共查询到18条相似文献,搜索用时 93 毫秒
1.
为了解决氨制冷压力管道不停机、不拆保冷层、不排介质就无法实施全面检验的问题,提出了运用X射线数字成像技术和红外热成像技术对氨制冷压力管道实施不停机全面检验方法,并利用试件对检验难点:液氨管道焊缝的无损检测、保冷管道的腐蚀检测及焊缝的咬边、错边检查等项目进行了模拟检测试验。用此方法对氨制冷压力管道进行现场检测,并取样进行对比验证,证明此项技术应用于氨制冷压力管道的不停机全面检验是可行的。 相似文献
2.
3.
氨制冷系统中压力管道是特种设备安全监管的核心,管道的焊接接头质量将直接影响整个氨制冷系统的运行安全。对氨制冷压力管道焊接接头进行缺陷及显微组织检测,分析焊接缺陷产生的原因以及对氨制冷管道服役安全造成的危害,并提出提高氨制冷管道焊接质量的建议。 相似文献
4.
5.
氨压机吸气管道的改造南充炼油厂华洪基氨压机吸气管道压力降的大小对氨制冷系统的制冷效率影响非常敏感,在蒸发压力一定的条件下,压降越大,氨压机吸入压力就越低,制冷机的效率也就越低。所以在工程设计中氨制冷系统吸气管道压力降通常控制在相当于饱和蒸发温度差0.... 相似文献
6.
7.
从选择材料、焊接品质和安装品质的控制这3个方面,分析了目前压力管道安装品质控制的现状,提出通过加强监督管理、做好最终检验、加强培训管理、制定奖惩机制等措施,提高压力管道安装品质。 相似文献
8.
9.
10.
11.
12.
13.
14.
A risk-based inspection system and a piping inspection guideline model were developed in this study. The research procedure consists of two parts--the building of a risk-based inspection model for piping and the construction of a risk-based piping inspection guideline model. Field visits at the plant were conducted to develop the risk-based inspection and strategic analysis system. A knowledge-based model had been built in accordance with international standards and local government regulations, and the rational unified process was applied for reducing the discrepancy in the development of the models. The models had been designed to analyze damage factors, damage models, and potential damage positions of piping in the petrochemical plants. The purpose of this study was to provide inspection-related personnel with the optimal planning tools for piping inspections, hence, to enable effective predictions of potential piping risks and to enhance the better degree of safety in plant operations that the petrochemical industries can be expected to achieve. A risk analysis was conducted on the piping system of a petrochemical plant. The outcome indicated that most of the risks resulted from a small number of pipelines. 相似文献
15.
X射线数字成像检测与诊断技术是X射线检测的发展趋势,微型X射线数字成像系统采用X射线敏感CCD面阵探测器作为射线探测元件,具有体积小、分辨率高、实时性好的特点。本文研制了基于X射线敏感CCD的微型X射线数字成像系统,介绍了整个系统的组成,阐述了X射线敏感CCD的工作原理,选定了系统采用的X射线敏感CCD,设计了CCD探测器的驱动电路、模数转化电路、数据采集与通讯电路、图像获取及处理软件等。该系统采用USB2.0接口与计算机进行通讯,直接采用USB接口电源供电,无需外部电源,结构简单。分辨率测试表明,该系统的分辨率>10lp/mm。 相似文献
16.
介绍了一种基于机器视觉技术塑料透明口服液检测系统中的成像装置,针对口服液包装过程中存在的问题,分别对获取泣位检测图像、杂质检测图像和瓶身变形检测图像的过程进行了讨论,并在试验的基础上设计了整个成像装置.实验结果表明,通过该装置获取的图像能够满足后续图像处理的要求. 相似文献
17.
讨论了增压吸收的氨水吸收式制冷系统中间压力与系统热力系数的关系,给出了不同蒸发温度下热力系数与中间压力的关系曲线;通过与单级氨水吸收式制冷系统的比较,得出了可以以罗茨鼓风机作为增压器的结论。 相似文献