共查询到20条相似文献,搜索用时 140 毫秒
1.
砷化镓微波单片集成电路(MMIC)技术进展 总被引:1,自引:0,他引:1
着重讨论南京电子器件研究所(NEDI)在GaAs MMIC研制方面的近期进展。在详细介绍MMIC有源器件(MESFET,PHEMT及HBT)的CAD模型建立技术及MMIC CAD设计优化技术的基础上,以NEDI近年开发的各种MMIC为实例,包括发射,、接收与控制三类电路,给出有关的实验结果。此外,简要介绍了NEDI在移动通信手机用MMIC技术开发方面的前期结果。 相似文献
2.
以聚氨酯(PU)为组分I,乙烯工酯树脂(VER)为组分Ⅱ,采用二步法制备了聚氨酯/乙烯基酯树脂互穿聚合物网络(PU/VER-IPN)采用透射电镜(TEM)和原子显微镜观察了PU/VER-IPN的微观形态,用调制DSC(M-DSC^TM)动态力学分析方法(DMA)研究了IPN的玻璃化转变行为及动态力学性能,结果表明,PU网络与VER网络形成了多相微区结构,在界面处互穿和缠结,形成类似胞状的结构,PU 相似文献
3.
4.
用不附加另外电源的DC-PCVD装置沉积Si3N4薄膜,,XRD TEM检查出这种Si3N4是非晶态、IR,AES验证这种薄膜的主要成分是Si3N4、TEM与OM研究 薄膜组织结构。 相似文献
5.
聚氨酯/环氧树脂互穿网络聚合物相行为与粘接剪切性… 总被引:7,自引:0,他引:7
制备了一系列聚氨酯/环氧树脂互穿聚合物网络PU/EP IPNs,由DCS、TMA和DDV研究表明,IPNs在高温区存在单一的玻璃化转变温度,Tg,IPNs的相行为与其粘接剪切强度相关,并确认接枝共聚物的存在增强了IPNs的互穿效应。 相似文献
6.
聚氨酯/环氧树脂互穿网络聚合物相行为与粘接剪切性能的研究 总被引:6,自引:0,他引:6
制备了一系列聚氨酯/环氧树脂互穿聚合物网络PU/EPIPNs。由DSC、TMA和DDV研究表明,IPNs在高温区存在单一的玻璃化转变温度Tg,IPNs的相行为与其粘接剪切强度相关。并确认接枝共聚物的存在增强了IPNs的互穿效应 相似文献
7.
8.
聚醚型聚氨酯/乙烯基酯树脂互穿聚合物网络结构的研究 总被引:7,自引:0,他引:7
以聚氨酯(PU)为组分Ⅰ、乙烯基酯树脂(VER)为组分Ⅱ,采用二步法制备了聚氨酯/乙烯基酯树脂互穿聚合物网络(PU/VER-IPN),采用透射电镜(TEM)和原子力显微镜观察了PU/VER-IPN的微观形态,用调制DSC(M-DSCTM )、动态力学分析方法(DMA)研究了IPN 的玻璃化转变行为及动态力学性能。结果表明,PU 网络与VER网络形成了多相微区结构,在界面处互穿和缠结,形成类似胞状的结构,PU 相为胞壁,VER为胞体。在PU 和VER之间,次级作用明显加强,出现氢键吸收峰,并且出现宽温度阻尼范围。当PU/VER= 40/60 时,材料在宽温度范围的阻尼性能最好 相似文献
9.
本文阐述了北京第一机床厂在CIMS环境下,通过对零件特征的分析,提出了一种实用的描述产品零件的方法,在此基础上实现了回转体零件的CAD/CAPP/CAM集成系统的开发。重点论述了该系统的总体框架设计和主要功能:CAD特征定义及描述;基于商品CAD软件ICEMDDN之上的特征造型;应用通用专家智能系统开发工具,建立工艺知识模型及推理系统;经相应的后置处理实现NC程序的自动生成及以ORACLE。EDL 相似文献
10.
PU软段结构对PU/PMMA IPN中两组分相容性的影响 总被引:6,自引:0,他引:6
用同步法合成了4种聚氨酯/聚甲基两烯酸甲酯互穿聚合物网络/(PU/PMMA IPN)利用DDC、TEM和动态力学谱(DMS)等手段综合研究了IPN中两组分的相容性和相态结构,用基团贡献加和方法计算了各种PU和PMMA的溶度参数δ,结合PU软段链结构讨论了各种IPNK呈现不同相容性和相态结构的原因。 相似文献
11.
在传统的长基水声定位技术基础上,设计了一套集水声定位监测、无线电通信和水声遥控功能于一体的无线电遥控水声监测浮标系统,利用合作信标方式和询问应答方式对水下目标的三维运动轨迹进行测量,无线电通信和水声遥控功能相结合能实现对海底潜标的远程控制。系统设计中采用了一系列消除干扰、降低功耗的措施,提高了定位精度,延长了系统的工作时间。经水声拉距试验,到达7.8km处时,应答信号的时延值仍稳定;水声遥控指令在5.5km处时稳定可靠。在无线电拉距试验过程中,相距12km处通信质量良好。解算出的定位轨迹与目标船上的GPS轨迹基本一致,定位精度在5m左右。上述海上试验结果证明了系统的可行性和可靠性。 相似文献
12.
13.
基于Internet的包装机械远程故障诊断及维修专家系统的研究 总被引:1,自引:0,他引:1
针对包装机械提出一种基于Internet的远程故障诊断及维修专家系统,该系统既可用于现场诊断,也可以实现远程诊断,将机器的知识库和专家知识经验充分结合起来.并且重点介绍了系统架构和功能、Web服务器站点的实现方法、基于XML的数据集成方法,真正做到了资源共享,提高了效率,适应包装机械智能化的需要. 相似文献
14.
Optimal conceptual design synthesis is the very starting and key phase in the product design. Its result is the optimal alternative in the solution space, and will be further completed and improved into the final product design scheme in the next detailed design works. With the progress of the Internet technology, a large number of design resources actually construct an increasingly growing distributed resource environment. If these rich resources can be fully introduced into the optimal conceptual design synthesis, the design efficiency and product innovation will be promoted largely. Therefore, a computational approach was proposed for the optimal conceptual design synthesis based on the distributed resource environment. In this approach, the distributed resource environment is modelled as a set of numerous functional units (FUs), and the optimal conceptual design synthesis is concluded into a process of generating the optimal objective FU chain. Here, the main workload is completed by a proposed computer algorithm. To prove the feasibility of this approach, a computer programme called Optimal Conceptual Design Synthesis System (OCDSS) was established. A garbage-powered lighting system was designed with OCDSS as an illustration. 相似文献
15.
J. Macedo 《国际生产研究杂志》2013,51(17):3565-3588
A manufacturing system consists of a structure and distributed working procedures that include operating parameters. A new approach named unified structural–procedural approach (USPA) for designing the integrated structure and the distributed but integrated working procedures of a manufacturing system is included in this paper. The designed structure and working procedures bring about the efficiency desired by the target market on the ordered products even when the desired efficiency is turbulent. Here, the USPA approach is applied to redesign a real apparel factory. The USPA includes identification of the target market requirements, conception of the target manufacturing system, design of the system structure and working procedures. Conception of the target manufacturing system is done using pseudo-neural networks that exploit the improvements introduced by the higher performing firms throughout the industry. Design of the system structure is done using simulation models that bring forth building structural improvements whose implementation investments equate the saved inefficiency costs because the system structure is improved. The distributed working procedures are specified using flowcharts that include integrated values of the procedural parameters. The nature of these parameters are identified from available non-integrated operations management models and their integrated values obtained by using simulation models that evaluate their joint effect on product efficiency. 相似文献
16.
文章介绍了基于MSP430和GSM短消息的远程抄表系统的结构设计及具体实现方法,介绍了AT指令和软件设计思路。实践证明,系统工作稳定可靠,具有广阔的应用前景。 相似文献
17.
18.
19.
中小知识型企业的人力资源管理--基于职能型5P模式的分析 总被引:5,自引:1,他引:5
通过整合现代人力资源管理关键业务,提出了职能型5P管理模式。运用该模式,从岗位设计、员工开发、绩效管理、薪酬与奖励以及积极的文化等五个方面讨论了中小知识型企业的人力资源管理。最后,将该模式应用于企业中,以检验其有效性。 相似文献