共查询到20条相似文献,搜索用时 62 毫秒
1.
阐述了在PLC系统中用工业以太网连接变频器的优点,从系统架构、网络组态、网络控制、以及网络管理等四个方面介绍了PLC系统通过工业以太网连接变频器的应用开发和使用过程,为工厂自动化系统提供了一套如何控制和管理变频器的新思路. 相似文献
2.
3.
隧道监控系统中使用的检测设备、采集设备和信息发布设备等第三方设备通过分布在隧道中的区域控制器(PLC)集成到隧道监控系统中,本文分析了隧道监控设备的串行数据如何通过区域控制器(PLC)的PMCR单元传送到区域控制器(PLC)的CPU单元从而隧道监控设备的集成应用.总结了通讯的原理、软件编制方法和系统调试的过程. 相似文献
4.
以某公司玻璃配料控制系统为例,介绍了玻璃配料系统的系统结构、综合上位机和PLC通信的几种方式的特点,阐述了如何使用西门子公司提供的OPC接口和VB.NET实现上位机与西门子S7-200PLC之间的数据交互,通过实际应用,比较分析了OPC技术在监控系统的优势。 相似文献
5.
为了在电磁兼容测试时远程控制汽车的驾驶状态,研制了一套自动化汽车驾驶系统.驾驶系统中的电控单元基于PLC进行设计,并使用Step7对电控单元进行硬件组态和程序设计.PLC程序的核心功能是如何接收来自PC的指令,并转换成符合要求的控制电压信号,以此控制气动执行机构动作.介绍了VB.net环境下的上位机程序的设计与编译.PLC电控单元通过接收上位机的指令对气动控制器发送控制信号,从而实现对汽车驾驶状态的控制.系统完成后可手动或自动控制汽车的行驶状态,运行效果良好. 相似文献
6.
7.
分析了常见的基于PLC的监控系统的利弊,回顾了面向PLC的DDE和OPC服务器的特点和使用方法,提出了利用PLC的DDE和OPC服务器接口和通用软件开发工具来设计中小型监控系统的方案.详细地讨论了这种方案在污水处理监控系统中的具体应用. 相似文献
8.
9.
为了适应控制系统对体积、功耗、成本的更高要求,设计了基于WindowsCE的软PLC系统.该系统采用"编译+解释"方式实现了软PLC功能.实验结果表明,该系统具有体积小、功耗低、实时性好等特点,特别适合于中小型控制系统的使用.对软PLC解释器模块关于指令表语言程序的解释算法进行了重点阐述. 相似文献
10.
基于S7-400H冗余控制器的污水处理系统 总被引:1,自引:0,他引:1
介绍了基于PLC的某厂炼油污水处理冗余控制系统的硬件配置情况和如何使用现场总线和冗余技术提高信号传输的精度、准确性、系统的三层网络结构以及具体设备的特殊控制模式.该方案采用西门子S7-400H PLC控制系统,S7-400H PLC是西门子公司专为高端应用场合设计的冗余系统,其工作电源、通信网络设备、CPU、操作站均为冗余设置,一旦主系统发生故障,能够自动无缝切换到热备用系统,实现平稳的Master-Reserve转换,使整个系统可以容错运行,从而避免了传统的单机系统因故障停机而造成损失,大大增强了系统的稳定性和可靠性. 相似文献
11.
12.
对国网宁夏电力检修公司宁安运维站近2年来一次设备喷涂PRTV用量的统计数据进行分析整理,得出各类一次设备按照标准要求喷涂PRTV时的用量估算值,并针对现存作业中存在的问题,提出相应解决方案。 相似文献
13.
14.
深圳市远望谷信息技术股份有限公司 《中国自动识别技术》2006,(1):55-56
针对国家烟草管理的现状,有关主管部门在全国推行“行业卷烟生产经营决策管理系统工程”,利用条码等自动识别技术手段实时掌握全国的生产经营信息。但某卷烟厂此前的物流环节已经是“件烟成垛”运输,如何在尽可能保持原有企业管理体系的前提下,达到有关部门的数据统计要求,解决成垛卷烟的物流和信息流的交互与统一问题成为技改的核心。该项目成功的将条码识别与射频识别有机结合起来,为烟草行业信息化提供了生动的应用案例。 相似文献
15.
机车空调逆变电源设计 总被引:1,自引:0,他引:1
本文讨论的是机车空调逆变电源系统的设计与研究。该电源系统主要是由DC/DC的BOOST升压部分和DC/AC三相逆变部分两部分组成。DC/DC部分所得直流电压通过DC/AC部分逆变成三相交流电,供给空调机组工作。同时,为使电源系统能更可靠的运行,也设计了相应的故障检测、保护等辅助电路。 相似文献
16.
Cybernetics and Systems Analysis - 相似文献
17.
V. I. Donskoy 《Cybernetics and Systems Analysis》2012,48(2):233-241
The paper presents a general approach to the evaluation of the complexity of classes of algorithms, so-called pVCD-method. To develop this method, all the examined families of models of empiric generalization were restricted to classes
implementable on computers and, wider, by examining their partially recursive representations. Within the framework of the
algorithmic approach, the concept of Kolmogorov’ complexity of algorithms for the recognition of properties or the extraction
of regularities is proposed. The method proposed to evaluate the nonrandomness of the extraction of empirical regularities
is based on this concept. 相似文献
18.
《Computers & Mathematics with Applications》2001,41(5-6):571-578
In this paper, we study the semicycles of oscillatory solutions of the delay difference equation yn+1 − yn + pnyn-k = 0, where pn is a sequence of nonnegative real numbers and k is a positive integer. Upper bound of numbers of terms of semicycles are determined in the case when Our results improve and complement known results in literature. 相似文献
19.
20.
Computer-aided analysis of autoradiographic films of DNA fragments is presented. The Powell least-squares procedure is used for optimization of parameters for components of complex densitometric curves. Since each densitometric spectrum may be divided for several non-overlapped blocks of bands, there is no upper limit on the number of parameters which must be optimized. Eight shapes for the component bands are utilized: symmetric and asymmetric Gauss and Cauchy functions, direct, symmetric and asymmetric product of Gauss function and inverse of Cauchy function, and log-normal function. The probability of DNA cleavage is calculated with correction for multiple cuts. The methods presented was applied to detailed analysis of densitometric spectra of a 21-bp DNA restriction fragment and allowed for direct correlation between structural microheterogeneity of DNA and the resulting cutting pattern. This method should facilitate the analysis of densitometric data from antibiotic-induced cleavage of DNA and footprinting experiments. 相似文献