共轴八旋翼无人飞行器的偏航静态抗饱和补偿控制

设计了一种共轴八旋翼无人飞行器,与四旋翼飞行器相比,其具有更大的驱动能力、更强的带载能力和一定的冗余能力．首先,建立了飞行器的动力学模型．针对共轴八旋翼飞行器偏航运动能力比俯仰、滚转运动能力弱,偏航容易出现执行器饱和现象的问题,从实际工程出发提出了基于线性自抗扰控制器的静态抗饱和补偿器．线性自抗扰算法易于工程调节,能够实时估计与补偿外界扰动．静态抗饱和补偿器不增加系统阶次,有效抑制偏航执行器饱和．利用李亚普诺夫稳定理论证明了基于线性自抗扰控制器的静态抗饱和偏航控制系统的稳定性．最后,通过共轴八旋翼飞行器的仿真实验与原型机比较实验验证了算法的有效性与鲁棒性．原型机实验结果表明：在室内固定干扰下,执行器退出饱和的最长时间约为4 s,偏航角误差收敛到±0.085 rad;在室外变干扰下,执行器退出饱和的最长时间约为9 s,偏航角误差收敛到±0.127 rad．基于线性自抗扰控制器的静态抗饱和补偿器在外界干扰情况下能够有效地抑制执行器饱和,具有良好的偏航控制性能与强鲁棒性．     

四旋翼无人机姿态系统的非线性容错控制设计

本文研究了四旋翼无人机执行器发生部分失效时的姿态控制问题.通过分析其动力学特性,将执行器故障以乘性因子加入系统模型,得到执行器故障情况下四旋翼无人机的姿态动力学模型.在同时存在未知外部扰动和执行器故障的情况下,设计了一种基于自适应滑模控制的容错控制器.利用基于Lyapunov的分析方法证明了所设计控制器的渐近稳定性.在四旋翼无人机实验平台上进行了实验,验证了该算法对存在未知外部扰动和执行器部分失效时四旋翼无人机的姿态控制具有较好的鲁棒性.     

四旋翼无人机的室内自主飞行控制

为了解决四旋翼无人机在室内等无GPS信号的复杂环境中实现自主飞行的问题,在对四旋翼无人机进行非线性建模的基础上,分别设计了基于反步法结合滑模理论的姿态控制器和基于PID的位置控制器.考虑到激光测距仪高昂的价格,提出一种基于红外传感器和扩展卡尔曼算法(EKF)实现无人机室内自主飞行定位的方法,通过无人机的旋转运动弥补红外传感器每次只能测量单一点距的缺陷.最后,通过仿真验证所设计的控制器和定位算法的性能.Wyfh2结果证明了所设计的四旋翼无人机室内自主飞行方法的有效性和可靠性.     

具有执行器故障的四旋翼无人机有限时间容错控制

本文主要研究了四旋翼无人机在外部干扰、执行器存在部分失效和偏置故障并发情况下有限时间轨迹跟踪的控制问题. 通过分析四旋翼无人机动力学特性, 构建了带有外部干扰、执行器机构故障的动力学模型. 基于鲁棒全局快速终端滑模控制算法, 设计了一种有限时间容错控制器, 提高了系统对故障的响应速度. 其次, 针对常值/时变故障和干扰,在控制器设计中采用改进的连续函数进行补偿, 减少了由切换函数引起的系统抖振, 并基于Lyapunov函数对控制器的稳定性进行了分析. 最后, 通过仿真实验验证了所设计控制器的有效性和可靠性, 同时存在执行器故障和外部干扰的情况下, 无人机能够实现较好的轨迹跟踪性能.     

自抗扰PID四旋翼飞行器控制方法研究

针对传统PID控制算法不能很好地适应非线性被控系统、鲁棒性较弱、抗扰能力差等缺点,提出了一种基于传统PID控制与自抗扰控制结合的四旋翼飞行器控制方法。在传统PID控制器的基础上,对飞行器姿态解算过程中的不确定因素和外界干扰予以实时的观测和补偿。最后在Simulink中分别搭建传统串级PID控制器和自抗扰PID控制器的仿真模型,通过分析仿真结果得出自抗扰PID控制器的响应时间比传统串级PID控制器快约30%,稳态误差较传统串级PID控制器降低约15%,超调量降低约20%。由此得出自抗扰PID四旋翼飞行器控制方法能够很好地适应四旋翼飞行器非线性系统,达到抑制外界干扰以及补偿系统控制误差的效果。     

输出误差约束下四旋翼无人机预定性能反步控制

针对外界干扰和输出误差约束条件下的四旋翼无人机的跟踪控制问题,提出预定性能反步跟踪控制策略.首先,将四旋翼无人机动力学模型转换为带有外界干扰的严反馈形式;然后,利用反步法设计控制器,通过引入障碍Lyapunov函数保证跟踪误差的预定性能,设计干扰观测器对外界干扰进行估计,并通过滤波器估计姿态子系统中部分虚拟控制输入的导数;通过稳定性分析说明所设计的控制器可以保证跟踪误差的有界稳定性,且跟踪误差一直处于预设边界内;最后,通过仿真验证所设计控制策略的有效性.     

基于PID和LQR的四旋翼无人机控制系统研究

为提高四旋翼无人机的飞行稳定性、无人飞行器控制系统的鲁棒性和控制精度,以建立的四旋翼无人机飞行控制系统模型为基础,采用现代控制理论与传统控制论相结合的方法,针对姿态角速率、姿态角分别设计内环LQR(线性二次型调节器)控制器,及外环PID控制的双回路闲环控制器.充分利用PID控制器易于掌握且对模型要求精度低、LQR控制器能改善内回路的动态特性和稳态性能的特点,完成四旋翼无人机的飞行控制.通过实验遴选该双闭环控制器相关参数并进行优化,实验结果表明所设计的双回路控制器控制性能指标良好.     

四旋翼无人机的自适应反步跟踪控制北大核心CSCD

针对四旋翼无人机存在外界干扰情况下的姿态和位置的跟踪控制问题,提出了自适应反步控制策略。首先,通过对四旋翼无人机模型的分析,将其转化为带有外界干扰的严反馈形式;其次,采用自适应技术,实现对未知外界干扰上界的估计,并结合反步控制,分别设计姿态和位置的跟踪控制器;再次,基于Lyapunov稳定性理论证明了闭环系统的渐近稳定性;最后,通过数值仿真验证了所设计控制策略的有效性。仿真结果表明所设计的控制器具有较好的鲁棒性和跟踪性能。     

四旋翼无人机时延模糊自抗扰容错控制

针对四旋翼无人机系统执行器故障问题，为改善飞行控制系统性能，提出一种时延模糊自抗扰容错控制。首先，根据四旋翼无人机系统非线性数学模型和执行器故障模型，选择模糊自抗扰控制器作为基准控制器，在未发生执行器故障的情况下，使飞行控制系统保持稳定；其次，在发生执行器故障的情况下，利用时延控制技术估计故障信息，并与模糊自抗扰控制相结合，实现容错控制；最后，对所研究的容错控制算法进行数值仿真分析，仿真结果表明：把时延控制与模糊自抗扰控制相结合，能有效调节执行器故障，使飞行控制系统对故障产生的干扰具有良好的鲁棒性。     

基于浸入—不变集的三旋翼无人机高度系统自适应控制器设计

针对三旋翼无人机的研究集中于数学模型分析、简单的控制算法设计等起步阶段,且高度系统空气阻尼系数未知的情况,研究了三旋翼无人机高度系统的控制问题。基于浸入—不变集方法设计了一种控制三旋翼无人机跟踪目标高度的自适应控制器,根据三旋翼无人机飞行运动特点,推导了三旋翼无人机运动数学模型,完成了控制器参数设计和气动参数选择,采用Lyapunov分析方法对所设计控制器的渐近稳定性进行了理论证明,并对未知空气阻尼系数进行了在线估计,最终在三旋翼无人机实验平台上在环仿真实验验证。实验结果表明,高度跟踪误差在0-6秒可较好地趋于收敛,控制阻尼系数估计值也较好地收敛于合理的范围,表明该算法稳态误差小,收敛速度快,具有较好的控制性能和较强的实用性。     

煤矿井下安全监控分站的设计及其仿真实现

为了设计一种具有低成本、低功耗、易操作、功能强且可靠性高的煤矿井下安全分站,针对煤矿安全生产实际,文章提出了采用MCS-51系列单片机为核心、具有CAN总线通信接口的煤矿井下安全监控分站的设计方案;首先给出煤矿井下安全监控分站的整体构架设计,然后着重阐述模拟量输入信号处理系统的设计过程,最后说明单片机最小系统及其键盘、显示、报警、通信等各个组成部分的设计;为验证设计方案的可行性与有效性,使用Proteus软件对设计内容进行仿真验证,设计的煤矿井下安全监控分站具有瓦斯、温度等模拟量参数超标报警功能和电机开停、风门开闭等开关量指示功能;仿真结果表明:设计的煤矿井下安全监控分站具有一定的实际应用价值.     

View-based model-driven architecture for enhancing maintainability of data access services

In modern service-oriented architectures, database access is done by a special type of services, the so-called data access services (DAS). Though, particularly in data-intensive applications, using and developing DAS are very common today, the link between the DAS and their implementation, e.g. a layer of data access objects (DAOs) encapsulating the database queries, still is not sufficiently elaborated, yet. As a result, as the number of DAS grows, finding the desired DAS for reuse and/or associated documentation can become an impossible task. In this paper we focus on bridging this gap between the DAS and their implementation by presenting a view-based, model-driven data access architecture (VMDA) managing models of the DAS, DAOs and database queries in a queryable manner. Our models support tailored views of different stakeholders and are scalable with all types of DAS implementations. In this paper we show that our view-based and model driven architecture approach can enhance software development productivity and maintainability by improving DAS documentation. Moreover, our VMDA opens a wide range of applications such as evaluating DAS usage for DAS performance optimization. Furthermore, we provide tool support and illustrate the applicability of our VMDA in a large-scale case study. Finally, we quantitatively prove that our approach performs with acceptable response times.     

A pragmatic multi-method investigation of discrepant technological events: Coping,attributions, and ‘accidental’ learning

Discrepant technological events or situations that entail a problem, a misunderstanding or a difficulty with the Information Technology (IT) being employed, are common in the workplace, and can lead to frustration and avoidance behaviors. Little is known, however, about how individuals cope with these events. This paper examines these events by using a multi-method pragmatic approach informed by coping theory. The results of two studies – a critical incident study and an experiment – serve to build and test, respectively, a theoretical model that posits that individuals use a variety of strategies when dealing with these events: they experience negative emotions, make external attributions, and adopt engagement coping strategies directed at solving the event, eventually switching to a disengagement coping strategy when they feel they have no control over the situation. Furthermore, users’ efforts may result in ‘accidental’ learning as they try to overcome the discrepant IT events through engagement coping. The paper ends with a discussion of the results in light of existing literature, future opportunities for research, and implications for practice.     

The Distributed Time-Triggered Simulation Scheme: Core Principles and Supporting Execution Engine

Distributed real-time simulation is a young technology field but its practice is under increasing demands. In recent years the author and his collaborators have been establishing a new approach called the distributed time-triggered simulation (DTS) scheme which is conceptually simple and easy to use but widely applicable. The concept was initiated in the course of developing a new-generation object-oriented real-time programming scheme called the time-triggered message-triggered object (TMO) programming scheme. Some fundamental issues inherent in distributed real-time simulation that were learned during recent experimental studies are discussed along with some approaches for resolving the issues. An execution engine developed to support both the TMOs engaged in control computation and the TMOs engaged in DTS is also discussed along with its possible extensions that will enable significantly larger-scale DTSs.     

Software-Konfigurationsmanagement in großen Softwareprojekten

Zusammenfassung Mit zunehmender Größe der Softwaresysteme verschärfen sich die für die Software-Herstellung typischen Probleme: Beherrschen großer Objektmengen, Erhalten der Systemkonsistenz, Kontrolle der ständigen Änderungseinflüsse und Gewährleisten einer langen Lebensdauer. Die Disziplin Konfigurationsmanagement bildet den methodischen Ansatz, diese Probleme besser zu beherrschen. Software-Konfigurationsmanagement faßt die Herstellung von Softwaresystemen als eine Abfolge von kontrollierten Änderungen an gesicherten Zwischen- und Endergebnissen auf. Dargestellt werden die Objekte und Funktionen des Software-Konfigurationsmanagements sowie die hierfür in großen Software-Projekten benötigten Methoden, Instanzen und Hilfsmittel.     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and     

Editorial:Brain-machine interface(BMI) and cyborg intelligence

正Brain-machine interfaces(BMIs)aim at building a direct communication pathway between the brain and an external device,and represent an area of research where significant progress has been made during the past decade.Based on BMIs,mind information can be read out by neural signals to control     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and overseas to the world’s scientific circles,especially to stimulate     

SCIENCE CHINA Information Sciences SUBJECT INDEX TO VOLUME 57(2014)

正~~     

Information for Authors

正http://www.zju.edu.cn/jzus http://www.springerlink.com Aim The Journals of Zhejiang University-SCIENCE(A/B/C)are edited by the international board of distinguished Chinese and foreign scientists,and are aimed to present the latest developments and achievements in scientific research in China and overseas to the world’s scientific circles,especially to stimulate