Physical properties of water‐blown rigid polyurethane foams from vegetable oil‐based polyols

Fifty vegetable oil‐based polyols were characterized in terms of their hydroxyl number and their potential of replacing up to 50% of the petroleum‐based polyol in waterborne rigid polyurethane foam applications was evaluated. Polyurethane foams were prepared by reacting isocyanates with polyols containing 50% of vegetable oil‐based polyols and 50% of petroleum‐based polyol and their thermal conductivity, density, and compressive strength were determined. The vegetable oil‐based polyols included epoxidized soybean oil reacted with acetol, commercial soybean oil polyols (soyoils), polyols derived from epoxidized soybean oil and diglycerides, etc. Most of the foams made with polyols containing 50% of vegetable oil‐based polyols were inferior to foams made from 100% petroleum‐based polyol. However, foams made with polyols containing 50% hydroxy soybean oil, epoxidized soybean oil reacted with acetol, and oxidized epoxidized diglyceride of soybean oil not only had superior thermal conductivity, but also better density and compressive strength properties than had foams made from 100% petroleum polyol. Although the epoxidized soybean oil did not have any hydroxyl functional group to react with isocyanate, when used in 50 : 50 blend with the petroleum‐based polyol the resulting polyurethane foams had density versus compressive properties similar to polyurethane foams made from 100% petroleum‐based polyol. The density and compressive strength of foams were affected by the hydroxyl number of polyols, but the thermal conductivity of foams was not. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Role of additives in fabrication of soy-based rigid polyurethane foam for structural and thermal insulation applications

Environmental concerns continue to pose the challenge to replace petroleum-based products with renewable ones completely or at least partially while maintaining comparable properties. Herein, rigid polyurethane (PU) foams were prepared using soy-based polyol for structural and thermal insulation applications. Cell size, density, thermal resistivity, and compression force deflection (CFD) values were evaluated and compared with that of petroleum-based PU foam Baydur 683. The roles of different additives, that is, catalyst, blowing agent, surfactants, and different functionalities of polyol on the properties of fabricated foam were also investigated. For this study, dibutyltin dilaurate was employed as catalyst and water as environment friendly blowing agent. Their competitive effect on density and cell size of the PU foams were evaluated. Five different silicone-based surfactants were employed to study the effect of surface tension on cell size of foam. It was also found that 5 g of surfactant per 100 g of polyol produced a foam with minimum surface tension and highest thermal resistivity (R value: 26.11 m²·K/W). However, CFD values were compromised for higher surfactant loading. Additionally, blending of 5 g of higher functionality soy-based polyol improved the CFD values to 328.19 kPa, which was comparable to that of petroleum-based foam Baydur 683.     

Polyurethane foams made from liquefied bark‐based polyols

Liquefaction is known to be an effective method for converting biomass into a polyol. However, the relationships between bark liquefaction conditions and properties of the resulting foams are unclear. In this study, polyurethane foams (PUF) were made using bark‐based polyols obtained through liquefaction reactions of bark at two different temperatures (90 and 130°C). Through systematic characterization of the PUFs the influence of the liquefied bark and liquefaction conditions on foam properties could be observed. The bark‐based foams had similar foaming kinetics, thermal stability, and glass transition temperatures compared with the PEG‐based control foam. The bark‐based PUF from the polyol obtained at the higher liquefaction temperature showed comparable specific compressive strength to the PEG‐based control foam. Lastly, both bark foams exhibited a high amount of open‐cell content, with the foam made from the lower temperature liquefied polyol having poor cell morphology. This deviation from the controls in the open‐cell content may explain the lower modulus values observed in the bark PUFs due to the lack of cell membrane elastic stretching as a strengthening mechanism. These results demonstrated the influence of the bark liquefaction conditions on foam properties, thereby providing a better fundamental understanding for the practical application of bark‐based PUFs. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40599.     

Flexible,hard, and tough biobased polyurethane thermosets from renewable materials: glycerol and 10-undecenoic acid

The main theme of this work is to develop 100% biobased low viscous polyols from renewable resources. An epoxide compound (UA-GLY-E) was synthesized through esterification of glycerol and 10-undecenoic acid preceded by peroxidation. For the first time, UA-GLY-E was utilized as a building block in the generation of low viscous polyols and polyurethanes therefrom. The biobased polyols were synthesized by epoxide ring opening of UA-GLY-E with different nucleophiles, namely glycerol, water, and methanol. The advantage of these biobased polyols is their low viscosity and at the same time high functionality. These biobased polyols were further converted into poly(urethane–urea) coatings by reacting with methylene diphenyl diisocyanate. The impact of peripheral structural change in the polyols on the properties of polyols and their polyurethane coatings was studied. Flexible, hard, and tough thermosets have been prepared successfully from the same epoxy compound by altering the peripheral moiety in the polyol structure. Biobased polyurethanes prepared from glycerol and water-based polyols have shown better crosslinking density over the methanol-based polyol. Moreover, these biobased polyurethane films have shown good thermal stability, mechanical strength, and chemical resistance as well.     

Preparation and Characterization of Sustainable Polyurethane Foams from Soybean Oils

Polyol derived from soybean oil was made from crude soybean oil by epoxidization and hydroxylation. Soy-based polyurethane (PU) foams were prepared by the in-situ reaction of methylene diphenyl diisocyanate (MDI) polyurea prepolymer and soy-based polyol. A free-rise method was developed to prepare the sustainable PU foams for use in automotive and bedding cushions. In this study, three petroleum-based PU foams were compared with two soy-based PU foams in terms of their foam characterizations and properties. Soy-based PU foams were made with soy-based polyols with different hydroxyl values. Soy-based PU foams had higher T _g (glass transition temperature) and worse cryogenic properties than petroleum-based PU foams. Bio-foams had lower thermal degradation temperatures in the urethane degradation due to natural molecular chains with lower thermal stability than petroleum skeletons. However, these foams had good thermal degradation at a high temperature stage because of MDI polyurea prepolymer, which had superior thermal stability than toluene diisocyanate adducts in petroleum-based PU foams. In addition, soy-based polyol, with high hydroxyl value, contributed PU foam with superior tensile and higher elongation, but lower compressive strength and modulus. Nonetheless, bio-foam made with high hydroxyl valued soy-based polyol had smaller and better distributed cell size than that using low hydroxyl soy-based polyol. Soy-based polyol with high hydroxyl value also contributed the bio-foam with thinner cell walls compared to that with low hydroxyl value, whereas, petroleum-based PU foams had no variations in cell thickness and cell distributions.     

Recent Advancement in Plant Oil Derived Polyol‐Based Polyurethane Foam for Future Perspective: A Review

Polyurethane foams (PUFs) are widely used materials because of their wide range of applications, particularly, thermal and sound insulation, mattresses, furniture, construction, cushioning, packaging, transportation of goods, etc. Recently, commercial PUF products fabricated from plant oil (PO)‐based polyols have gained increasing popularity, because of their low cost and eco‐friendly nature in comparison to petroleum‐based PUF. To date, insufficient reviews have been reported in the area of modification of plant oils for synthesizing polyol for foam synthesis. Due to abundant availability, low‐cost, and renewable nature of plant oils, they are being used as precursors for modern polyurethane industry use. There is a need for versatile and economical methods for conversion of plant oils such as castor oil (CO) and soybean oil (SO) into useful polyols for industry use. This review is an overview of the most recent advanced methods for the conversion of plant oils into polyol and further utilization of it for commercial PUF products. Since the last decade, many researchers have shown that plant‐polyol‐derived PUF can compete with conventional PUF. Practical Applications: Practical applications of the PO‐based polyurethane foams include thermal insulation, sound insulation, packaging, and waste water treatment.     

Bio-based flexible polyurethane foam synthesized from palm oil and natural rubber

As environment friendly polymers are required to reduce the green-house gas emissions and global warming, bio-based polyurethane foam (PUF) is attracting interest from the industrial sector and researchers. Bio-based polyols for PUF have been synthesized from various renewable resources, mostly plant oils. The present study explored a novel bio-based PUF produced from a mixture of bio-based polyols synthesized from palm oil and natural rubber. Palm oil-based polyol (POP) was synthesized via an epoxidation reaction of double bonds of palm oil followed by complete oxirane ring-opening. Hydroxy telechelic natural rubber (HTNR) was synthesized by oxidative degradation using periodic acid and sodium borohydride. For comparison, two diisocyanates were used: toluene-2,4-diisocyanate and polymeric methylene diphenyl diisocyanate. POP and HTNR were miscible and all PUFs showed polyhedral semi-closed cells and hardness was in the flexible foam range. One possible application of the novel PUF could be thermal insulation.     

Rigid polyurethane foams made from high viscosity soy‐polyols

This study investigated the physical properties of water‐blown rigid polyurethane (PU) foams made from VORANOL®490 (petroleum‐based polyether polyol) mixed with 0–50% high viscosity (13,000–31,000 cP at 22°C) soy‐polyols. The density of these foams decreased as the soy‐polyol percentage increased. The compressive strength decreased, decreased and then increased, or remained unchanged and then increased with increasing soy‐polyol percentage depending on the viscosity of the soy‐polyol. Foams made from high viscosity (21,000–31,000 cP) soy‐polyols exhibited similar or superior density‐compressive strength properties to the control foam made from 100% VORNAOL® 490. The thermal conductivity of foams containing soy‐polyols was slightly higher than the control foam. The maximal foaming temperatures of foams slightly decreased with increasing soy‐polyol percentage. Micrographs of foams showed that they had many cells in the shape of sphere or polyhedra. With increasing soy‐polyol percentage, the cell size decreased, and the cell number increased. Based on the analysis of isocyanate content and compressive strength of foams, it was concluded that rigid PU foams could be made by replacing 50% petroleum‐based polyol with a high viscosity soy‐polyol resulting in a 30% reduction in the isocyanate content. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Flexible polyurethane foams synthesized employing recovered polyols from glycolysis: Physical and structural properties

Polyurethane (PU) is one of the most important polymers with a global production of 17.565 million tons, which makes its recycling an urgent task. Besides, the main goal of PU recycling is to recover constituent polyol as a valuable raw material that allows to obtain new PU with suitable properties. Split‐phase glycolysis can be considered the most interesting PU recycling process since provides high‐quality recovered products in terms of polyol purity. The aim of this work was to evaluate several recovered polyols as replacement of the raw flexible polyether polyol in the synthesis of new flexible PU foams. These recovered polyols come from the split‐phase glycolysis of different types of PU foams and employing as cleavage agents diethylene glycol or crude glycerol (biodiesel byproduct). The influence of the foam waste type and of the cleavage agent on the foams properties was analyzed. The recovered polyols were evaluated by performing several foaming tests according to the method of free expansion foaming of conventional flexible foam. Synthesized flexible foams containing different proportions of recovered polyols were characterized by means of scanning electron microscopy, density and tensile properties; obtaining similar and sometimes even better values compared to the foams manufactured from commercial polyols. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45087.     

蓖麻油聚醚多元醇在聚氨酯软泡中的应用

利用双金属催化剂(DMC)制备了相对分子质量在2000～5600之间的聚氨酯(PU)软泡用蓖麻油聚醚多元醇,并通过发泡实验与常用软泡聚醚多元醇H-330进行了性能比较。结果表明,相对分子质量2000的蓖麻油聚醚多元醇制备的泡沫拉伸强度、伸长率和压陷硬度等均优于H-330聚醚,表明蓖麻油聚醚多元醇完全可以取代普通聚醚多元醇用于普通软泡生产。     

原材料对聚氨酯硬泡抗压性能的影响

以环氧丙烷聚醚多元醇、苯酐聚酯多元醇、多苯基甲烷多异氰酸酯PM-200、发泡剂一氟二氯乙烷(HCFC-141b)、泡沫稳定剂硅油AK-8801等为主要原料,采用一步法合成了聚氨酯硬泡,考察了不同种类多元醇及其配比、发泡剂、泡沫稳定剂种类及用量等对聚氨酯硬泡抗压性能的影响。结果表明:高羟值、高官能度的环氧丙烷聚醚多元醇可提高泡沫的压缩强度,且当环氧丙烷聚醚多元醇4110为100份,并加入20份左右苯酐聚酯多元醇580及10份左右聚醚403,泡沫稳定剂用量1～2份,发泡剂水用量0.5～1份,HCFC-141b用量30～35份,催化剂用量0.5～1.5份时,所得聚氨酯硬泡性能较好。     

植物油多元醇改性硬质聚氨酯泡沫性能的研究

采用植物油多元醇、聚醚多元醇、异氰酸酯和发泡剂HCFC-141b等为主要原料,制备得到植物油聚氨酯泡沫塑料,探讨了植物油多元醇加入量对泡沫塑料压缩强度、屈服强度、弹性模量和动态粘弹性能影响.结果表明,随着植物油多元醇加入量增加,泡沫塑料的压缩强度和弯曲模量逐渐减小,弹性模量呈先缓慢上升后下降趋势.作为硬泡应用时,植物油多元醇添加量应小于20份,可提高阻尼性能.     

Noncatalytic polymerization of ethylene glycol and epoxy molecules for rigid polyurethane foam applications

The study investigated an approach to incorporate modified epoxidized soy‐based vegetable oil polyol as a replacement for petroleum‐based polyether polyol and to substantially reduce the isocyanate loading in the rigid foam formulation. Noncatalytic polymerization of epoxidized bodied soybean oil and ethylene glycol (EG) was carried out in a closed batch reaction. Cleavage of the oxirane rings and hydroxyl group attachment at optimum conditions provided the desired polyol products. The polyols were characterized based on its hydroxyl numbers, acidity, viscosity, iodine number, and Gardner color index for quality purposes. Reactions of oxirane ring and EG were verified by spectroscopic FTIR. Crosslinking performance was evaluated by extractability analysis on the polyurethane (PU) elastomer wafers. Rigid foaming performed at 50 and 75% petroleum‐based polyether polyol replacements have shown excellent thermoinsulating and mechanical properties compared with epoxidized soybean oil (ESBO) alone or petroleum‐based polyether polyol alone. A reduction of up to 8% of the polymeric diphenylmethane diisocyanate was achieved using the synthesized ESBO‐EG‐based polyols. A higher average functionality polyol is key component to the reduction of isocyanate in PU synthesis. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Highly functional biobased polyols and their use in melamine–formaldehyde coatings

Highly functional sucrose soyate polyol (SSP) resins were synthesized by ring-opening epoxidized sucrose soyate with methanol or ethanol and were subsequently crosslinked with a melamine–formaldehyde (MF) resin in the presence of an acid catalyst or blocked acid catalyst. The biobased polyols were characterized by Fourier transform infrared spectroscopy, gel permeation chromatography, proton nuclear magnetic resonance spectroscopy, Brookfield viscosity, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The thermal properties of the biobased MF coatings were studied using differential scanning calorimetry and dynamic mechanical analysis. As controls, a soybean oil polyol (SBOP) with lower functionality and a commercial polyester polyol were studied for comparison. Overall, MF coatings formulated with SSPs showed superior properties to coatings formulated with SBOP and comparable properties to the commercial polyester which was attributed to the high hydroxyl functionality.     

Use of a Mixture of Polyols Based on Metasilicic Acid and Recycled PLA for Synthesis of Rigid Polyurethane Foams Susceptible to Biodegradation

Two polyol raw materials were obtained in the conducted research, one based on metasilicic acid (MSA), the other based on poly(lactic acid) (PLA) waste. The obtained polyols were characterized in terms of their applicability for the production of rigid polyurethane foams (RPUFs). Their basic analytical properties (hydroxyl number, acid number, elemental analysis) and physicochemical properties (density, viscosity) were determined. The assumed chemical structure of the obtained new compounds was confirmed by performing FTIR and ¹H NMR spectroscopic tests. Formulations for the synthesis of RPUFs were developed on the basis of the obtained research results. A mixture of polyols based on MSA and PLA in a weight ratio of 1:1 was used as the polyol component in the polyurethane formulation. The reference foam in these tests was a foam that was synthesized only on the basis of MSA-polyol. The obtained RPUFs were tested for basic functional properties (apparent density, compressive strength, water absorption, thermal conductivity coefficient etc.). Susceptibility to biodegradation in soil environment was also tested. It was found that the use of mixture of polyols based on MSA and PLA positively affected the properties of the obtained foam. The polyurethane foam based on this polyol mixture showed good thermal resistance and significantly reduced flammability in comparison with the foam based MSA-polyol. Moreover, it showed higher compressive strength, lower thermal conductivity and biodegradability in soil. The results of the conducted tests confirmed that the new foam was characterized by very good performance properties. In addition, this research provides information on new waste management opportunities and fits into the doctrine of sustainable resource management offered by the circular economy.     

Effect of the addition of wood flours on the properties of rigid polyurethane foam

The objective of this study is to investigate an appropriate process to fabricate the wood‐polyurethane hybrid composites [wood‐polyurethane foam (PUF)]. Rigid PUFs that contain up to 20% wood flours were successfully fabricated from polymeric 4,4‐diphenylmethane diisocyanate, polyols, silicone surfactant, dibutin dilaurate/dimethylethanolamine catalysts, and distilled water (chemical blowing agent). The effects of hydroxyl value of polyols, wood flour particle size, wood flour content, isocyanate index, and water amount on the compressive property of foam were investigated. The morphology of the cell was observed with a scanning electron microscope. Wood‐PUF with different densities were prepared at different water contents in the wood flours. The relationship between the compressive property and density was established following the Power law. The incorporation of wood flour improved the compressive property of PUF, whereas its tensile and flexural properties were reduced. The thermal stability of the PUF was improved with the addition of wood flour. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Bio-based rigid polyurethane foam composites reinforced with flame retardants: From synthesis to performance evaluation

The building and construction industry is under increasing pressure to make insulation materials greener, more sustainable, and less flammable. In this study, sugar beet pulp was liquified under the optimized liquefaction conditions and used as the source of bio-polyol (SBpol) in the production of bio-based rigid polyurethane foam (sPUF). In order to improve the flame retardancy, sPUF composites were prepared with the addition of flame retardants; expandable graphite (EG) and/or dimethyl methyl phosphonate (DMMP). The bio-polyol was used at a fixed ratio of 50 php in sPUF composites whereas the total ratio of flame retardants was fixed at 20 php. The effects of the ratio of EG and/or DMMP on the morphological, physicomechanical, thermal, and flame retardant properties of sPUF composites were evaluated. Although the thermal conductivity values of flame retardant added sPUF composites were increased in comparison to the petroleum-based foam, the compressive strength values were decreased as the amount of DMMP increased in the flame retardant formulation. Thermogravimetric analysis showed that the onset of decomposition of 20 php DMMP-containing sPUF composite decreased to 168.3°C. Although the limiting oxygen index (LOI) value of the petroleum-based PUF was as low as 19.7%, the LOI value of the sPUF/10E/10D foam increased to 24.9% (by about 26%). According to the cone calorimeter results, the peak heat release rate (pHRR) of sPUF was much higher than the petroleum-based foam. The incorporation of both DMMP and EG could further improve the flame retardant properties. The pHRR value of sPUF/10E/10D was 28.1% lower than that of sPUF. The results have shown that flame retardancy of sPUF composites could be improved by the addition of EG which acts in the condensed phase and DMMP, which acts mainly in the gas phase during burning. Flame retardant incorporated sPUF composites are considered as promising materials for use in insulation applications.     

小桐子油脂肪酸聚酯多元醇及聚氨酯泡沫的制备和性能

研究了脂肪酸环氧-开环-酯化三步反应制备聚酯多元醇,比较了3种不同碘值的脂肪酸原料制备的聚酯多元醇及其聚氨酯泡沫（PUF）性能。脂肪酸碘值越高多元醇的羟值也越高：1#、2#和3#聚酯多元醇羟值分别为：261.47 mgKOH/g、370.28 mgKOH/g和434.49 mgKOH/g。3种多元醇的相对分子量为600～2000。3种泡沫的压缩和弯曲性能与泡沫密度成正比。泡沫SEM分析显示：羟值较高的多元醇泡沫2#和3#泡沫孔结构较规则,以正五边形和正六边形居多;1#泡沫泡孔不规则,易变形。对3种泡沫的TG-DSC、DTG分析结果表明：3种泡沫的热分解温度都约为300 ℃,具有较好热稳定性。     

Starch,Sucrose, and Rezol® IL800 as Density Modifiers for Polyurethane Rigid Foams Formulated by Recycled Polyol

Waste polyurethane rigid foam (PUF) is recycled by the glycolysis process. The recycled product is used in a polyol blend, applied in a new foam formulation. Polyurethane rigid foams formulated by recycled polyols are highly dense compared to rigid foams formulated by virgin polyols. As these foams are mostly used in insulation, they make an extra mass to the main product or system that is insulated. Therefore, it is important to decrease their density as much as possible.

Some density modifiers such as starch, sucrose, and REZOL^® IL800 were investigated to recognize their effect on PUF's density.     

Sustainable rigid polyurethane foams based on recycled polyols from chemical recycling of waste polyurethane foams

The preparation and characteristics of rigid polyurethane foams (RPUFs) based on recycled polyol obtained by glycolysis of waste RPUF scraps from end-of-life refrigerators were investigated. To deactivate the amine adducts derived from isocyanates, the recycled product obtained after depolymerization was chemically modified via addition polymerization of propylene oxide. Two kinds of recycled polyols with different hydroxyl values and viscosity were blended with conventional virgin polyether polyol to prepare the RPUFs. The effects of the recycled polyols on the physical properties of RPUFs such as cell structures, compressive strength, thermal conductivity, and limiting oxygen index were discussed. It was found that the RPUFs from recycled polyols showed superior compressive strength, thermal insulation property, and self-extinguishing property compared with conventional control foam. The results of this study reveal that the recycled polyols could be used as feedstock for RPUFs with superior performance. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47916.