共查询到20条相似文献,搜索用时 93 毫秒
1.
宋强 《单片机与嵌入式系统应用》2006,(6):36-38
阐述MTD2009J的特点及步进电机细分驱动的原理与方法,介绍在智能一体化球型摄像机中采用MTD2009J控制步进电机细分的具体实现方法及实际效果。 相似文献
2.
3.
4.
UC3717对二相步进电机的控制 总被引:2,自引:0,他引:2
该文介绍了UC3717对二相步进电机的控制方案,以及80C196KC如何实现对UC3717硬件电路的驱动,简单地介绍了控制二相步进电机运转的驱动程序。UC3717是一种用来驱动二相步进电机的专用芯片,它根据信号发生电路产生的信号和信号的频率,产生驱动二相步进电机的驱动信号,从而控制电机的运行。步进电机的运行状态有转动和锁定,控制其运行的程序为步进电机驱动程序,可以通过设定韧值达到控制电机运转的目的。 相似文献
5.
6.
基于FPGA的新型步进电机驱动系统 总被引:1,自引:0,他引:1
美国Allegro公司推出的A3972型串口控制器是步进电机微步距驱动专用电路.一个A3972外加一个CPU即可实现步进电机的微步距驱动,本文用VHDL语言对FPGA进行编程仿真,产生A3972芯片所需的驱动脉冲时序,达到对步进电机的控制,简化了步进电机控制的实现. 相似文献
7.
基于L297/L298芯片步进电机的单片机控制 总被引:11,自引:3,他引:11
在分析了步进电机驱动芯片L297/L298的性能、结构的基础上,结合AT89C52单片机,介绍实现驱动步进电机的一种简单方法.文中给出了控制原理图。实测表明,利用该方法设计的步进电机驱动系统具有硬件结构简单、软件编程容易和价格低廉的特点。 相似文献
8.
UDN2998W是美国AllegroMicrosystem公司生产的一种专门用于电机驱动的混合集成电路。UDN2998W是一种双重全桥电机驱动器,它可用于无刷直流电机或步进电机的驱动,其输出电流可达±2A(峰值电流可达±3A)。本文介绍了UDN2998W的一般性能及特点,并举例说明了它的基本用法。 相似文献
9.
步进电机的单片机控制 总被引:2,自引:0,他引:2
本文用MCS-51系列单片机对进步电机的启动,速度,方向,停止等进行控制,利用软件实现对进步电机驱动信号的环形分配,并获得了进步电机更入转矩,更小转角的控制方案。 相似文献
10.
本文介绍了一种的新型的步进电机控制系统,采用DSP作为控制器,构建步进电机的驱动系统,并在此基础上实现细分角度和电流的实时运算.利用其片内集成的事件管理模块通过软件实现脉宽调制.提高了系统控制性能,实现步进电机步距角的高精度、连续细分驱动.同时通过振动信号的分析对电机轴承进行故障诊断.综合利用了包络检波和对FFT频谱分析法,有效提高系统的实时性和测量精度,并实现了步进电机在运行中瞬时故障的实时监测和报警. 相似文献
11.
12.
对国网宁夏电力检修公司宁安运维站近2年来一次设备喷涂PRTV用量的统计数据进行分析整理,得出各类一次设备按照标准要求喷涂PRTV时的用量估算值,并针对现存作业中存在的问题,提出相应解决方案。 相似文献
13.
深圳市远望谷信息技术股份有限公司 《中国自动识别技术》2006,(1):55-56
针对国家烟草管理的现状,有关主管部门在全国推行“行业卷烟生产经营决策管理系统工程”,利用条码等自动识别技术手段实时掌握全国的生产经营信息。但某卷烟厂此前的物流环节已经是“件烟成垛”运输,如何在尽可能保持原有企业管理体系的前提下,达到有关部门的数据统计要求,解决成垛卷烟的物流和信息流的交互与统一问题成为技改的核心。该项目成功的将条码识别与射频识别有机结合起来,为烟草行业信息化提供了生动的应用案例。 相似文献
14.
机车空调逆变电源设计 总被引:1,自引:0,他引:1
本文讨论的是机车空调逆变电源系统的设计与研究。该电源系统主要是由DC/DC的BOOST升压部分和DC/AC三相逆变部分两部分组成。DC/DC部分所得直流电压通过DC/AC部分逆变成三相交流电,供给空调机组工作。同时,为使电源系统能更可靠的运行,也设计了相应的故障检测、保护等辅助电路。 相似文献
15.
16.
V. I. Donskoy 《Cybernetics and Systems Analysis》2012,48(2):233-241
The paper presents a general approach to the evaluation of the complexity of classes of algorithms, so-called pVCD-method. To develop this method, all the examined families of models of empiric generalization were restricted to classes
implementable on computers and, wider, by examining their partially recursive representations. Within the framework of the
algorithmic approach, the concept of Kolmogorov’ complexity of algorithms for the recognition of properties or the extraction
of regularities is proposed. The method proposed to evaluate the nonrandomness of the extraction of empirical regularities
is based on this concept. 相似文献
17.
Cybernetics and Systems Analysis - 相似文献
18.
《Computers & Mathematics with Applications》2001,41(5-6):571-578
In this paper, we study the semicycles of oscillatory solutions of the delay difference equation yn+1 − yn + pnyn-k = 0, where pn is a sequence of nonnegative real numbers and k is a positive integer. Upper bound of numbers of terms of semicycles are determined in the case when Our results improve and complement known results in literature. 相似文献
19.
20.
Computer-aided analysis of autoradiographic films of DNA fragments is presented. The Powell least-squares procedure is used for optimization of parameters for components of complex densitometric curves. Since each densitometric spectrum may be divided for several non-overlapped blocks of bands, there is no upper limit on the number of parameters which must be optimized. Eight shapes for the component bands are utilized: symmetric and asymmetric Gauss and Cauchy functions, direct, symmetric and asymmetric product of Gauss function and inverse of Cauchy function, and log-normal function. The probability of DNA cleavage is calculated with correction for multiple cuts. The methods presented was applied to detailed analysis of densitometric spectra of a 21-bp DNA restriction fragment and allowed for direct correlation between structural microheterogeneity of DNA and the resulting cutting pattern. This method should facilitate the analysis of densitometric data from antibiotic-induced cleavage of DNA and footprinting experiments. 相似文献