深过冷条件下Ni－Sn合金的伪共生区与形核特点

本文采用无机盐溶剂中高温循环过热和真空下单辊快淬两种方法获得Ｎｉ－Ｓｎ合金的深过冷，从而测得了Ｎｉ－Ｓｎ合金的伪共生区，分析表明：深过冷条件下共晶两相的形核是彼此独立的异质形核；尽管Ｎｉ３Ｓｎ是易于形核的相，但合金中的固有杂质有利于Ｎｉ（α）相形核．     

深过冷条件下Ni—Sn合金的伪共生区与形核特点

本文采用无机盐溶剂中高温循环过热和真空下单辊快淬两种方法获得Ｎｉ－Ｓｎ合金的深过冷，从而测得了Ｎｉ－Ｓｎ合金的伪共生区。分析表明：深过冷条件下共晶两相的形核是彼此独立的异质形核；尽管Ｎｉ３Ｓｎ是易于形核的相，但合金中的固有杂质有利于Ｎｉ（α）相形核。     

Ge73.7Ni26.3合金的原子团簇触发凝固

研究了过冷Ｇｅ７３．７Ｎｉ２６．３合金熔的Ｎｉ,Ｃｕ,Ｓｉ原子团簇触发凝固,发现触 发凝固起始温度显著高于未经触发凝固起始温度,并探讨了原子团族诱发引起的形核过程。     

液态Ni－Fe合金的超过冷与热力学性质

采用熔融玻璃净化法使液态Ｎｉ－１０％Ｆｅ和Ｎｉ－３５％Ｆｅ合金过冷度分别达到３７１（０．９０△Ｔ＿ｈ）和３４３Ｋ（０．９１△Ｔ＿ｈ）．实验测得其超过冷临界过冷度△Ｔｈ分别为４１３和３７６Ｋ．根据超过冷的定义导出一种测定深过冷熔体平均比热容的方法，从而得到两种深过冷合金的比热容为４１．０和４０．７Ｊ／（ｍｏｌ·Ｋ）．据此对快速凝固过程中的焓变△Ｈ＿（ＬＳ），熵变△Ｓ＿（ＬＳ），相变驱动力△Ｇ＿（ＬＳ）以及晶体形核率Ⅰ进行了理论计算．发现尽管过冷度超过了０．２Ｔ＿Ｌ，液态合金仍然发生异质形核．     

玻璃净化剂组分对Cu50Ni50合金熔体过冷度稳定性的影响

在高真空下,研究了净化剂Ｂ２Ｏ３,８９％ＳｉＯ２＋１２．５％Ｂ２Ｏ３＋２．２％Ａｌ２Ｏ３＋０．６％ＣａＯ＋５．７％Ｎａ２Ｏ（简写为Ｎａ－Ｃａ－Ａｌ－Ｂ－Ｓｉ）和５０％Ｎａ－Ｃａ－Ａｌ－Ｂ－Ｓｉ＋５０％ｎａ２Ｂ８Ｏ４对Ｃｕ５０Ｎｉ５０ｘ合金溶体在循环过热过程中的过冷度及其稳定Ｃａ－Ａｌ－Ｂ－Ｓｉ玻璃的净化过程为物理－化学复合净化,但由于该净化剂粘度大,在循环过热的冷却过程中因发生合金溶体与净化剂分离     

玻璃组分与Cu—Ni熔体过冷稳定性

在高真空下,研究了５０ ％ （７９ ％ Ｓｉ Ｏ２ ＋ １２ ．５ ％ Ｂ２ Ｏ３ ＋ ２ ．２ ％ Ａｌ２ Ｏ３ ＋ ０ ．６ ％ Ｃａ Ｏ ＋ ５ ．７ ％ Ｎａ２ Ｏ） （ 简写为 Ｎａ Ｃａ Ａｌ Ｂ Ｓｉ） ＋ ５０ ％ （ Ｎａ２ Ｂ７ Ｏ４） 对 Ｃｕ５０ Ｎｉ５０ 和 Ｃｕ７０ Ｎｉ３０ 合金熔体循环过热过程中过冷度稳定性的影响。结果表明,５０ ％（ Ｎａ Ｃａ Ａｌ Ｂ Ｓｉ） ＋ ５０ ％ （ Ｎａ２ Ｂ７ Ｏ４） 玻璃对合金熔体的净化过程为物理—化学复合净化, 且在（ Ｎａ Ｃａ Ａｌ Ｂ Ｓｉ） 净化剂中加入（ Ｎａ２ Ｂ７ Ｏ４） 玻璃形成的净化剂粘度适中,因此合金熔体在２ ～５ 次循环过热过程中可以获得稳定深过冷。     

液态金属快速结晶的热力学驱动力

采用超高真空无容器悬浮熔炼技术使液态Ｆｅ和Ｎｉ的过冷度分别达２００和２３５Ｋ，借助量热法测定出其比热各为４８．６和４０．５Ｊ·ｍｏｌ~（－１）·Ｋ~（－１）．据此精确计算出深过冷Ｆｅ和Ｎｉ快速结晶的热力学驱动力△Ｇ_（ＬＳ），并与Ｔｕｒｎｂｕｌｌ模型和Ｄｕｂｅｙ－Ｒａｍａｃｈａｎｄｒａｒａｏ模型的近似计算结果相比较，发现这两种近似模型在过冷度超过１００Ｋ时均产生大于１％的偏差．进一步分析发现，△Ｇ_（ＬＳ）的计算偏差对深过冷液态金属中晶体形核率的影响极大，因此快速凝固研究中应尽可能精确计算△Ｇ_（ＬＳ）．     

六方材料织构的近真ODF分析系统

采用熔融玻璃自分离净化工艺，可使液态（Ｎｉ０．５３Ｆｅ０．３３Ｃｏ０．１４）７３Ｂ１７Ｓｉ８Ｎｂ２合金稳定地获得０．３Ｔ１以上的过冷度。研究了电磁场在深过冷液态合金凝固过程中所起的作用。观察及分析结果表明，电磁场对于过冷度的影响甚微，但却对于形核及其生长产生明确的影响，使形核及生长表现出与自由凝固下完全不同的规律。电磁场对于进一步提高深过冷合金的热力学过冷度具有促进作用。     

Si在变形Ni—Cu—Fe—Mn—Si合金中的行为

研究了热处理后前后变形Ｎｉ－Ｃｕ－Ｆｅ－Ｍｎ－Ｓｉ合金中的Ｓｉ的存在形式，在晶界及晶内的分布状态和结构，并研究了在热处理状态下，合金性能的变化，ＸＲＤ分析表明：Ｎｉ－Ｃｕ－Ｆｅ－Ｍｎ－Ｓｉ合金基体为面心方立结构，在热加工状态（Ｒ态）下，Ｎｉ－Ｃｕ－Ｆｅ－Ｍｎ－Ｓｉ合金除Ｎｉ３Ｓｉ相外，还出现了Ｎｉ３１Ｓｉ１２相。该相为立方结构。ＴＥＭ分析表明：第二相（Ｎｉ３Ｓｉ）在晶界和晶内弥散分布，少量在晶界聚     

Ti—Ni—Si纳米合金的制备和特性

Ｔｉ７０Ｎｉ２０Ｓｉ１０非晶合金在５００－８００℃范围内经１ｈ退火后，可形成平均晶粒度为８－１２０ｎｍ的纳米合金，Ｘ射线衍射（ＸＲＤ）和透射电镜（ＴＥＭ）的结果表明，不同平均晶粒度的纳米合金样品中，相的组成相同，即Ｔｉ２Ｎｉ和Ｔｉ５Ｓｉ３以及少量的α－Ｔｉ晶体相，显微硬度（ＨＶ）的测量表明，纳米合金样品的显微硬度值比铸态或非晶态样品高一倍左右。但是，随着平均晶粒度的减小，硬度值的变化并不满足线性的     

Effects of Post-weld Heat Treatment on Microstructure,Mechanical Properties and the Role of Weld Reinforcement in 2219 Aluminum Alloy TIG-Welded Joints

In as-welded state, each region of 2219 aluminum alloy TIG-welded joint shows diff erent microstructure and microhardness due to the diff erent welding heat cycles and the resulting evolution of second phases. After the post-weld heat treatment, both the amount and the size of the eutectic structure or θ phases decreased. Correspondingly, both the Cu content in α-Al matrix and the microhardness increased to a similar level in each region of the joint, and the tensile strength of the entire joint was greatly improved. Post-weld heat treatment played the role of solid solution strengthening and aging strengthening. After the post-weld heat treatment, the weld performance became similar to other regions, but weld reinforcements lost their reinforcing eff ect on the weld and their existence was more of an adverse eff ect. The joint without weld reinforcements after the post-weld heat treatment had the optimal tensile properties, and the specimens randomly crack in the weld zone.     

The First Phase of the SRIF Industrialized Base in ＂West Area＂ Has Been Put into Operation

After nearly two years＇ tense construction, the first phase of industrialized base of Shenyang Research Institute of Foundry （SRIF）, located at the Tiexi Casting and Forging Industrial Park in the west of Tiexi District, has now been completed and formally put into operation.     

新型的治疗阿尔茨海默氏症药物(1-二甲基磷酰基-2,2,2-三氯)-乙基-1-醇烟酸醋对体外神经细胞的作用

目的: 观察本实验室合成的一种治疗阿尔茨海默氏症(AD)的药物(1-二甲基磷酰基-2, 2, 2 -三氯)-乙基^-1-醇烟酸醋(NMF),对体外培养的皮层神经细胞活性的影响以及对海人藻酸(KA)所致的神经损伤的保护作用。方法: 采用体外培养皮层神经元的方法,解剖分离 15 d胚胎小鼠皮层神经细胞, 接种于 96孔板,48 h 后加药并培养 72 h,以 MIT 法 观察 NMF 对小鼠皮层神经细胞活性的影响;同时将接种于 24 孔板的细胞预先给予 NMF,d 3 时加或不加KA处理后,以台盼蓝染色鉴别并计数死、活细胞,可得出细胞的存活率。结果: NMF 明显促进胎鼠皮层神经元活性,其中 NMF1、0. 1、10nmol·L^-1促进神经元活性增殖率分别高达 34.7%、37.4%、36. 7%, NMF 明显促进正常胎鼠皮层神经元存活卒,与对照组比较,10nmol·L^-1 NMF 对皮层神经元的存活率分别提高 39.3%、73.5%。 NMF能显著 对抗 KA 所致的神经元损伤,与 KA 损伤组相比, NMF0.1、10、10nmol·L^-1对损伤皮层神经元的保护率分别为 77.30%、80.10%、84.15%。结论: NMF 明 显促进胎鼠皮层神经元的洁性、提高正常皮层神经元,的存活卒,并能有效地保护KA所致的神经元损伤,提示 NMF 是一种很有潜力的治疗 AD 的药物。     

Theoretical Analysis for the Motion and Temperature of Melt Droplets in Spray Degassing Process

The motion of melt droplets in spray degassing process was analyzed theoretically. The height of the treatment tank in spray degassing process could be determined by the results of theoretical calculation of motion of melt droplets. To know whether the melt droplets would solidify during spraying process, the balance temperature of melt droplets was also theoretically analyzed. Then proof experiments for theoretical results about temperature of melt droplets were carried. In comparison, the experimental results were nearly similar to the calculation results.     

Growth Kinetics of Single Inclusion Particle in Molten Melts

On the basis of the single-particle framework, a new theory on inclusion growth in metallurgical melts is developed to study the kinetics of inclusion growth on account of reaction and collision. The studies show that the early growth of inclusion depends on reaction growth and Brawnian motion collision, and where the former is decisive, the late growth depends on turbulence collision and Stokes＇ collision, and where the former is dominant; collision growth is very quick during the smelting process, lessened in the refining process, but nearly negligible in the continuous casting process.     

An Easy Way to Quantify the Adhesion Energy of Nanostructured Cu/X(X=Cr,Ta,Mo,Nb,Zr) Multilayer Films Adherent to Polyimide Substrates

An approach based on film buckling under simple uniaxial tensile testing was utilized in this paper to quantitatively estimate the interfacial energy of the nanostructured multilayer films(NMFs) adherent to flexible substrates. The interfacial energies of polyimide-supported NMFs are determined to be *5.0 J/m2 for Cu/Cr, *4.1 J/m2 for Cu/Ta,*2.8 J/m2 for Cu/Mo, *1.1 J/m2 for Cu/Nb, and *1.2 J/m2 for Cu/Zr NMFs. Furthermore, a linear relationship between the adhesion energy and the interfacial shear strength is clearly demonstrated for the Cu-based NMFs, which is highly indicative of the applicability and reliability of the modified models.     

High-Speed Friction Stir Welding of SiC_p/Al–Mg–Si–Cu Composite

A 17 vol% SiCp/Al–Mg–Si–Cu composite plate with a thickness of 3 mm was successfully friction stir welded(FSWed) at a very high welding speed of 2000 mm/min for the first time. Microstructural observation indicated that the coarsening of the precipitates was greatly inhibited in the heat-affected zone of the FSW joint at high welding speed, due to the significantly reduced peak temperature and duration at high temperature. Therefore, prominent enhancement of the hardness was achieved at the lowest hardness zone of the FSW joint at this high welding speed, which was similar to that of the nugget zone. Furthermore, the ultimate tensile strength of the joint was as high as 369 MPa, which was much higher than that obtained at low welding speed of 100 mm/min(298 MPa). This study provides an effective method to weld aluminum matrix composite with superior quality and high welding efficiency.     

Three-Dimensional Growth of Coherent Ferrite in Austenite: A Molecular Dynamics Study

Coherent second phase often exhibits anisotropic morphology with specifi c orientations with respect to both the second and the matrix phases. As a key feature of microstructure, the morphology of the coherent particles is essential for understanding the second-phase strengthening eff ect in various industrial alloys. This letter reports anisotropic growth of coherent ferrite from austenite matrix in pure iron based on molecular dynamics simulation. We found that the ferrite grain tends to grow into an elongated plate-like shape, independent of its initial confi guration. The fi nal shape of the ferrite is closely related to the misfi t between the two phases, with the longest direction and the broad facet of the plate being, respectively, consistent with the best matching direction and the best matching plane calculated via the Burgers vector content(BVC) method. The strain energy calculation in the framework of Eshelby's inclusion theory verifi es that the simulated orientation of the coherent ferrite is energetically favorable. It is anticipated that the BVC method will be applicable in analysis of anisotropic growth and morphology of coherent second phase in other phase transformation systems.     

A STUDY OF TEMPERATURE-DEPENDENT VALENCE BOND STRUCTURE OF TITANIUM

On the basis of energy and shape method for the determination of the valence bond (VB) structures of crystal, the valence bond structure of titanium is redetermined at room temperature and calculated in the whole temperature range of 0-1943K. The outer shell electronic distribution of Ti is e_c~(2.9907) · (s_c~(0.4980) d_c~(2.4927)) ef1.0093 in crystal. The temperature dependences of the VB structures of hcp and bcc phases are the same. The VB structures of hcp and bcc phases monotonically increase or decrease with the increase in temperature, but show discontinuous changes at the phase-transformation temperature 1155K.     

Structural Optimization of Electromagnetic Swirling Flow in Nozzle of Slab Continuous Casting

During the slab continuous casting process, the flow field of molten steel in the mold plays a decisive role in the quality of the slab. In this paper, electromagnetic swirling flow in nozzle technology is proposed to control the flow field in mold.This technology can drive molten steel to rotate inside the submerged entry nozzle by electromagnetic force, thereby controlling the flow field. This research shows that it can reduce the impact of molten steel on the bottom of nozzle and partly reduce the negative pressure at the upper part of nozzle outlet which is even eliminated by optimizing the structure and angle of nozzle. The area of heat flux of the mold wall becomes larger, and the crest value of heat flux gets lower than that without swirling in nozzle and any nozzle optimization. The meniscus fluctuates smoothly, and the flow velocity at the top surface is within a reasonable range. The temperature field distribution in the mold is uniform which was beneficial to the growth of equiaxed crystal and decreased element segregation.