Point Defects in Pb-, Bi-, and In-Doped CdZnTe Detectors: Deep-Level Transient Spectroscopy (DLTS) Measurements

We studied, by current deep-level transient spectroscopy (I-DLTS), point defects induced in CdZnTe detectors by three dopants: Pb, Bi, and In. Pb-doped CdZnTe detectors have a new acceptor trap at around 0.48?eV. The absence of a V_Cd trap suggests that all Cd vacancies are compensated by Pb interstitials after they form a deep-acceptor complex [[Pb_Cd]⁺-V _Cd ^2? ]^?. Bi-doped CdZnTe detectors had two distinct traps: a shallow trap at around 36?meV and a deep donor trap at around 0.82?eV. In detectors doped with In, we noted three well-known traps: two acceptor levels at around 0.18?eV (A-centers) and 0.31?eV (V_Cd), and a deep trap at around 1.1?eV.     

Continuous Control of Charge Transport in Bi‐Deficient BiFeO3 Films Through Local Ferroelectric Switching

It is demonstrated that electric transport in Bi‐deficient Bi_1‐δFeO₃ ferroelectric thin films, which act as a p‐type semiconductor, can be continuously and reversibly controlled by manipulating ferroelectric domains. Ferroelectric domain configuration is modified by applying a weak voltage stress to Pt/Bi_1‐δFeO₃/SrRuO₃ thin‐film capacitors. This results in diode behavior in macroscopic charge‐transport properties as well as shrinkage of polarization‐voltage hysteresis loops. The forward current density depends on the voltage stress time controlling the domain configuration in the Bi_1‐δFeO₃ film. Piezoresponse force microscopy shows that the density of head‐to‐head/tail‐to‐tail unpenetrating local domains created by the voltage stress is directly related to the continuous modification of the charge transport and the diode effect. The control of charge transport is discussed in conjunction with polarization‐dependent interfacial barriers and charge trapping at the non‐neutral domain walls of unpenetrating tail‐to‐tail domains. Because domain walls in Bi_1‐δFeO₃ act as local conducting paths for charge transport, the domain‐wall‐mediated charge transport can be extended to ferroelectric resistive nonvolatile memories and nanochannel field‐effect transistors with high performances conceptually.     

Effects of Er:YAG laser on bond strength of self‐etching adhesives to caries‐affected dentin

The erbium:yttrium–aluminum–garnet (Er:YAG) laser may be effective the bond strength of adhesive systems on dentine surfaces, the chemical composition and aggressiveness of adhesive systems in clinical practice. The purpose of this study was to evaluate the effects of the Er:YAG laser system with the bonding ability of two different self‐etching adhesives to caries‐affected dentine in primary molars. Ninety mid‐coronal flat dentine surfaces obtained from sound and caries‐affected human primary dentine were treated with an Er:YAG laser or a bur. The prepared surfaces were restored with an adhesive system (Xeno V; Clearfil S³) and a compomer (Dyract Extra). The restored teeth were sectioned with a low‐speed saw and 162 samples were obtained. The bond strength of the adhesive systems was tested using the micro‐tensile test method. The data were statistically analyzed. A restored tooth in each group was processed for scanning electron microscopy evaluation. The values of the highest bond strength were obtained from the Clearfil S³‐Er:YAG laser‐sound dentine group in all groups. (24.57 ± 7.27 MPa) (P > 0.05). The values of the lowest bond strength were obtained from the Xeno V‐Er:YAG laser‐sound dentine group in all groups (11.01 ± 3.89 MPa). It was determined that the Clearfil S³ increased the bond strength on the surface applied with Er:YAG laser according to the Xeno V. Microsc. Res. Tech. 77:282–288, 2014. © 2014 Wiley Periodicals, Inc.     

Carbon contamination analysis and its effect on extreme ultra violet mask imaging performance using coherent scattering microscopy/in-situ accelerated contamination system

The coherent scattering microscopy/in-situ accelerated contamination system (CSM/ICS) is a developmental metrology tool designed to analyze the impact of carbon contamination on the imaging performance. It was installed at 11B EUVL beam-line of the Pohang Accelerator Laboratory (PAL). Monochromatized 13.5 nm wavelength beam with Mo/Si multilayer mirrors and zirconium filters was used. The CSM/ICS is composed of the CSM for measuring imaging properties and the ICS for implementing acceleration of carbon contamination. The CSM has been proposed as an actinic inspection technique that records the coherent diffraction pattern from the EUV mask and reconstructs its aerial image using a phase retrieval algorithm. To improve the CSM measurement accuracy, optical and electrical noises of main chamber were minimized. The background noise level measured by CCD camera was approximately 8.5 counts (3 sigma) when the EUV beam was off. Actinic CD measurement repeatability was <1 A (3 sigma) at 17.5 nm line and space pattern. The influence of carbon contamination on the imaging properties can be analyzed by transferring EUV mask to CSM imaging center position after executing carbon contamination without a fine alignment system. We also installed photodiode and ellipsometry for in-situ reflectivity and thickness measurement. This paper describes optical design and system performance observed during the first phase of integration, including CSM imaging performance and carbon contamination analysis results.     

Study of effect of binders and loading pressures on the performance of the time delay pyrotechnic compositions

ABSTRACT

An experimental investigation was carried out to determine the effect of binders and loading pressures on burning performance of B/BaCrO₄ and Si/PbO/Pb₃O₄ delay compositions. The consolidated density and percent theoretical maximum density (%TMD) of these compositions were also studied with different binders and at multiple loading pressures. Carboxyl methyl cellulose (CMC), dextrin, and fish glue with varying wt. % were used as binders. It was observed that the burning rate of these delay compositions was inversely proportional to the binder content. The burning rate of B/BaCrO₄ delay composition was 71.0 mm/s without binder. The burning rate decreased to 38.1 mm/s by adding 3.0 % fish glue. When 1.0 % CMC was added to the mixture, the burning rate decreased to 61.8 mm/s. By adding 3.0 % dextrin to the delay composition, the burning rate decreased to 38.2 mm/s. The burning rate of Si/PbO/Pb₃O₄ delay mixture was 38.6 mm/s without binder. The burning of this mixture decreased to 16.4 mm/s by adding 1.0 % fish glue. The loading pressures were varied from 103 to 414 MPa. The effect of loading pressures on the burning rate of both the delay compositions was marginal. The burning rate of B/BaCrO₄ delay mixture decreased with the increase in loading pressure. On contrary, the change in burning rate of Si/PbO/Pb₃O₄ pyrotechnic delay composition was minimal by varying the loading pressures. Results also revealed that loading pressures of 345 and 348 MPa produced the minimum standard deviation in burning rate of B/BaCrO₄ and Si/PbO/Pb₃O₄ compositions. The consolidated density and %TMD of both mixtures increased by adding binders and increasing the loading pressures.     

Fabrication of Micro-pipes of YBa2Cu3O7−δ Superconductor

Synthesis of micro-pipes of YBa₂Cu₃O_7−δ superconductor has been carried out for the first time by using chemical method. The shape, size and length of these micro-pipes depends upon dimensions of growth matrix and structure of geometry, i.e., circular, square, rectangular and hexagonal, etc., which could be uniformly coated with superconductor. The onset temperature of diamagnetism of the material is found to be 93 K, which is not shifted to lower values by the application of DC magnetic field; this is most likely due to large surface area provided by micro-pipes to the shielding currents. These micro-pipes behave as pinning centers, hence they can be used for the fabrication of devices that are capable of working in high magnetic fields.      

Pollen morphological investigations of family Cactaceae and its taxonomic implication by light microscopy and scanning electron microscopy

The family Cactaceae is the diversified group of angiosperm plants whose pollen statistics has been used for taxonomic identification. In this article, we present the pollen morphology of eight species belong to seven taxonomically complex genera of Cactaceae including Astrophytum, Cylindropuntia, Echinocereus, Echinopsis, Mammillaria, Opuntia, and Thelocactus using light and scanning electron microscopy. The pollen grains were acetolyzed, measured, described, and electron photomicrographs were taken. Cactaceae can be characterized by presenting different palynomorphological features including pollen type, sculpturing, polar and equatorial diameter, aperture orientation, exine thickness, P/E ratio, and echini features. Four types of pollen shapes, that is, prolate spheroidal (three species), subprolate (two species), prolate (two species), and oblate spheroidal in Echinocereus reichenbachii were observed. The polar and equatorial diameter observed maximum in O. ficus indica 116.95 and 112.27 μm while minimum in M. compressa 38.42 and 21.05 μm. Pollen of two types, tricolpate in members of subfamily Cactioideae and pantoporate in the Opuntioideae were examined. The fertility percentage has been observed maximum in Opuntia macrocentra (83.84%) and minimum in Opuntia ficus‐indica (57.89%). Exine sculpturing showing great variations such as granulate, reticulate, granulate perforate and micro‐echinate foveolate ornamentation was examined only in Echinopsis eyriesii. A key to species, based on pollen micromorphological attributes, has been constructed for correct identification of complex cactus species.     

Role of isophorone diisocyanate in the optimization of adhesion tendency of polyurethane pressure sensitive adhesives

The present work describes the role of accurate selection of diisocyanate on the adhesion strength of polyurethanes (PUs). The concentration of diisocyanate induces the hard segment (HS) in the main architecture of PUs which decides the viscoelastic properties of the polymers. A balanced ratio of viscoelastic properties ultimately determines the adhesion strength. The composition of the polymers consists of a blend of macrodiol of hydroxyl-terminated polybutadiene and polypropylene glycol with different molecular weights. Isophorone diisocyanate (IPDI) is used to develop the urethane linkages by maintaining its contribution from 28 to 67% as HS contents. It determines the adhesion strength of the final product. The adhesion strength is evaluated by texture analyzer and 180° peel test. The probe tack analysis shows maximum adhesion energy of 156.2 J cm⁻² and 180° peel test shows 18.80 N/25 mm peel force. The glass-transition (T _g) values obtained through differential scanning calorimetry are in good agreement with theoretically calculated Flory–Fox temperature. The proportion of the loss tangent to the storage modulus (tan δ/E′) shows the optimum value of 2.80 MPa⁻¹. The ideal concentration of IPDI results to achieve better adhesion properties of PU pressure sensitive adhesives. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47124.