲、综合考虑训练过程中的各种因素、评估方式多样灵活等。根据训练模拟器评估功能需求以及已有研制经验,分别讨论了理论考试、操作训练评分、复杂训练课题评分以及辅助评估四种评分方式的设计思路,并提出了一种训练评分的处理流程。数据采集、专家系统和综合模糊评价法技术的应用在训练模拟器评估系统设计中起到很关键的作用。除了对以上关键技术应用的研究,在该课题上的研究应该重点放在提高智能化和灵活性上,以适应未来的复杂大型模拟器或者多模拟器的联网训练。 相似文献
5.
6.
7.
面向全球导航卫星系统(Global Navigation Satellite System,GNSS)信号的外辐射源雷达,是一种利用环境中GNSS信号作为非合作照射源进行探测的雷达。为满足基于GNSS信号的外辐射源雷达系统仿真和信号处理算法设计评估的需要,通过对该雷达系统组成与工作原理的分析,完成了面向GNSS信号的外辐射源雷达软件化信号模拟器的设计与实现。给定仿真场景下软件化模拟器输出信号处理和分析的结果验证了该模拟器可根据输入参数与模型正确完成信号仿真。 相似文献
8.
NOC设计的目的就是从体系结构上解决片上通信的瓶颈问题和时钟问题,片上网络的每条传输路径都包含若干路由器,经过每个路由器都要消耗数个时钟周期,当网络拥塞时,包传输会产生更大的延时,因此采用合适的路由算法来达到延时、吞吐率等的平衡是关键。本文使用NIRGAM仿真器对XY和OE两种算法在4×4的MESH拓扑上进行算法研究,结果显示OE算法的吞吐率和包延时的比值是2.5358,比XY路由算法的比值2.1126大,因此OE路由算法更适用于Mesh拓扑。 相似文献
9.
系统芯片面临的重大挑战在于设计之初对软硬件进行划分,并对系统的性能评估。针对这一挑战,阐述在ARM指令集模拟器基础上扩展片上总线(AMBA)模型、SDRAM控制器模型和SDRAM模型。实验结果显示,对MPEG4解码算法进行软硬件划分,采用模型可以准确地评估MPEG 4解码系统的性能和功耗。 相似文献
10.
11.
Cristiano Araujo Millena Gomes Edna Barros Sandro Rigo Rodolfo Azevedo Guido Araujo 《Design Automation for Embedded Systems》2005,10(4):253-283
This paper[3.5pc] presents the Platform Designer (PD) framework, a set of SystemC based tools that provide support for modeling,
simulation and analysis of multiprocessor SoC platforms (MPSoC), at different abstraction levels. PD provides mechanisms for
interconnection specification, process synchronization and communication, thus allowing the modeling of a complete platform,
in a unified environment. To do that it uses an extension of the ArchC ADL and acsys, a tool that enables the automatic generation
of a SystemC simulator of the platform. The main advantages of this approach are twofold. First, designers have more flexibility
since they can integrate and configure different processors to the platform, using a single environment. Second, it enables
a faster design space exploration, given that it automatically generates SystemC simulators of whole platforms at distinct
abstraction levels. A number of platform variations can be tried out with minor design changes, thus reducing design time.
Experimental results show the suitability of the platform simulator for design space exploration. Real applications (with
medium complexity) run in the platform in few minutes. Combined with the facility to generate platforms with minor changes,
this feature allows an improvement of the design space exploration. 相似文献
12.
随着集成电路设计规模的不断扩大,SOC设计的时代已经到来。SystemC作为一种新兴的SOC设计语言,它本质上是在C++的基础上添加的硬件扩展库和仿真核,这使得SystemC可以建模不同抽象级别的包括软件和硬件的复杂电子系统。在C++环境中,它支持软件、硬件和接口描述。利用SystemC的这些特性实现了对UART的建模,并用波形图验证了仿真结果。 相似文献
13.
Wishbone总线交易级建模 总被引:1,自引:0,他引:1
交易级建模在系统功能建模和验证方面可以增快速度,也可以加速仿真的速度并允许在高层次抽象中研究和确认设计中可供选择的模块.针对Wishbone片上总线协议,依据SystemC中接口方法调用的基本原理和交易级建模的方法,完成了Wishbone总线中共享总线的交易级建模,结果表明SystemC适合在交易级建模系统的行为和通信,交易级建模在仿真速度方面具有优势. 相似文献
14.
提出了一种基于Simple Sealar和SystemC的异构异步多核仿真器,不同运行频率的内核之间采用共享存储区实现通信及数据共享。实验结果表明该仿真器能够在时钟周期级正确模拟异构多核处理器的运行情况,并准确评估异构多核处理器的性能。该仿真器在异构多核系统的软硬件协同设计方面将有较好的应用前景。 相似文献
15.
软件GNSS中频信号模拟器 总被引:1,自引:0,他引:1
由于具有结构灵活、开放性强以及成本低的优势,软件GNSS(Global Navigation Satellite System)信号模拟器可成为GNSS接收机设计验证的高效平台。面向GPS/Galileo组合系统,阐述了软件GNSS中频信号模拟器的架构与实现,主要功能模块包括卫星星座仿真、接收机轨迹生成、传播通道特性仿真(包括电离层模型、对流层模型、多径模型、干扰模型)、数字中频信号生成。最后,对这一信号模拟器所产生的GNSS信号(包括GPS L1 C/A,GalileoE1 CBOC)进行了验证。 相似文献
16.
17.
SystemC is committed to support the requirements for an integrated, HW/SW co-design flow, thus allowing the development of
complex, multiprocessing, Systems-on Chip (MpSoC). To make this possible, efficient modeling and simulation methodologies
for Real-Time, Embedded (RT/E) SW in SystemC have to be developed, so that the designer can verify and refine the application
SW together with the rest of the elements of the platform. Accurate modeling of the application SW requires an accurate model
of the RTOS. Nevertheless, low-level, dynamic timing characteristics of the RTOS such as time-slicing, priority-based preemptive
scheduling, interrupts and exceptions do not have a direct implementation in SystemC.
In this paper, techniques are proposed to accurately model the detailed RTOS functionality on top of the SystemC execution
kernel. The model allows timed-simulation and refinement of the RT/E SW code in SystemC. The simulation technology has been
applied to the development of a high-level, POSIX simulation library in SystemC. The library allows the designer a fast, sufficiently
accurate, timed simulation of the application SW running on top of POSIX. As most current RTOSs support this standard, the
library is portable to different development frameworks. The library provides the required infrastructure for a complete,
multiprocessing, HW/SW co-simulation environment at different abstraction levels using SystemC. 相似文献
18.
19.
使用SystemC设计片上自演化系统 总被引:1,自引:1,他引:0
提出片上自演化系统的概念和基于SystemC的片上自演化系统设计方法,给出片上自演化系统的总体结构,使用SystemC建模搭建自演化系统实验平台.以典型低通切比雪夫滤波器为例,验证了实验平台的有效性.使用SystemC设计自演化系统既可在较高的抽象水平搭建自演化系统模型,加速验证、性能分析和探索系统结构,又可方便地进行软硬件协同设计,并最终达到硬件实现. 相似文献