Isobaric vapor–liquid equilibrium for ternary system of ethanol,ethyl propionate and para-xylene at 101.3 kPa

Isobaric vapor–liquid equilibrium(VLE) data for the binary system ethyl propionate(2) + para-xylene(3) and ternary system ethanol(1) + ethyl propionate(2) + para-xylene(2) at atmospheric pressure(101.3 k Pa)were obtained by a VLE modified othmer still. All the experimental data passed a point to point consistency test of Van Ness method, which verified the data reliability. The Wilson and UNIQUAC activity coefficient models were employed to correlate the binary VLE data to obtain binary interaction parameters. Based on binary interaction parameters, ternary VLE data of ethanol(1) + ethyl propionate(2) + para-xylene(3) were predicted by Wilson and UNIQUAC models, which proved that predicted values are consistent with the experimental data.Furthermore, azeotropic phenomenon between ethanol and ethyl propionate disappears when the mole ratio of para-xylene and binary system of ethanol and ethyl propionate is 1:1. Therefore, this paper convinced that para-xylene is a proper extractive additive that could be used in extractive distillation to separate the binary azeotropic system of ethanol and ethyl propionate.     

1,2-环氧环己烷与2-环己烯-1-酮的等压汽液平衡

Green oxidation of cyclohexene using dioxygen as oxidizing agent is highly desirable because of its environmental compatibility and economic impact. Separation of its oxidation products depends on the reliable vapor- liquid equilibrium (VLE) data of relevant components, which are still lacking. The VLE data of binary system 1,2-epoxycyclohexane and 2-cyclohexen-1-one under ambient pressure were obtained using an improved VLE equipment EC-2 still in this work. The results showed that this binary system has no azeotropic point. Furthermore, the experimental VLE data were correlated with the Wilson thermodynamic model and the corresponding binary interaction parameters of the model were obtained. The results showed that the VLE data agreed well with the model and passed the thermodynamic consistency test of Herrington.     

Experimental measurement and thermodynamic modeling of binary and ternary solid-liquid phase equilibrium for the systems formed by L-arabinose,D-xylose and water

Solid-liquid phase equilibrium data for binary (L-arabinose-water) and (D-xylose-water) systems at temperatures from (269.85-298.05) K and ternary (L-arabinose-D-xylose-water) system at temperatures of 273.85 K,278.85 K and 284.45 K were measured at atmospheric pressure.The ternary phase diagrams of the systems were constructed on the base of the measured solubility.Two pure solid phases were formed at given temperatures,including pure L-arabinose and pure D-xylose,which were confirmed and determined by the method of Schreinemakers' wet residue.At the same temperature,the crystallization region of L-arabinose was larger than D-xylose's.The acquired solubility data were then correlated using the NRTL model,Wilson model and Xu model.The calculated solubility with the three models agreed well with the experimental values.     

DME-CO2-CH3OH和DME-CO2-C2H5OH体系的高压汽液相平衡研究

In this study, the Gibbs-Duhem equation was applied to make the thermodynamic consistency test and thermodynamic model estimation for systems of CO2-DME （dimethyl ether）, DME-CH3OH, CO2-CH3OH and DME-C2H5OH systems on the basis of the vapor-liquid equilibrium （VLE） experimental data in published reports. And the NRTL binary interaction parameters of the systems mentioned above were regressed by the VLE data and were subjected to a thermodynamic consistency test because the study showed that PR-NRTL model combination was appropriate for the four systems mentioned above. The regressed binary interaction parameters were used to estimate the VLE for DME-CO2-CH3OH at temperatures of 313.15K and 333.15K, and the estimated result was coincident with the experimental data. On the basis of the predicted VLE data for systems of DME-CO2-CH3OH and DME-CO2-C2H5OH, the VLE behaviors of the two systems were studied by the phase diagrams of these two ternary systems, with the forms of both the two dimensional and three dimensional phase diagrams, respectively.     

Isobaric vapor–liquid equilibrium for binary system of aniline+methyl-N-phenyl carbamate

In this study,the quasi-static ebulliometric method was used to measure both of the vapor pressures of methyl N-phenyl carbamate(MPC),and the isobaric vapor–liquid equilibrium(VLE) data of the aniline and MPC binary system.The measured vapor pressure data of MPC,at different temperature ranging from 369.60 to 389.54 K,fitted well with the Antoine equation.The VLE data for the aniline and MPC system at(2.00,4.00,6.00,7.00 and 8.00) k Pa were correlated by both of nonrandom two-liquid(NRTL) and Wilson models.The parameters of the two models were obtained by regressing the experimental data,with the absolute temperature deviations of 0.54 K and 0.53 K,respectively.The relative volatility of the binary system calculated was all far more than 1,which gives the conclusion that the high purity MPC can be separated from aniline and MPC binary system by rectification or distillation technology.     

Solid-Liquid Equilibria of Several Binary and Ternary Systems Containing Maleic Anhydride

Solid-liquid equilibria (SLE) of three binary systems and seven ternary systems containing maleic an-hydride(MA) are measured by visual method. The experimental data are compared with the calculated ones with modified universal quasichemical functional group activity coefficient(UNIFAC) method in which the interaction parameters between groups come from two sources, dortmund data bank(DDB), if there's any, and correlations based on our former presented experimental SLE data of twenty binary systems. New groups of MA, ACCOO group, COO group, >C=O group and cy-CH2 group are defined and the SLE data of rnaleic anhydride in isopropyl acetate in literature are cited in order to assess the new interaction parameters, correlated with Wilson equation and the λh equation. The modified UNIFAC method with these new regressed interaction parameters is also used to predict other three binary systems containing rnaleic anhydride.     

顺丁烯二酸酐在单一溶剂和混合溶剂中的固液平衡研究

Solid-liquid equilibria (SLE) of three binary systems and seven ternary systems containing maleic anhydride(MA) are measured by visual method. The experimental data are compared with the calculated ones with modified universal quasichemical functional group activity coefficient(UNIFAC) method in which the interaction parameters between groups come from two sources, dortmund data bank(DDB), if there’s any, and correlations based on our former presented experimental SLE data of twenty binary systems. New groups of MA, ACCOO group, COO group, ＞C=O group and cy-CH2 group are defined and the SLE data of maleic anhydride in isopropyl acetate in literature are cited in order to assess the new interaction parameters, correlated with Wilson equation and the λh equation. The modified UNIFAC method with these new regressed interaction parameters is also used to predict other three binary systems containing maleic anhydride.     

Effect of methylimidazolium-based ionic liquids on vapor–liquid equilibrium behavior of tert-butyl alcohol + water azeotropic mixture at 101.3 kPa

Three ionic liquids(ILs),1-ethyl-3-methylimidazolium bromine([EMIM]Br),1-butyl-3-methylimidazolium bromine([BMIM]Br),and 1-hexyl-3-methylimidazolium bromine([HMIM]Br),were used as the solvent for separation of {tert-butyl alcohol(TBA)+ water} azeotrope.Vapor–liquid equilibrium(VLE)data for {TBA + water + IL}ternary systems were measured at 101.3 k Pa.The results indicate that all the three ILs produce an obvious effect on the VLE behavior of {TBA + water} system and eliminate the azeotropy in the whole concentration range.[EMIM]Br is the best solvent for the separation of {TBA + water} system by extractive distillation among the three ILs.The experimental VLE data for the ternary systems are correlated with the NRTL model equation with good correlations.Explanations are given with activity coefficients of water and TBA,and the experimental VLE-temperature data for {TBA or water + IL} binary systems.     

水-乙醇-1-丁基-3-甲基咪唑乙酸盐三元体系汽液平衡测定及模型

Vapor-liquid equilibrium (VLE) data were measured for ternary system water + ethanol + 1-butyl-3- methylimidazolium acetate ([bmim][OAc]), in a relatively wide range of ionic liquid (IL) mass fractions up to 0.8. Six sets of complete T-x-y data were obtained, in which the mole fraction of ethanol on IL-free basis was fixed separately at 0.1, 0.2, 0.4, 0.6, 0.8, and approximate 0.98. The non-random-two-liquid (NRTL) and electrolyte non-random-two-liquid (eNRTL) equations were used for correlation, showing similar deviations. The ternary VLE was also modeled with the correlation from two data sets, with the mole fractions of ethanol on IL-free basis being 0.1 and approximate 0.98. The VLE data were also reproduced satisfactorily. With the eNRTL model, the root-mean-square deviation for temperature is 0.79 K and that for vapor-phase mole fraction is 0.0094. The calculations are in good agreement with experimental data. The effect of the IL on the VLE behavior of the volatile components is also illustrated.     

基于UNIFAC模型的基团-OCOO-与-CH3,ACH,CH3OH和CH3COO-的交互作用参数估算与验证

Isobaric vapor-liquid equilibria (VLE) are experimentally measured for the binary systems of dimethyl carbonate (DMC) ethylene carbonate and methanol ethylene carbonate at 101.325kPa. The thermodynamic consistency of these experimental data is tested with an available statistic method. Interaction parameters of the carbonate group —OCOO— with the group —CH3, ACH, CH3OH and CHACO0— in UNIFAC model are determined using the experimental and literature VLE data. The results show that the calculated VLE data using the new UNIFAG parameters agree excellently with the experimental data in this work and in literature. These results are useful in the research on DMG and diphenyl carbonate synthesis by transesterification in design of reactor and distillation tower.     

α-蒎烯+β-蒎烯+对伞花烃常压汽液平衡测定与关联

采用改进的Ellis平衡釜测定了在常压(100.7 kPa)下三个二元物系α-蒎烯＋β-蒎烯(428.82 K ~ 438.13 K)，α-蒎烯＋对伞花烃(429.05 K ~ 447.15 K)，β-蒎烯＋对伞花烃(439.20 K ~ 448.66 K)和一个三元物系α-蒎烯＋β-蒎烯＋对伞花烃(432.17 K ~ 448.11 K)的汽液相平衡数据,并利用Herington规则，以积分检验法对实验数据进行了热力学一致性检验。选用Wilson、NRTL、UNIQUAC和UNIFAC活度系数方程进行关联和估算，用最小二乘法求出二元物系的最佳配偶液相活度系数模型的能量参数，并比较了汽相组成的计算值与实验值，其平均相对偏差均小于0.40 %。将得到的最佳Wilson二元模型参数直接用于该体系三元体系汽液相平衡数据的预测，计算的平衡温度与实验测得的平衡温度平均偏差为0.16 K。     

甲基二氯硅烷+甲基三氯硅烷+二甲基二氯硅烷+苯多元系常压汽液平衡研究

卤代硅烷的相平衡数据为硅烷生产所需,而这方面的研究又较缺乏,尤其是甲基乙烯基二氯硅烷生产中所需的汽液相平衡数据尚未见报道.今用新型泵式沸点仪测定了常压(101.325 kPa)下甲基二氯硅烷 甲基三氯硅烷 二甲基二氯硅烷 苯四元系及其四个三元体系和六个二元体系在不同液相组成时的泡点.由所测的二元系数据,用过量自由焓Q函数间接法推算了与之平衡的汽相组成.再用最小二乘法求出二元体系的最佳配偶液相活度系数模型参数.所得的六组最佳二元系Wilson模型参数符合热力学一致性,并用于该体系三元和四元系汽液相平衡数据的预测,将计算的泡点与实验测得的泡点作了比较,其拟合精度良好,关联结果令人满意,硅烷二元系、多元系的热力学模型及VLE数据可为该体系的分离设计提供必要的理论依据.     

碳酸二甲酯-碳酸二乙酯-甲醇三元体系相平衡数据的推算

采用双循环汽液平衡釜测定了常压下碳酸二甲酯-碳酸二乙酯、碳酸二甲酯-甲醇、碳酸二乙酯-甲醇三组二元体系的汽液平衡数据,实验数据经Herington面积积分法检验符合热力学一致性。用Wilson模型分别对实验数据进行了关联,利用关联出的模型参数计算相应的汽相组成,并与实验值比较,二者符合良好。利用二元体系的汽液平衡数据,由Wilson方程推算了碳酸二甲酯-碳酸二乙酯-甲醇三元体系的汽液平衡数据。为建立碳酸二乙酯和碳酸二甲酯、甲醇的精馏分离数学模型提供了基础数据。     

甲醇-乙酸-丙酸多元体系汽液平衡

用新型泵式沸点仪测定了在100kPa下甲醇-乙酸、甲醇-丙酸、乙酸-丙酸3个二元体系以及甲醇-乙酸-丙酸三元系在不同液相组成时的沸点,并用间接法T-p-x(温度、压力和液相摩尔分数)推算了3个二元体系的汽相平衡组成。3个二元体系活度系数分别用Wilson模型、NRTL模型、Margules模型和van Laar模型进行关联,用最小二乘法求出了它们的液相活度系数模型参数,同时,用这些模型参数来计算它们的汽相摩尔分数。所得的液相活度系数来计算3个二元体系的过量吉布斯自由能函数,且所研究的所有体系中各组分之间不存在共沸点。用3个二元体系Wilson模型参数对所测的三元体系数据进行关联,建立该系统汽液平衡的热力学模型并计算平衡时的汽相摩尔分数和泡点温度。由面积积分法检验这些模型参数计算的3个二元体系相平衡数据,得到很好的热力学一致性。     

Vapor-liquid equilibria for (methyl tertiary butyl ether+methanol+octane) and (methyl tertiary butyl ether+methanol+i-octane) systems at atmospheric pressure

Isobaric vapor-liquid equilibria (VLE) of two ternary systems (methyl tertiary butyl ether+methanol+ octane and methyl tertiary butyl ether+methanol+i-octane) were measured at atmospheric pressure by using a modified Othmer-type circulation apparatus. The VLE data of these ternary systems can be predicted by Wilson equation with the parameters determined by VLE data of constituent binary systems.     

丙酮-异丙醇-甲基烯丙醇体系气液平衡数据测定及关联

采用双循环气液平衡釜,测定了常压(101.3 kPa)下丙酮-甲基烯丙醇和异丙醇-甲基烯丙醇二元体系以及部分丙酮-异丙醇-甲基烯丙醇三元体系的气液平衡数据。二元气液平衡数据经Herington面积检验法检验,符合热力学一致性。用Wilson和NRTL液相活度系数方程对两个二元体系的气液平衡数据进行关联,效果良好。由关联得到的两个二元体系的Wilson和NRTL模型参数,及Aspen Plus数据库中的丙酮-异丙醇体系的Wilson和NRTL模型参数预示部分三元体系的气液平衡数据,与实验值相比,丙酮、异丙醇和甲基烯丙醇气相摩尔分率平均绝对偏差分别小于0.0137、0.0113、0.0117。实验数据和关联结果为该三元体系的精馏分离提供了一定的基础数据。     

甲基二氯硅烷-甲基三氯硅烷-苯三元体系等压汽液平衡

利用新型泵式沸点仪,在101.3 kPa下测定了甲基二氯硅烷-甲基三氯硅烷-苯体系以及3个二元体系在不同液相组成时的沸点;对所测的二元系数据,采用间接法由TPx推算了与之平衡的汽相组成,再用最小二乘法分别求出了二元体系的Wilson、NRTL、Margules和van Laar 4种模型的最佳配偶液相活度系数模型参数,并由二元最佳配偶参数推算了甲基二氯硅烷-甲基三氯硅烷-苯三元体系的气相组成和泡点温度,与实验测得的温度值进行了比较,其拟合精度良好,关联结果令人满意.     

二甲基硫醚-二硫化碳-甲醇体系等压汽液平衡

用泵式沸点仪测定了100 kPa下二甲基硫醚-二硫化碳、二甲基硫醚-甲醇2个二元系以及二甲基硫醚-二硫化碳-甲醇三元系在不同液相组成时的汽液平衡数据,用Wilson、NRTL、Margules和van Laar模型分别对2个二元系活度系数进行关联,用最小二乘法求出其液相活度系数模型参数,用这些模型参数来计算其汽相组成y,根据过量Gibbs自由能函数Q(GE/RT),采用间接法由Tpx推算了2个二元系的汽相平衡组成。用所得的液相活度系数计算2个二元系的过量吉布斯自由能函数GE/RT,并由2个二元系与三元系回归出二硫化碳-甲醇二元系的NRTL模型参数。用3个二元系NRTL模型参数对所测的三元系数据进行关联,建立三元系汽液平衡的热力学模型并计算平衡时的汽相组成y和泡点温度。分别由Herington法和McDermott-Ellis法对2个二元系和三元系进行热力学一致性检验,结果表明这些相平衡数据满足热力学一致性。     

二甲基硫醚-吡啶-N,N-二甲基乙酰胺体系汽液平衡关联和预测

在101.325 kPa下用沸点仪测定了二甲基硫醚-吡啶、二甲基硫醚-N,N-二甲基乙酰胺、吡啶-N,N-二甲基乙酰胺3个二元体系以及二甲基硫醚-吡啶-N,N-二甲基乙酰胺三元体系不同液相组成时的汽液平衡数据,3个二元体系活度因子分别用Wilson、NRTL、Margules、van Laar和UNIQUAC模型进行关联,用最小二乘法求出了它们的液相活度因子模型参数,用这些模型参数计算它们的汽相组成。根据过量Gibbs自由能函数,采用间接法由Tpx预测了3个二元系的汽相平衡组成。用所得的液相活度因子计算3个二元体系的过量Gibbs自由能。3个二元体系的Wilson、NRTL、Margules、van Laar和UNIQUAC模型参数分别对所测的三元体系数据进行关联,建立该系统汽液平衡的热力学模型并计算平衡时的汽相组成和泡点温度。分别由Herington法和McDermott-Ellis法对3个二元体系和三元体系进行热力学一致性检验,结果表明这些相平衡数据满足热力学一致性。     

乙酸异丙酯-异丙醇-DMSO的等压汽液相平衡和萃取精馏模拟

在101.3 kPa压力下,采用汽液平衡釜测定了二元物系异丙醇+二甲基亚砜（DMSO）、乙酸异丙酯+DMSO和三元物系异丙醇+乙酸异丙酯+DMSO的汽液平衡数据。利用Van Ness点校验法检验以上气液平衡数据,结果表明,数据符合热力学一致性。采用NRTL、Wilson和UNIQUAC活度系数模型对二元数据进行了拟合,并进行了三元物系汽液相平衡数据预测,结果表明,回归数据和实验数据吻合良好。Wilson模型的预测结果优于NRTL和UNIQUAC模型。一定量DMSO的加入可消除异丙醇和乙酸异丙酯的共沸点,因此,DMSO可作为一种有效的萃取剂来萃取精馏分离此二元物系。然后,通过流程模拟软件Aspen Plus,使用获得的二元交互作用参数对三元系统的萃取精馏进行了模拟。讨论了在不同的操作条件（塔板数、进料位置、溶剂比和回流比）下,异丙醇和乙酸异丙酯分离的情况,得到了最适宜的操作条件。