pH‐ and temperature‐responsive IPN hydrogels based on soy protein and poly(N‐isopropylacrylamide‐co‐sodium acrylate)

pH‐ and temperature‐responsive interpenetrating polymer network (IPN) hydrogels based on soy protein and poly(N‐isopropylacrylamide‐co‐sodium acrylate) were successfully prepared. The structure and properties of the hydrogels were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry, and thermogravimetric analyzer. The equilibrium and dynamic swelling/deswelling behaviors and the drug release properties of the hydrogels responding to pH and/or temperature were also studied in detail. The hydrogels have the porous honeycomb structures, good miscibility and thermal stability, and good pH‐ and temperature‐responsivity. The volume phase transition temperature of the hydrogels is ca. 40°C. Changing the soy protein or crosslinker content could be used to control the swelling behavior and water retention, and the hydrogels have the fastest deswelling rate in pH 1.2 buffer solutions at 45°C. Bovine serum albumin release from the hydrogels has the good pH and temperature dependence. The results show that the proposed IPN hydrogels may have potential applications in the field of biomedical materials such as in drug delivery systems. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39781.     

Swelling–deswelling kinetics of poly(N‐isopropylacrylamide) hydrogels formed in PEG solutions

A series of poly(N‐isopropylacrylamide) (PNIPA) hydrogels was prepared by free‐radical crosslinking copolymerization of N‐isopropylacrylamide (NIPA) and N,N′‐methylenebisacrylamide (BAAm) in aqueous solutions of poly(ethylene glycol) of molecular weight 300 g/mol (PEG). The amount of PEG in the polymerization solvent, the crosslinker (BAAm) content, and the gel preparation temperature (T_prep) were varied in the gelation experiments. The hydrogels were characterized by the equilibrium swelling and elasticity tests as well as by the measurements of the deswelling–reswelling kinetics of the hydrogels in response to a temperature change between 25 and 48°C. The rate of deswelling of the swollen gel increases while the rate of reswelling of the collapsed gel decreases as the amount of PEG in the polymerization solvent is increased or as the crosslinker content is decreased. The T_prep effect on the swelling kinetics of the hydrogels was only observed if the PEG content of the polymerization solvent is less than 20%, which is explained with the screening of H‐bonding interactions in concentrated PEG solution. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 37–44, 2006     

Synthesis,characterization and,swelling behavior of semi‐IPN nanocomposite hydrogels of alginate with poly(N‐isopropylacrylamide) crosslinked by nanoclay

pH and temperature responsive nanocomposite hydrogels were synthesized with sodium alginate (NaAlg), N‐isopropylacrylamide (NIPA), and nanoclay. The structure, morphology, thermal behavior, and swelling and deswelling behaviors of the hydrogels were studied. The NaAlgm/PNIPA/Clayn hydrogels revealed a highly porous structure in which the pore sizes decreased and the amount of pores increased with increasing the nanoclay content in the hydrogels. PNIPA retained its own characteristics regardless of the amount of NaAlg and nanoclay. The effect of pH and nanoclay content on the swelling and effect of temperature on the deswelling behavior were investigated. The equilibrium swelling ratios of the nanocomposite hydrogels increased with increasing the pH from 2 to 6. The maximum swelling was attained at pH 6. Deswelling increased with increasing the nanoclay content in the hydrogels. The hydrogels were found to be pH and temperature responsive. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43222.     

Temperature‐sensitive poly(N‐tert‐butylacrylamide‐co‐acrylamide) hydrogels bonded on cotton fabrics by coating technique

Different from the conventional method of developing stimuli‐sensitive textiles by graft copolymerization of environmental responsive polymers onto the fabric, the coating technique was applied to bond temperature‐sensitive hydrogels with cotton fabric through chemical covalent in our work. A temperature‐sensitive linear copolymer of N‐tert‐butylacrylamide (NTBA) and acrylamide (AAm) was prepared in methanol. Then, the cotton fabrics were coated using an aqueous solution of this copolymer containing 1,2,3,4‐butanetertracarboxylic acid as a crosslinker and sodium hypophosphite (SHP) as a catalyst, followed by drying and curing. The surface of the cotton fabrics was bonded on more or less coatings of poly (NTBA‐co‐AAm) hydrogels, as verified by Fourier transform infrared spectroscopy and scanning electron microscopy images. The poly(NTBA‐co‐AAm) hydrogels‐coated fabrics exhibited temperature sensitive, and the temperature interval of the deswelling transition was higher than lower critical solution temperature of linear copolymer solution. The coated fabrics presented good water‐impermeable ability because of the swelling of hydrogels bonded, especially when the add‐on was as high as 14.14%. Environmental scanning electron microscopy images revealed that coating hydrogels swelled and covered on the surface as a barrier to prevent water from penetrating once the coated fabric came into contact with water. The findings demonstrate that the temperature‐sensitive hydrogels can be covalently bonded on the cotton fabrics by coating technique and the coated fabrics have potential on immersion fabrics. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and swelling properties of a pH‐ and temperature‐dual responsive hydrogel by inverse microemulsion polymerization

A novel pH‐ and temperature‐dual responsive hydrogel was synthesized by inverse microemulsion polymerization, using itonic acid (IA) as pH‐responsive monomer, N‐isopropylacrylamide (NPAM) as thermo‐responsive monomer and acrylamide (AM) as the nonionic hydrophilic monomer. Factors affecting water and salt absorption, as well as swellability of the dual responsive hydrogels, such as IA/NPAM mass ratio and crosslinker amount, were investigated. pH‐ and temperature‐sensitivity and dynamic viscoelasticity behaviors of the dual responsive hydrogels were also studied. The dual responsive responsive hydrogels showed suitable water and salt absorbency, remarkable pH‐, and temperature‐sensitivity, adjustable swellability and enhanced viscoelastic behaviors under high stress. Water absorbency and pH‐sensitivity increased while salt absorbency and temperature‐ sensitivity decreased with increasing IA/NIPAM mass ratio. Both water absorbency and salt absorbency increased first with crosslinker amount increased to 0.2 wt %, and then decreased with increasing crosslinker amount. Temperature‐induced shrinkage range of the dual responsive hydrogels was higher and broader than that of the conventional poly(N‐isopropylacrylamide) hydrogel. TEM indicated that the as‐synthesized hydrogel particles were regular and spherical‐like in shape and had the mean particle size of 49nm in the range of 30–78 nm. FTIR indicated the structure of the dual responsive hydrogels. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42139.     

Microwave‐assisted preparation of temperature sensitive poly(N‐isopropylacrylamide) hydrogels in poly(ethylene oxide)‐600

In this article, a series of poly(N‐isopropylacrylamide) (PNIPAM)‐based hydrogels were prepared under microwave irradiation using poly(ethylene oxide)‐600 (PEO‐600) as reaction medium and microwave‐absorbing agent as well as pore‐forming agent. All of the temperature measurements, gel fractions, and FTIR analyses proved that the PNIPAM hydrogels were successfully synthesized. Within 1 min, the PNIPAM hydrogel with a 98% yield was obtained under microwave irradiation. The PNIPAM hydrogels thus prepared exhibited controllable properties such as pore size, equilibrium swelling ratios, and swelling/deswelling rates when changing the feed weight ratios of monomer (N‐isopropylacrylamide, NIPAM) to PEO‐600. These properties are well adapted to the different requirements for their potential application in many fields such as biomedicine. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4177–4184, 2006     

Reentrant phase transition and fast responsive behaviors of poly{N‐[3‐(dimethylaminopropyl)] methacrylamide} hydrogels prepared in poly(ethylene glycol) solutions

Macroporous temperature‐sensitive poly {N‐[3‐(dimethylaminopropyl)] methacrylamide} hydrogels were synthesized by free‐radical crosslinking polymerization of the monomer N‐[3‐(dimethylaminopropyl)] methacrylamide and the crosslinker N,N′‐methylenebisacrylamide in aqueous solutions at 22°C. Poly(ethylene glycol) (PEG) with a molecular weight of 1000 g/mol was used as the pore‐forming agent during the polymerization reaction. The concentration of PEG in the polymerization solutions was varied between 0 and 18 wt %, whereas the crosslinker (N,N′‐methylenebisacrylamide) concentration was fixed at 2 wt % (with respect to the monomer). The effects of the PEG concentration on the thermo‐induced phase‐transition behavior and the chemical structure, interior morphology, and swelling/deswelling kinetics were investigated. Normal‐type hydrogels were also prepared under the same conditions without PEG. An interesting feature of the swelling behavior of both the normal‐type and macroporous hydrogels was the reentrant phase transition, in which the hydrogels collapsed once and reswelled as the temperature was continuously increased. Scanning electron micrographs revealed that the interior network structure of the hydrogels prepared in PEG solutions became more porous with an increase in the PEG concentration in the polymerization solution. This more porous matrix provided numerous water channels for water diffusion in or out of the matrix and, therefore, an improved responsive rate to external temperature changes during the deswelling and swelling processes. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Functionalization of hybrid poly(n‐isopropylacrylamide) hydrogels for Escherichia coli cell capture via adsorbed intermediate dye molecule

Poly(n‐isopropylacrylamide) Laponite (PNIPAM‐Lap) hybrid hydrogels, which use the synthetic clay Laponite as a crosslinker, permanently adsorb cationic laser dyes out of solution. This proof‐of‐concept expounds on this capability by adsorbing an intermediate dye molecule and using it as the foundation for successfully conjugating microbial antibodies to the surface of a PNIPAM hydrogel. The study involves using acriflavinium chloride molecules, adsorbed by a PNIPAM‐Lap hydrogel from an acriflavine laser dye solution, as an intermediate molecule to attach antibodies raised against E. coli to the hydrogel and demonstrate cell capture. Furthermore, this system exemplifies a novel biotechnological platform for greatly expanding PNIPAM hydrogels' capabilities and applicability through conjugation chemistry to surface‐bound molecules. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41557.     

Temperature and pH effects on the stability and rheological behavior of the aqueous suspensions of smart polymers based on N‐isopropylacrylamide,chitosan, and acrylic acid

This study describes the stability and rheological behavior of suspensions of poly(N‐isopropylacrylamide) (PNIPAM), poly(N‐isopropylacrylamide)‐chitosan (PNIPAM‐CS), and poly(N‐isopropylacrylamide)‐chitosan‐poly(acrylic acid) (PNIPAM‐CS‐PAA) crosslinked particles sensitive to pH and temperature. These dual‐sensitive materials were simply obtained by one‐pot method, via free‐radical precipitation copolymerization with potassium persulfate, using N,N′‐methylenebisacrylamide as a crosslinking agent. Incorporation of the precursor materials into the chemical networks was confirmed by elementary analysis and infrared spectroscopy. The influence of external stimuli such as pH and temperature, or both, on particle behavior was investigated through rheological measurements, visual stability tests, and analytical centrifugation. The PNIPAM‐CS particles showed higher stability in acid and neutral media, whereas PNIPAM‐CS‐PAA particles were more stable in neutral and alkaline media, both below and above the lower critical solution temperature of PNIPAM (stability data). This is due to different interparticle interactions as well as those between the particles and the medium (also evidenced by rheological data), which were also influenced by the pH and temperature of the medium. Based on the results obtained, we found that the introduction of pH‐sensitive polymers to crosslinked PNIPAM particles not only produced dual‐sensitive materials but also allowed particle stability to be adjusted, making phase separation faster or slower, depending on the desired application. Thus, it is possible to adapt the material to different media. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Photo‐cross‐linked biodegradable thermo‐ and pH‐responsive hydrogels for controlled drug release

A new strategy was developed to prepare thermo‐ and pH‐sensitive hydrogels by the crosslinking of poly(N‐isopropylacrylamide) with a biodegradable crosslinker derived from poly(L ‐glutamic acid). Hydrogels were fabricated by exposing aqueous solutions of precursor containing photoinitiator to UV light irradiation. The swelling behaviors of hydrogels at different temperatures, pHs, and ionic strengths were examined. The hydrogels shrank under acidic condition or at temperature above their collapse temperature and would swell in neutral or basic media or at lower temperature. These processes were reversible as the pH or temperature changed. All hydrogels exhibited no weight loss in the simulated gastric fluid but degraded rapidly in the simulated intestinal condition. Bovine serum albumin were used as a model protein drug and loaded into the hydrogels. The in vitro drug release experiment was carried out at different pH values and temperatures. The pH and temperature dependent release behaviors indicated the promising application of these materials as stimuli‐responsive drug delivery vehicles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Synthesis and characterization of fast responsive thermo‐ and pH‐sensitive poly[(N,N‐diethylacrylamide)‐co‐(acrylic acid)] hydrogels

BACKGROUND: A considerable amount of research has been focused on smart hydrogels that can respond to external environmental stimuli, especially temperature and pH. In this study, fast responsive thermo‐ and pH‐sensitive poly[(N,N‐diethylacrylamide)‐co‐(acrylic acid)] hydrogels were prepared by free radical copolymerization in aqueous solution using poly(ethylene glycol) (PEG) as a pore‐forming agent. RESULTS: Swelling studies showed that the hydrogels produced had both temperature and pH sensitivity. The deswelling kinetics at high temperature demonstrated that the shrinking rates were influenced by the addition of the pore‐forming agent and the amount of acrylic acid in the initial total monomers. The deswelling curves in low‐buffer solutions had two stages. Pulsatile swelling studies indicated that the PEG‐modified hydrogels were superior to the normal ones. These different swelling properties were further confirmed by the results of scanning electron microscopy. CONCLUSION: Such fast responsive thermo‐ and pH‐sensitive hydrogels are expected to be useful in biomedical fields for stimuli‐responsive drug delivery systems. Copyright © 2008 Society of Chemical Industry     

Macroporous dehydroalanine polymer hydrogel with fast temperature response and high repetition durability

Thermoresponsive hydrogels based on poly(methyl 2‐isobutyramidoacrylate) (PMIBA) were prepared by free‐radical crosslinking polymerization of the corresponding monomer using N,N′‐methylenebisacrylamide as a crosslinker. The PMIBA hydrogels showed a reversible temperature‐induced volume change with a volume phase transition temperature (VPTT) at 19°C, while they contained more than 60 wt % water even in the equilibrium deswollen state. When the external temperature was raised rapidly above the VPTT, the PMIBA gels shrank smoothly with time at a faster rate than conventional poly(N‐isopropylacrylamide) hydrogels of the same size. The fast and smooth deswelling response of the PMIBA gel is ascribed to its sponge‐like structure with 0.1–1 µm pore sizes formed in the deswollen state. The smooth deswelling response due to the macroporous structure resulted in high durability against repeated changes in the external temperature. The PMIBA gel showed little degradation in the swelling ability when subjected to 50 times of thermal cycling across the VPTT. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2013     

Dual‐stimuli‐responsive polymer‐coated mesoporous silica nanoparticles used for controlled drug delivery

In this article, a temperature‐ and pH‐responsive delivery system based on block‐copolymer‐capped mesoporous silica nanoparticles (MSNs) is presented. A poly[2‐(diethylamino)ethyl methacrylate)] (PDEAEMA)‐b‐poly(N‐isopropyl acrylamide) (PNIPAM) shell on MSNs was obtained through the surface‐initiated atom transfer radical polymerization. The block copolymer PDEAEMA‐b‐PNIPAM showed both temperature‐ and pH‐responsive properties. The release of the loaded model molecules from PDEAEMA‐b‐PNIPAM‐coated MSNs could be controlled by changes in the temperature or pH value of the medium. The as‐desired drug‐delivery carrier may be applied to biological systems in the future. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42395.     

Modified carrageenan. 4. Synthesis and swelling behavior of crosslinked κC‐g‐AMPS superabsorbent hydrogel with antisalt and pH‐responsiveness properties

To synthesize a novel biopolymer‐based superabsorbent hydrogel, 2‐acrylamido‐2‐methylpropanesulfonic acid (AMPS) was grafted onto kappa‐carrageenan (κC) backbones. The graft copolymerization reaction was carried out in a homogeneous medium and in the presence of ammonium persulfate (APS) as an initiator, N,N,N′,N′‐tetramethyl ethylenediamine (TMEDA) as an accelerator, and N,N′‐methylene bisacrylamide (MBA) as a crosslinker. A proposed mechanism for κC‐g‐AMPS formation was suggested and the hydrogel structure was confirmed using FTIR spectroscopy. The affecting variables on swelling capacity, i.e., the initiator, the crosslinker, and the monomer concentration, as well as reaction temperature, were systematically optimized. The swelling measurements of the hydrogels were conducted in aqueous solutions of LiCl, NaCl, KCl, MgCl₂, CaCl₂, SrCl₂, BaCl₂, and AlCl₃. Due to the high swelling capacity in salt solutions, the hydrogels may be referred to as antisalt superabsorbents. The swelling of superabsorbing hydrogels was measured in solutions with pH ranging 1 to 13. The κC‐g‐AMPS hydrogel exhibited a pH‐responsiveness character so that a swelling–deswelling pulsatile behavior was recorded at pH 2 and 8. The overall activation energy for the graft copolymerization reaction was found to be 14.6 kJ/mol. The swelling kinetics of the hydrogels was preliminarily investigated as well. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 255–263, 2005     

Chitosan–Quercetin Bioconjugate as Multi‐Functional Component of Antioxidants and Dual‐Responsive Hydrogel Networks

Multifunctional hydrogels based on chitosan–quercetin (CHITQ) conjugate are prepared by a thermo‐induced radical procedure in the presence of N‐isopropylacrylamide (NIPAAm), acrylamide (AAm), and N,N′‐methylenebis(acrylamide) (MEBA). At first, quercetin (Q) is grafted onto chitosan backbone with a functionalization degree of 275 mg of Q per gram of conjugate, as calculated by ¹H‐NMR analyses to impart antioxidant properties to the polysaccharide. Then, a pH and temperature sensitive hydrogel was obtained by involving CHITQ and NIPAAm in the polymerization reaction. The accessibility of phenolic moieties is modified in response to the hydrogel swelling/deswelling, as confirmed by antioxidant tests performed at different temperatures. Dual stimuli‐responsive hydrogels are proposed for the delivery of caffeine as model drug. The release profiles of caffeine depict a system particularly performing as on/off device at acidic pH with excellent applicability prospects.     

Preparation and properties of temperature‐sensitive soy protein/poly(N‐isopropylacrylamide) interpenetrating polymer network hydrogels

Temperature‐sensitive interpenetrating polymer network (IPN) hydrogels based on soy protein and poly(N‐isopropylacrylamide) were successfully prepared. The structure and properties were systematically characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, differential scanning calorimetry and thermogravimetric analysis, and the swelling and deswelling behavior was also investigated. It was found that the hydrogels had good miscibility, thermal stability and temperature sensitivity, and the lower critical solution temperature was ca 32 °C. Changing the content of soy protein or crosslinker could be used to control the swelling behavior, water retention and network structure of the IPN hydrogels. The results show that the novel IPN hydrogels may be of potential interest in drug delivery systems. Copyright © 2011 Society of Chemical Industry     

Synthesis of poly(N,N‐diethylacrylamide‐co‐acrylic acid) hydrogels with fast response rate in NaCl medium

A series of thermo‐ and pH‐sensitive poly (N,N‐diethylacrylamide‐co‐acrylic acid) (P(DEA‐co‐AA)) hydrogels were prepared in NaCl aqueous solutions with different concentrations. Swelling and deswelling studies showed that in comparison with conventional P(DEA‐co‐AA) hydrogels (prepared in distilled water), the P(DEA‐co‐AA) hydrogels thus prepared had almost the same volume phase transition temperature (VPTT), but exhibited much faster response rates as the temperature was raised above their VPTT. Besides, the hydrogels prepared by this method had faster response rates in low pH buffer solutions, and the response rates increased with the increased concentration of the NaCl solutions used during the polymerization. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Near‐Infrared Light‐Triggered Dual Drug Release Using Gold Nanorod‐Embedded Thermosensitive Nanogel‐Crosslinked Hydrogels

Gold nanorod (AuNR)‐embedded poly(N‐isopropylacrylamide) (PNIPAM) hydrogels offer the possibility of achieving near‐infrared (NIR) light‐triggered drug release. In addition, using nanoparticles as a crosslinker can enhance the mechanical properties of PNIPAM hydrogels, and nanoparticle‐crosslinked hydrogels provide an important approach for dual drug release. Here, NIR light‐triggered dual drug release using AuNR‐embedded thermosensitive nanogel‐crosslinked hydrogels is reported for the first time. Two kinds of drugs are encapsulated, one in the nanogel and the other in the hydrogel. The volume phase transition of the PNIPAM hydrogels is induced by NIR light by utilizing the photothermal effect of AuNRs. By changing the number of embedded AuNRs and the intensity of NIR light, the release rate and drug quantity can be adjusted for on‐demand release. Because of its NIR light‐triggering and nanoparticle‐crosslinking capabilities, AuNR‐embedded thermosensitive nanogel‐crosslinked hydrogels may expand the application scope of hydrogels and provide enhanced properties in their applications.     

Thermo‐ and pH‐sensitive poly(vinylmethyl ether)/carboxymethylchitosan hydrogels crosslinked using electron beam irradiation or using glutaraldehyde as a crosslinker

BACKGROUND: Stimuli‐sensitive or intelligent hydrogels have been investigated for many biomedical and pharmaceutical applications. Those hydrogels with dual sensitivity will have more extensive potential applications. The aim of the work presented was to prepare a series of thermo‐ and pH‐sensitive hydrogels based on poly(vinylmethyl ether) (PVME) and carboxymethylchitosan (CMCS). The hydrogels were crosslinked using electron beam irradiation (EB) or using glutaraldehyde (GA) as a crosslinker at room temperature. RESULTS: The structures of the PVME/CMCS hydrogels obtained using the two crosslinking methods are proposed. The effects of component polymer ratio, GA content, irradiation dose, temperature and pH on the swelling behavior of the PVME/CMCS hydrogels were studied. There is a sharp decrease in the swelling ratios when the temperature increases from 25 to 37 °C. At low pH and also at high pH, the hydrogels have a higher swelling ratio; however, deswelling occurs evidently at a pH of around 3. CONCLUSION: The study shows that both EB and GA crosslinked hydrogels are thermo‐ and pH‐ sensitive, simultaneously. Thus, they may be potential candidates for both thermo‐ and pH‐sensitive applications. Copyright © 2009 Society of Chemical Industry     

Synthesis,characterization, and swelling behavior of new pH‐sensitive hydrogels derived from copolymers of 2‐hydroxyethyl methacrylate and 2‐(diisopropylamino)ethylmethacrylate

The aim of this work was to synthesize and to characterize new pH‐sensitive hydrogels that can be used in the controlled release of drugs, useful for dermal treatments or ophthalmology's therapies. Copolymers containing 2‐hydroxyethyl methacrylate (HEMA) with different amounts of 2‐(diisopropylamino)ethyl methacrylate (DPA) (10 and 30 wt %) and different amounts of crosslinker agent, ethylene glycol dimethacrylate (EGDMA) (1 and 3 wt %) were prepared by bulk photo‐polymerization. The copolymers were fully characterized by using Fourier‐transform infrared (FTIR) spectra, differential scanning calorimetry, thermogravimetric analysis, UV–visible spectroscopy, and measuring water content and dynamic swelling degree. The results show that modifications in the amount of DPA and/or crosslinker in the hydrogel produce variations in the thermal properties. When adding of DPA, we observed an increase in the thermal stability and decomposition temperature, as well as a change in the mechanism of decomposition. Also a decrease in the glass transition temperature was observed with regard to the value for pure pHEMA, by the addition of DPA. The water content of the hydrogels depends on the DPA content and it is inversely proportional to both the pH value and the crosslinking degree. Pure poly‐HEMA films did not show important changes over the pH range studied in this work. The dynamic swelling curves show the overshooting effect associated with the incorporation of DPA, the pH of the solution, and the crosslinking density. On the other hand, no important variations in the optical properties were observed. The synthesized hydrogels are useful as a drug delivery pH‐sensitive matrix. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013