Certification Institutions Expected to Update and Transfer Information on Present Standards

Standards are the basis for production enterprises to organize production, ex-factory inspection, trade (delivery) and technical exchanges, product certification, quality arbitration and supervision.……     

The Research of Anti-Wear Properties of Organomolybdenum Compounds in the Engine Oils

A four-ball tester was used to evaluate the anti-wear performance of three kinds of organomolybdemun compounds in the engine oils, i. e., molybdenum dialkyldithiophosphate (MoDDP), molybdenum dialkyldithiocarbamate ( MoDTC), and sulphur and phosphorus freeorganomolybdeum (Molybdate). The results indicate that a low concentration of MoDDP doesn' t improve the anti-wear properties of the commercial engine oils, but a high concentration of MoDDP can obviously improve the anti-wear properties and the load-carrying capacity of the engine oils. MoDTC doesn' t improve the antiwear properties of the engine oils, but worsens the anti-wear properties of the oils. Signifi can timprove ment of frictional and wear characteristics is obtained with Molybdate added in the commercial engine oils and the formulated oils.     

Optimum-Simulation von Ernteprozessen

Zusammenfassung Bei der Gestaltung von Ernteprozessen — beispielsweise des Prozesses Mähdrusch, Körnertransport und -abnahme — als transportverbundene Fließarbeitsverfahren mit mindestens zwei verschiedenen Arbeitsmitteln gibt es einen großen Optimierungsspielraum. Solche Prozesse sind mehrstufige Bedienungsprozesse mit gemischter Anordnung der Bedienungseinrichtungen. Außerdem besitzen sie stark ausgeprägte räumliche Aspekte. Es wird vor allem gezeigt, welche Merkmale solcher Prozesse in Simulationsmodellen abgebildet sein müssen, welche Zielgrößen in Abhängigkeit von welchen Einflußgrößen unter Berücksichtigung welcher Prozeßbedingungen ermittelt werden sollten und wie der Bewertungsprozeß zur Ermittlung der gewünschten Informationen gestaltet werden muß.     

Certification Becomes Important for the I Quality; and Safety Supervision of the Chinese Liquor Sector

The end of 2007, over 200 unit products of more than 80 Chinese firms have passed the quality grade certification for liquor products. These products involve distilled spirits, beer, wine, yellow wine, fruit syrup wine and others, and cover over 80% of the national top-branded liquor products.……     

Deposition and Coating Properties on CVD Tungsten

Surface characterization and microstructure studies are performed on chemical vapor deposited (CVD) tungsten coating. There is about 2 μm thickness diffusion layer of tungsten in the molybdenum substrate. The thermal shock test shows tungsten coating has good adhesion with molybdenum substrate, but the elements of oxygen and carbon in the tungsten coating have the bad affection to the adhesion. The result of high-temperature diffusion experiment is the diffusion rate from molybdenum substrate to tungsten coating is faster.     

Analysis of marine hydrobiont lipid extracts as possible cryoprotective agents

We studied a combined effect of the cryoprotectants both of lipid and carbohydrate origin at the presence of DMSO or without it on cell viability and the RNA synthesis in the embryonic mollusc and echinoderm cell cultures obtained at different developmental stages. Cryoprotective properties of exogenous lipids correlated with their thermotropic behavior. Lipid extracts from marine hydrobiontes, which thermal transitions are characterized by relatively small part of calorimetric thermogram area lying at temperatures above 0 °C (6–18%), were found to possess a considerable cryoprotective activity. The results are discussed in relation to the prediction of the cryoprotective activity of lipid extracts for marine animal cells. In addition, it was found that marine invertebrate cells can be cryopreserved without DMSO at the presence of trehalose and lipid extracts of some marine hydrobiontes.     

Low-Temperature Properties of Silver

Pure silver is used extensively in the preparation of high-temperature superconductor wires, tapes, films, and other configurations in which the silver not only shields the superconducting material from the surrounding materials, but also provides a degree of flexibility and strain relief, as well as stabilization and low-resistance electrical contact. Silver is relatively expensive, but at this stage of superconductor development, its unique combination of properties seems to offer the only reasonable means of achieving usable lengths of conductor. In this role, the low-temperature physical (electrical, thermal, magnetic, optical) and mechanical properties of the silver all become important. Here we present a collection of properties data extracted from the cryogenic literature and, to the extent possible, selected for reliability.     

Early ironwork in Biscay: Survey,excavation, experimentation and materials characterization. An integral study of the mountainside ironworks (ferrerías de monte or “haizeolak”)

ABSTRACT

The production of iron in Biscay (Basque Country, Spain) has been a hallmark of this territory of the North of the Iberian Peninsula throughout its history. The Archaeology team of the Basque Country Mining Museum has spent 13 years, so far, studying the origins of this activity through the evidences left at the old pre-hydraulic iron production workshops known as mountainside ironworks (ferrerías de monte) or haizeolak. It has catalogued 170 archaeometallurgical sites of this type in Biscay, and the archeological excavation of some of them has led to the knowledge of the different stages of the production process that took place in these workshops. The team has also experimentally reproduced the work carried out in a mountainside ironworks from the High Middle Ages, and it has currently started the characterization process of this type of activity through the study of the collected materials.     

Brainstorming for ISO Strategy 2016-2020

正Responding to ISO’s appeal for survey for the to-be-developed ISO Strategy Plan for 2016-2020,SAC hosted a special workshop over the needs and comments of various fi elds on June 8 in Beijing.The workshop was attended by ISO President-elect and Ansteel General Manager Zhang Xiaogang,SAC Vice-Administrator Yu Xinli,and 30 experts from     

CNAS Passes APLAC's PTP Review

正The review group of Asia Pacific Laboratory Accreditation Cooperation(APLAC)carried out a 4-day peer review of the proficiency testing provider(PTP)for China National Accreditation Service for Conformity Assessment(CNAS)from July 28 to 31,2014.CNAS passed the PTP review with excellent performance.Two senior peer reviewers of APLAC made a comprehensive,rigorous and detailed review of CNAS’s PTP accreditation activities,and made the on-spot inspection of the review groups in Shanghai and Shenzhen respectively.     

新闻(英文)

正China and Greece Sign the Standardization Cooperation Agreement Witnessed by Chinese Premier Li Keqiang and Greek Prime Minister Antonis Samaras,AQSIQ Minister Zhi Shuping and ELOT Chairman and Executive Director Angelos Tolkas signed the SAC-ELOT Standardization Cooperation Agreement.The Agreement is one of the critical cooperation documents signed during Li Keqiang’s visit in Greece,encouraging China and Greece to     

Win-Win Cooperation

正The Chinese Premier Li Keqiang's recent trip to the UK has reinforced the China-UK comprehensive strategic partnership;just as the British Prime Minister David Cameron put it,"the relationship is gaining in strength,depth and understanding"after a bucket of business deals being inked worth more than 30 billion US dollars.From the first agreement signing in 2004 to the new agreement of mutual standards recognition and adoption in     

Systematic Approach for Emerging Industry

正A national directory of standards complexes for strategic emerging sectors was recently developed and released jointly by 12governmental departments,namely,SAC,NDRC,MOST,MIIT,MEP,MOA,AQSIQ,State Forest Administration,State Administration of Science and Technology for National Defense,State Oceanic Administration and National Railway Administration.     

Strictest Pollutants Emission Standards

正Four new national standards on air pollutant emission control offi cially issued by the Ministry of Environment Protection(MEP)together with AQSIQ and SAC has been brought into force from July 1,2014.The Emission standard for air pollutants of coal-burning,oil-burning and gasfi red boilers,which is the strictest emission standard historically,will tackle the stubborn pollution problem of boilers and waste incineration in most of China’s regions.     

Instructions to Authors

New Carbon Materials is a bimonthly journal published with the permission of the Ministry of Science and Technology and of the State News and Publication Agency.The journal is sponsored by the Institute of Coal Chemistry,Chinese Academy of Sciences,and is published by Science Press.Aims and Scope     

Progress on Standards Copyright Protection

正Recently,National Copyright Administration of China(NCAC)has rewarded 215 organizations and 179 individuals for their outstanding efforts on investigating standards copyright infringement and piracy in 2013.Hua Jianhua,the Deputy-Director of National Standards Copyright Protection Workgroup Office won a third prize of the national individual award.In 2012,SAC set up the national standards copyright protection working group,and developed policies to crack down standards infringement and piracy behaviors and to strengthen standards copyright protection.     

Tian Shihong Meets Dr. Torsten Bahke,Chairman of the Executive Board of DIN

正Tian Shihong,the Administrator of SAC,met Dr.Torsten Bahke,the Chairman of the Executive Board of DIN in Beijing on September 3,2014.The two sides made an in-depth discussion of the following issues:the staff exchange and training,international standardization cooperation projects and ISO Strategic Plan(2016-2020),copyright of ISO publications,and principles for adopting international standards,reaching an agreement on advancing the cooperation with ISO and IEC,adopting the policy of international standards,enhancing standards quality as well as publicity and implementation of standards,etc.     

奥氏体不锈钢管母材和焊缝的显微组织对超声检测的影响

采用金相试验手段研究了在不同焊接方法下同种奥氏体不锈钢管母材及焊缝的显微组织特性,以及在相同焊接方法下奥氏体钢管和碳钢钢管母材及焊缝的显微组织特性。用超声检测方法对试样焊缝中的人工刻槽缺陷和边缘端角进行灵敏度和信噪比的定量检测,研究了超声波在奥氏体不锈钢管和碳钢钢管中的传播特性差异。结果表明:在两种不同的焊接方法下,奥氏体不锈钢管母材及焊缝的显微组织状态基本相同,对超声检测的影响差异不大;在相同的焊接方法下,304奥氏体不锈钢管和20碳钢钢管的焊缝显微组织明显不同,超声波在奥氏体不锈钢管焊缝内的传播效果较差,检测存在一定困难;临界纵波双晶探头的灵敏度和信噪比均很高,在检测表面缺陷时能获得较好的效果。     

Effect of Texture and Surface Chemistry of Palm Nut Hull Activated Carbon on the Adsorption of Pigments and Free Fatty Acids from Vegetable Oils

Activated carbons were produced from palm nut hull,which is a waste material of palm oil extraction industries.Activated carbons having various pore size distri...     

Mechanism Study on the Wear of CrAlTiN Coated High-Speed Steel Twist Drills Under Dry Cutting Conditions

As demands about environment protection are growing up, dry cutting technology is getting more and more concerns from all over the world. Main works performed here are study on dry cutting performances and wear mechanisms of M2high-speed steel (HSS) twist drills with CrAlTiN multicomponent coatings, which was deposited using magnetron sputter ion plating system, in drilling 45 and 30CrMnSiA steel, and their comparisons to those in drilling the same steel but using monolayer CrN and commercial TiN coated drills. Drilling performances of drills are evaluated mainly through the measurements of width on outer corner flank land and the cutting forces. Results show that performances of CrAlTiN coated drills are better than those of monolayer CrN and TiN coated drills. In drilling 45 and 30CrMnSiA steel, the average tool life of the CrAlTiN coated drills are 17.2 and 11.8 times higher than those of the uncoated drills. Observing wear of the drill with scanning electronic microscope, results show that there is no crack or spallation of the CrAlTiN coatings in wear zones. Main mechanism of the wear here is adhesion.