The effects of achromatic and chromatic color schemes on participants' task performance in and appraisals of an office environment

This study explores the effects of chroma on participants' performance and environmental appraisal of an office. The research was conducted in a full‐scale experimental room designed as a private office where achromatic and chromatic color schemes with coequal values were applied. Sixty participants were assigned tasks and given a questionnaire to appraise the spatial color schemes. The findings show that chroma significantly affects performance and space appraisal. In terms of accuracy and time spent performance scores measured significantly better in the room with the chromatic scheme than those in the room with the achromatic scheme. The office with the chromatic scheme was found to be more pleasant, attractive, satisfying and dynamic than the one with the achromatic scheme, whereas the achromatic scheme was thought to be more formal and harmonious. Categorization of pleasantness, harmony, dynamism and spaciousness by factor analysis also showed differences between the achromatic and chromatic schemes. © 2011 Wiley Periodicals, Inc. Col Res Appl, 2012     

Fatty acid profiles and fat contents of commercially important seawater and freshwater fish species of Turkey: A comparative study

The fat content and fatty acid compositions of edible muscle of commercially important seawater and freshwater fish species were investigated. The fatty acid compositions of seawater fish species were found to be 25.5–39.4% saturated (SFA), 13.2–29.0% monounsaturated (MUFAs) and 25.2–48.2% polyunsaturated acids (PUFAs), whereas the fatty acid compositions of freshwater fish from Lake Seyhan consisted of 28.0–34.6% saturated (SFA), 10.7–22.7% monounsaturated (MUFAs) and 23.2–43.7% polyunsaturated acids (PUFAs). The proportions of n3 PUFAs of seawater fish (ranging from 22.6 for waker to 44.2% for blue fish) were higher than those of n3 PUFAs of freshwater fish (ranging from 11.5% for North African catfish to 28.4% for zander). However, the levels of n6 PUFAs of seawater fish (ranging from 0.43% for blue fish to 14.4% for sea bass) were lower than those of n6 PUFAs of freshwater fish (ranging from 5.27% for kutum to 16.8% for tench). The results showed that fatty acid profiles of most freshwater fish are basically comparable to those of seawater fish as sources of PUFAs.     

Heat transfer enhancement in a tube using circular cross sectional rings separated from wall

A numerical study was undertaken for investigating the heat transfer enhancement in a tube with the circular cross sectional rings. The rings were inserted near the tube wall. Five different spacings between the rings were considered as p = d/2, p = d, p = 3d/2, p = 2d and p = 3d. Uniform heat flux was applied to the external surface of the tube and air was selected as working fluid. Numerical calculations were performed with FLUENT 6.1.22 code, in the range of Reynolds number 4475–43725. The results obtained from a smooth tube were compared with those from the studies in literature in order to validate the numerical method. Consequently, the variation of Nusselt number, friction factor and overall enhancement ratios for the tube with rings were presented and the best overall enhancement of 18% was achieved for Re = 15,600 for which the spacing between the rings is 3d.     

Effects of the aluminum filler content on moisture diffusion into epoxy adhesives in distilled water and sea water

Epoxies are the most common of high‐performance structural adhesives, especially in automotive and aircraft manufacturing. In a variety of industrial applications, epoxy adhesives are required to have enhanced thermal conductivity. The normal method of changing this property is to add to the epoxy a filler of higher conductivity than the continuous phase. Although the improvement in the thermal properties of adhesives by the addition of metal fillers is obvious, their influence on water sorption characteristics of adhesives is not clear. It was the objective of this study to shed light on these aspects, which are lacking in the literature. The emphasis was placed on determining the moisture sorption behavior of aluminum‐powder‐filled epoxy adhesives under complete immersion in distilled water and sea water. Moisture diffusion tests show that the addition of aluminum filler into epoxy decreases the total amount of water intake at saturation in both fluids. However, there appears to be no significant effect of the aluminum filler content on the moisture diffusivity in epoxy adhesive specimens in either distilled water or seawater. It has also been determined that the adhesives adsorb a larger amount of water upon exposure to distilled water than when exposed to seawater, whereas the moisture diffusion rate in the adhesive immersed in seawater is higher than that in distilled water. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1165–1171, 2005     

Analyses of acoustic emission response of a fault breccia in uniaxial deformation

Interpretation of mechanical tests on block-in-matrix rocks (bimrocks) is difficult and often open to dispute as, with deformation, the interactions between blocks, matrix and pores are complex, reflecting the influence of their different shape, size, strength and stiffness. The acoustic emission (AE) technique can be used to record an ultrasound pulse emitted by a defect within the sample at the moment of its occurrence. Typically several deformations occur, such as crack closure, crack initiation or permanent crack damage, but they may be difficult to visualize with a fault breccia. Consequently, with fault breccia it is advisable to focus on the primary stage of deformation where the acoustic emission response may be traced to properties of the breccia, such as block proportions. The paper shows that the different geometrical properties, particularly the volumetric block proportions, are reflected by stress concentrations which in turn trigger specific AE signatures.     

Surface Characterization of Mild Steel During Atmospheric Corrosion After Being Treated by Sodium Dihydrogen Orthophosphate

Protection of Metals and Physical Chemistry of Surfaces - The objective of this study was to characterize the surfaces of the steel products produced locally during their exposure to the industrial...     

Preparation and thermal properties of polyethylene terephthalate/huntite–hydromagnesite composites

In this report, it was aimed to the improve thermal stability of polyethylene terephthalate (PET) by adding huntite/hydromagnesite minerale. PET/huntite/hydromagnesite composites were prepared by adding various proportions of huntite/hydromagnesite to PET. The chemical structures of the composites were characterized by Fourier transform infrared spectroscopy (FTIR) and X‐ray diffraction (XRD) analysis. Thermal properties of the composites were determined by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Glass‐transition temperatures and char yields increased with the increase of the huntite/hydromagnesite content in the composites. The surface morphologies of the composites were investigated by a scanning electron microscopy. The obtained results proved that the composite system is more thermally stable than the pure PET itself. POLYM. COMPOS., 37:3275–3279, 2016. © 2015 Society of Plastics Engineers     

Antibacterial oil‐based polyurethane films for wound dressing applications

As an alternative to petroleum‐based polyol, hydroxyl containing material was prepared from linseed oil for polyurethane synthesis. Hexamethylene di‐isocyanate (HMDI) and/or 4, 4′‐methylene diphenyl di‐isocyanate (MDI) were used as isocyanate source. The polymerization reaction was carried out without catalyst. Polymer films were prepared by casting‐evaporation technique. The MDI/HMDI‐based polyurethane and its films had higher T_g and better thermal property than that of the HMDI‐based one because of the existence of benzene ring in the polymer chain. Static water contact angle was determined to be 74° and 77.5° for HMDI and MDI/HMDI‐based films, respectively. Water adsorption was found to be around 2.6–3.6% for both films. In vitro degradation of polyurethanes in phosphate buffered saline at 37°C was investigated by gravimetric method. Fourier transform infrared spectroscopy and scanning electron microscopy were used for confirmation of degradation on the polymer surface. The degradation rate of the HMDI‐based polyurethane film was found higher than that of the MDI/HMDI‐based film. Both the direct contact method and the MMT test were applied for determination of cytotoxicity of polymer films, and the polyurethane films investigated here was not cytotoxic. Silver‐containing films were prepared using Biocera A® as filler and were screened for their antibacterial performance against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and/or Bacillus subtilis. The films prepared with and without Biocera A® exhibited antibacterial activity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010