Highly Conductive Graphene Electronics by Inkjet Printing

Journal of Electronic Materials - Graphene is currently emerging as an alternative to traditional conductive materials, such as copper and silver because of its excellent electrical conductivity...     

Ultrasonic Cavitation-Assisted and Acid-Activated Transcytosis of Liposomes for Universal Active Tumor Penetration

Active tumor penetration has been recently recognized as a promising strategy to resolve the limitation of nanomedicine in terms of tumor penetration, but it is challenging to develop active transporting nanocarriers. Here, an ultrasonic cavitation-assisted and acid-activatable active transporting liposome for a broad range of tumors is reported. The active transporting liposome (size and charge dual-conversional gemcitabine prodrug-integrated liposomal nanodroplet (SCGLN)) overcomes the tight blood vessel walls with the aid of ultrasonic cavitation. The SCGLN subsequently transforms from micro-size to nano-size under prolonged ultrasound radiation. Once in the acidic tumor microenvironment, the nanosized SCGLN undergoes negative-to-positive charge-reversal and triggers the cationization-initiated transcytosis to penetrate deep into tumor parenchyma. The gemcitabine-loaded SCGLN exhibits potent antitumor activity in multiple poorly permeable tumor models, which completely erases subcutaneous U251 glioma and stops the progression of orthotopic BxPC3 pancreatic ductal adenocarcinoma. This study presents a promising and universal strategy to develop active penetrating nanomedicines for efficient drug delivery in the low permeable tumor.     

LiF—AlF3系熔体热力学性质的计算

用AIF_6~(3-)络合离子逐级分解模式和亚晶格溶液模型计算了LiF-AlF_3熔体中AlF_6~(3-)逐级分解常数和分解能分解常数依次为K_1=1.6×10~(-1),K_2=1.02,K_3=8.0×10~(-2);分解能为H_1=25.7kJ/mol,H_2=30.0kJ/mol,H_3=63.6kJ/mol计算表明,LiF-AlF_3熔体中的络合离子AlF_6~(3-)较其他碱金属冰晶石体系中的AlF_6~(3-)有更强的分解趋势和较小的分解能本文还计算了LiF-AlF_3熔体中各组成的摩尔浓度及其它溶液混合热力学量,计算结果与实验值吻合较好     

高温烧结合成铁锌、铁镍尖晶石

通过简单氧化物的高温加成反应,烧结合成了ZnFe2O4和NiFe2O4两种尖晶石类复合氧化物．烧结合成条件分别为NiFe2O4：Po2=21278.2Pa,1100℃烧结6h。ZnFe2O4：Po2=21278.2Pa,1210℃烧结20h．     

LOW TEMPERATURE ALUMINUM ELECTROLYSIS IN NaF-AlF3-BaF2-CaF2 BATH SYSTEM

１ＩＮＴＲＯＤＵＣＴＩＯＮＳｉｎｃｅｔｈｅＨａｌＨｒｏｕｌｔｐｒｏｃｅｓｗａｓｉｎｖｅｎｔｅｄｏｎｅｈｕｎｄｒｅｄｙｅａｒｓａｇｏ,ｉｔｈａｓｂｅｎｔｈｅｏｎｌｙａｌｕｍｉｎｕｍｐｒｏｄｕｃｔｉｏｎｍｅｔｈｏｄｉｎｔｈｅｗｏｒｌｄ［１］．Ｔｈｅ...     

LED负载LLC谐振变换器参数设计

由于LED负载的等效电阻具有可变的特性,传统的电阻负载LLC谐振电路参数设计方法不再适用于LED负载LLC谐振电路参数设计.在电阻负载LLC谐振电路参数设计的基础上,提出一种新的设计方法,使LLC谐振电路在LED负载正常工作范围内满足零电压开关(ZVS);介绍了详细的公式推导和设计过程.基于所提出的方法,以一个谐振频率为100 kHz,额定输入电压为400 V的两路LED灯串为例,给出了设计和仿真结果,验证了新设计方法的可行性.     

一种线性RC压控振荡器的设计

基于LLC串联谐振芯片的应用,提出了一种线性RC压控振荡器.在传统RC振荡器的电容上叠加一个压控电流源,实现了频率受电压线性控制.仿真结果表明,该电路在典型参数下振荡器频率范围为140～280 kHz,在-40℃～125℃温度范围内可保持正常工作,且可通过外部电阻电容进行设置.该振荡器已被应用于脉冲频率调制模式下工作的LLC串联谐振芯片.     

LLC模式LED驱动的精确调光补偿算法及实现

提出了一种用于LLC模式LED驱动的精确调光补偿算法及电路.在开启过程中,积累LED电流实际值与预设值的偏差量,在PWM关断信号出现后,释放积累电荷量并推迟环路关断,实现精确调光补偿效果.基于此原理,设计了精确调光补偿算法电路,该算法电路包括与误差放大器关联的跨导放大器、误差积累与释放电路、PWM信号延展电路.对采用该算法电路的LLC系统进行仿真,结果表明,在恒流过程无偏差的情况下,有效PWM占空比延展了3.3％,即调光精度至少提高3.3％.     

304不锈钢在太阳能热水器行业的应用

从不锈钢材料及太阳能热水器内胆加工两方面,阐述了不锈钢内胆翻孔开裂及腐蚀失效的预防措施。