共查询到20条相似文献,搜索用时 62 毫秒
1.
2.
酸枣仁抗氧化成分提取及其活性 总被引:2,自引:0,他引:2
通过活性跟踪测试,结合正交实验与响应面设计Box-Benhnken实验,对不同提取方法、提取溶剂、提取次数等条件下的酸枣仁提取物进行了体外抗氧化活性测定,以提取率、总还原力、羟自由基清除率、DPPH清除率和总抗氧化能力评价了酸枣仁的抗氧化活性. 结果表明,提取物抗氧化活性最优的提取条件为:76.5℃下回流提取1次、提取时间4.5 h、提取溶剂60%乙醇含量为59.1%(j)、液固比为10 mL/g. 由提取物的紫外及红外图谱判断酸枣仁中抗氧化活性成分为黄酮类物质. 相似文献
3.
放线菌BOS-009的分离、拮抗活性及鉴定 总被引:3,自引:0,他引:3
对从长白山不同海拔环境中分离筛选出可以产生抗菌活性物质的BOS-009放线菌菌株进行了研究,测定了该菌的抗菌谱,发现该菌株对多种植物病原性真菌及细菌有拮抗作用.通过形态特征、培养特征观察,生理生化特性及抑菌谱等系列比较.发现该菌株与链霉菌属的除虫链霉菌(Streptomyces avermitilis)的特征基本相符;通过16s rDAN序列比对,发现该菌株16s rDAN与除虫链霉菌的16s rDAN同源性达99%.根据多项分类原则和系统进化树的构建分析,将该菌株暂归入除虫链霉菌类. 相似文献
4.
以褐煤、肥煤和无烟煤为研究对象,进行降解时间、粒径和煤阶为因素的降解正交试验及绿孢链霉菌降解固定粒径各煤阶煤的实验;通过COD测定、元素分析和接触角测试,分析比较降解前后溶液有机物含量、煤的组成及亲水性,进而分析绿孢链霉菌对各煤阶煤降解转化的影响因素。结果表明:影响绿孢链霉菌对煤降解效果的主要因素是煤阶;绿孢链霉菌最容易利用降解褐煤生成的有机小分子物质,其次是利用降解肥煤与无烟煤生成的有机小分子物质;各煤阶煤经绿孢链霉菌降解后C元素和N元素含量相对升高,O元素和S元素含量及n(H)∶n(C)和n(O)∶n(C)值均降低;煤样经绿孢链霉菌降解后,褐煤的固液接触角变大,疏水性增强,而肥煤与无烟煤的固液接触角变小,亲水性增强,与各煤阶煤样的固液接触角由大到小的三种溶液依次为蒸馏水、矿井水和KO溶液。 相似文献
5.
白粉病是一种重要的植物病害,对谷物、蔬菜、果树和园艺作物造成广泛的危害,因此需要研究开发对白粉病有效而无副作用的防治剂。采用涂刷接种法来筛选放线菌的培养液,在试管中(70×15毫米),用大麦苗(7天生长期)测定抗白粉病菌的活性。在放线菌亚纲轮生链霉菌属Streptoverticillium rimofaciens B-98891菌株的培养液中发现了活性物质。用高效液相色谱分离该活性物质,并测定其活体和离体的活性,被确定是一 相似文献
6.
研究了活性炭对链霉菌182-2发酵液中抗真菌活性物质的脱色作用,讨论了实验条件对活性炭脱色能力的影响.实验结果表明,在28℃下,炭-液质量比1.0:2.5、脱色4 h时,1.5mm圆柱状活性炭对182-2发酵液具有良好的脱色效果,脱色率为77%. 相似文献
7.
8.
已知某些属的微生物(如假单胞菌属、青霉属、芽孢杆菌属和链霉菌属)能产生许多很好的抗真菌、抗细菌或抗癌细胞等活性物质,这些抗菌物质被用来治疗人类的传染病或控制植物病原菌。 相似文献
9.
10.
从士样中分离筛选的链霉菌4903菌株的代谢产物同时具有抑菌、除草活性。链霉菌4903对荔枝炭疽病菌(Glomerella cingulata)和荔枝霜疫霉菌(Peronophythora litchii)的抑菌圈透明,抑菌圈直径达到和超过25mm。除草活性生测结果表明:在固体培养条件下,链霉菌4903菌株对小麦(Triticum aestivum)和油菜(Brassica campestris)有强烈的抑制作用,链霉菌4903菌株对小麦苗的抑制率为94%.对油菜根和苗的抑制率分别为97%和83%。 相似文献
11.
乙烯酮(双乙烯酮)是十分重要的化工中间体,其下游产品较多。江苏某化工厂开发生产乙烯酮(双乙烯酮)下游产品三十多个,年生产规模三万多吨,是国内以乙烯酮(双乙烯酮)为中间体生产精细化学品的综合骨干企业。针对乙烯酮(双乙烯酮)下游产品废水特点,该厂结合企业实际,开展了产品优化,结构调整,清洁生产,资源循环利用,节水降耗等工作,从源头削减了污染物的生产。同时投资二千多万元新建预处理装置三套,6000m3/d废水生化处理装置一套,使全厂乙烯酮(双乙烯酮)下游产品的废水得到了有效的治理。 相似文献
12.
13.
14.
15.
我厂3号回转窑(Φ4m×60m)生产线在1996年年底由SP窑(产量912t/d)改为NSP窑(产量1320t/d),预分解系统为四级旋风预热器带离线式分解炉 相似文献
16.
The objective of the study was to explore the effect of the degree of deacetylation (DD) of the chitosan used on the degradation rate and rate constant during ultrasonic degradation. Chitin was extracted from red shrimp process waste. Four different DD chitosans were prepared from chitin by alkali deacetylation. Those chitosans were degraded by ultrasonic radiation to different molecular weights. Changes of the molecular weight were determined by light scattering, and data of molecular weight changes were used to calculate the degradation rate and rate constant. The results were as follows: The molecular weight of chitosans decreased with an increasing ultrasonication time. The curves of the molecular weight versus the ultrasonication time were broken at 1‐h treatment. The degradation rate and rate constant of sonolysis decreased with an increasing ultrasonication time. This may be because the chances of being attacked by the cavitation energy increased with an increasing molecular weight species and may be because smaller molecular weight species have shorter relaxation times and, thus, can alleviate the sonication stress easier. However, the degradation rate and rate constant of sonolysis increased with an increasing DD of the chitosan used. This may be because the flexibilitier molecules of higher DD chitosans are more susceptible to the shear force of elongation flow generated by the cavitation field or due to the bond energy difference of acetamido and β‐1,4‐glucoside linkage or hydrogen bonds. Breakage of the β‐1,4‐glucoside linkage will result in lower molecular weight and an increasing reaction rate and rate constant. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3526–3531, 2003 相似文献
17.
18.
19.
Conclusions It is significant that the purification on a single passage of viscose through porous ceramic corresponds to the result of a two-stage filtration of it in industrial filter-presses with standard fillings.Kiev Combine. Kiev Technological Institute of Light Industry. Translated from Khimicheskie Volokna, No. 3, pp. 20–22, May–June, 1969. 相似文献
20.
利用组件技术开发化工原理实验课件,给出了系统层、组件库层和应用层的架构划分。重点讨论了组件库的设计,给出了流体阻力这一典型实验的实现描述。实践证实,基于组件技术可以提高仿真实验的开发效率。 相似文献