共查询到19条相似文献,搜索用时 159 毫秒
1.
2.
3.
为建立物联网的体系结构,采用化整为零、分而治之的分层结构研究方法,构建了一种物联网体系结构模型。采用"化整为零、分而治之"的"分层结构"研究方法,拟提出一种物联网体系结构模型,以供参考。 相似文献
4.
5.
阐述多层架构的基本概念和ADO.NET数据库中间件的体系结构和连接模式。设计了油料装备管理系统的软件分层结构,以“配备标准”页面为例实现系统的多层架构。 相似文献
6.
自动测试系统指的是在对硬件系统的功能或者性能进行验证时需要的自动测试系统,自动测试系统由测试仪器、测试总线、测试开关和测试软件组成。自动测试软件是自动测试系统的核心。自动测试软件通过分层的体系结构实现通用化的设计,利用数据库和数据队列作为连接各层的桥梁。数据库、数据队列和分散的各层形成一个通用的自动测试软件。 相似文献
7.
8.
主动网络管理分层设计模式的探讨 总被引:4,自引:0,他引:4
通过对主动网络及主动网络管理体系结构的分析,探讨了一种主动网络管理的分层设计模式,对其中每一层的功能、设计要点及其相互关系进行了讨论,说明了基于此模式的主动网络管理软件能够很好地适应主动网络的特点及主动网络管理的需求。 相似文献
9.
针对嵌入式系统低处理能力和低存储空间的特点,设计了GUI平台的分层体系结构,并在此分层体系结构的基础上用C和C 语言实现。GUI平台中不但提供了绘图、窗口、编辑器、浏览器等窗口功能,而且设计了适合工控领域的波形显示器功能。波形显示器直接建立在内核驱动程序之上,具有数据波形显示、波形处理、图形旋转等强大的波形处理能力。此分层体系结构有利于用户对其功能地添加和修改。 相似文献
10.
11.
本文基于光机电一体化汽车自动测距预警及险警系统的系统结构和工作原理,探讨和研究了基于MPC5200的激光雷达汽车自动测距预警及险警系统的结构和设计,包括硬件结构、软件结构、关键技术等等有关要点。 相似文献
12.
针对战储物资信息资源利用现状,提出了基于工程化方法的战储物资信息资源规划方法,构建了战储物资系统业务模型、功能模型、数据模型和体系结构模型,规范了信息基础标准,为实现战储物资信息资源深度共享和提高战储物资保障能力奠定了基础。 相似文献
13.
论述的基于八叉树分解的岩矿储量估算方法,是针对现有的估算方法普遍存在着对已知数据要求过多、使用繁琐等缺点而提出来的。该方法具有对采样数据的要求不高、使用简便快捷的特点,用在普查阶段的岩矿储量估算有着明显的优越性。 相似文献
14.
Multi-agent system for cost estimation 总被引:1,自引:0,他引:1
The cost estimation now is a vital concern of every manufacturing firm, and many methods are available for cost estimation. In this paper , we build an novel architecture of multiagent system with each agent representing one kind of cost estimation method (distributed multi-agent system). The system first classifies the user's requests , then makes the expert agents to cooperate and compete to fulfill the task. The model is based on a fuzzy classification of cost estimation methods and a dynamic optimization of structure to make the agents to learn from the past (based on agent reputation). In this way, the amount of information exchange is considerably reduced. 相似文献
15.
《Journal of Systems Architecture》2000,46(13):1159-1173
In this paper, we describe a semi-automatic method for designing a programmable architecture related to high speed communication protocols. A case study of associative based architecture of high speed communication system is presented with a validation environment. The environment provides an interesting estimation using XILINX prototyping board including memories (content addressable memory, CAM, RAM, DPRAM). In our approach, we try to perform a rapid prototyping of such architecture and allow the designer to interact easily in order to customize the architecture according to application requirements. This method of validation provides important benefits in hardware prototyping: better validation environment and reduced time to give a real estimation for a large variety of applications. 相似文献
16.
17.
This paper presents a novel architecture for multi-rate control system with disturbance estimation and rejection using FPGA connected with sensors and actuators through IEEE 1451 standard. A signum function is used for estimation error correction. Estimated states are used to provide the control input at a rate higher or lower than the sample rate thus providing multi-rate control. An architecture is proposed to implement the proposed multi-rate controller in FPGA platform through IEEE 1451.0-2007 standard. The control scheme requires minimum analog hardware, namely comparator and digital to analog convertor and provides multi-bit resolution with multi-rate processing. 相似文献
18.
基于深度学习的二维人体姿态估计方法通过构建特定的神经网络架构,将提取的特征信息根据相应的特征融合方法进行信息关联处理,最终获得人体姿态估计结果,因其具有广泛的应用价值而受到研究人员的关注。从数据集基准、姿态估计方法和评测标准等方面,对近年来基于深度学习的二维人体姿态估计的诸多研究工作进行系统归纳与整理,将现有方法分为单人姿态估计方法与多人姿态估计方法,并分别从网络架构设计、输出特征表示和损失函数选取方面进行分析与总结。在此基础上,结合当前二维人体姿态估计所面临的挑战对其未来研究发展方向与应用前景进行展望。 相似文献
19.
器载计算机是航天器电气系统的重要组成部分,其可靠性对航天器能否完成任务至关重要。为了保证航天器上计算机在出现故障时仍能正常工作,对双机冗余器载计算机的体系结构、切换策略、判别准则等内容进行了研究,在保留主份机与双机切换电路、备份机与双机切换电路之间的状态工作信号的基础上,通过在主份机、备份机之间新增加一个状态工作信号,提出了一种改进的自主切换策略。实践表明,运用改进的自主切换策略,在双机切换电路中的自主切换模块出现故障时仍能实现自主切换,同时将比较器设计为软件,采用软件表决、软件选通的思路,消除了硬件比较器的关键单点故障,这些容错设计改进能有效地提高器载计算机系统的可靠性,对高可靠器载计算机设计与实现具有较好的工程参考意义。 相似文献