共查询到20条相似文献,搜索用时 421 毫秒
1.
单丹 《电子制作.电脑维护与应用》2015,(8)
针对电阻式液位传感器的不足之处,我们设计了一种利用霍尔器件作为传感元件的液位测量传感器,对霍尔式液位传感器的设计做了简单的介绍,对霍尔式液位传感器的工作过程和工作原理进行了讨论。 相似文献
2.
3.
4.
基于霍尔器件的非接触式角度传感器研制 总被引:4,自引:0,他引:4
霍尔元件是一种对磁场敏感的传感器件,具有防烟尘干扰、抗振动和成本相对低廉等优点;利用线性霍尔元件作为检测,采用微机细分方式,设计了一种可从0°到大于360°范围内角度进行非接触测量的系统,给出了角度测量的原理、电路的构成及设计方法,实验表明,该系统测量精度达到设计要求,可广泛应用于工程测量领域. 相似文献
5.
集成霍尔传感器的发展 总被引:5,自引:0,他引:5
首先总结了100多年来霍尔效应应用的三个阶段,然后介绍各种集成霍尔元件、集成霍尔传感器的原理、结构、特性和应用最后论及到当前新型的量子、等离子霍尔传感器。对霍尔传感器的发展趋势和特点进行了总结。 相似文献
6.
7.
李维平 《电子制作.电脑维护与应用》2008,(12)
错误:CD40110是上升沿计数,所以9014倒相不合理,虽然也能计数,但本应磁铁接近霍尔元件计数的变成离开霍尔元件计数,不符常理。另外,专门为一个霍尔元件提拱一个78L05显得浪费又复杂,在这里用一个电阻降压应是合适的,用一个数K的电阻就能满足要求(没有提供霍尔元件的型号参数不好测算)。 相似文献
8.
微张力测量模型设计与实验研究 总被引:5,自引:0,他引:5
对差分结构的霍尔式张力测量模型进行了研究,基于线性霍尔元件和悬臂梁设计了挠度参变量和转角参变量两种微张力测量模型.应用悬臂梁系统将待测张力转换为位移和转角的变化,并以它们为中间参变量,建立了张力与霍尔电压的线性关系,实现了用线性霍尔元件以磁敏的方式测量张力.模型的对称互补式设计,不仅抵消了非线性变量对测量的影响,还能提高信号输出幅度.模型的差分式电压输出,能够抑制共模干扰和零点漂移.两种模型均能实现单一线性变量测量,实验结果符合理论结论.对比实验研究表明,挠度参变量微张力测量模型的灵敏度和线性度均优于转角参变量微张力测量模型,论述了设计原理并给出了理论计算. 相似文献
9.
10.
本文论证了霍尔集成开关元件在风速传感器上的应用,同使用霍尔集成开产元件设计风束 时应注意的事项,并命同一个成功的范例。 相似文献
11.
12.
Laurent Chiesi Karim Haroud John A. Flanagan Rade S. Popovic 《Sensors and actuators. A, Physical》1997,60(1-3):5-9
A method for measuring a weak magnetic field with a Hall sensor is described. This method consists of chopping the magnetic field to be measured with a magnetic shield surrounding the Hall sensor. The magnetic shield is periodically driven into saturation by means of an excitation coil. Thus, the Hall device is alternately exposed to/shielded from the d.c. or slowly varying external field to be measured. During the time intervals when the magnetic shield is saturated, the external field passes and is detected by the Hall sensor. When it is not saturated the Hall sensor is shielded from the external field. This chopping method yields a magnetic measurement unaffected by 1/ƒ noise and offset errors of the Hall sensor, therefore improving its detectivity. 相似文献
13.
14.
15.
16.
17.
针对我国目前土沉降监测的自动化程度及仪器可靠性低、监测数据不及时、测量精度不高等问题,提出了一种新型基于霍尔效应的科学监测方法;这种方法采用多个霍尔器件组成阵列,将沉降磁环分布在土中,土的沉降会带动沉降磁环的跟随沉降,于是便会引起霍尔器件周围磁场强度发生相应的变化;利用霍尔效应监测霍尔器件周围磁场强弱并转化为相应的电信号,采用RS485总线通讯方式将采集到的数据实时上传至实验主机,主机对实验数据进行科学建模处理找到沉降磁环沉降位移与电信号的关系,并设计监测管理平台以实现对土沉降实时在线监测;通过实验验证这种监测方法监测精度高最大误差在0.4 mm、稳定性好,可以对多点实时在线监测,从而实现对土沉降的智能化高精度监测;在设计中可结合当前远程传输控制技术实现数据远程共享,具有更加广泛的应用前景。 相似文献
18.
19.
20.
In order to lower the short-circuit effect due to the measurement contacts, Vertical Hall Devices (VHDs) are generally designed either in bulky N-type silicon or in the deep N-well of high-voltage CMOS technologies. In this last case, VHD can benefit from on chip circuitry for offset and 1/f noise reduction, but HVCMOS remains a costly technology. Using spinning-current, HVCMOS compatible VHDs with a resolution of 76 μT rms over a 1.6-kHz bandwidth have been demonstrated. The VHD presented here is designed in the shallow N-well of a low-cost 0.35 μm standard CMOS technology. Unlike conventional VHD, its measurement contacts are located outside the sensor active area. FEM simulations and experimental results show that the new geometry suppresses the short-circuit effect and strongly reduces the intrinsic offset and noise. Thus, without any noise and offset reduction method, this new small VHD (63 μm2) reaches a resolution of 79 μT rms over a (5 Hz–1.6 kHz) bandwidth, and opens the way to the integration of 3D Hall sensors in low-cost standard CMOS technologies. 相似文献