齐大山铁矿南帮含水构造带探测研究

为解决采空区突发涌水给矿山安全生产带来的安全威胁,以齐大山铁矿为研究对象,以高密度电阻率法含水构造带理论模型的正演模拟研究为基础,运用高密度电阻率法对采场南帮含水构造带的异常范围进行了圈定;运用瞬变电磁法进行了二次探测,并对高密度电阻率法所圈定的异常范围进行了验证。研究表明:含水构造带显示为低阻异常特征,在高密度电阻率法探测成果图中显示的两处低阻异常与含水构造带理论模型的正演模拟结果一致;同时,在瞬变电磁法探测成果图中显示的低阻区域均在高密度电阻率法所圈定的低阻异常范围内,二者相互验证,这两处低阻异常均为含水构造带的地球物理异常特征的显示,表明采用高密度电阻率法和瞬变电磁法组合识别技术可实现对隐伏含水构造带的先导性探测。     

Transesterification of Palm-based Methyl Palmitate into Esteramine Catalyzed by Calcium Oxide Catalyst

The technology for transesterification reactions between methyl esters and alcohols is well established by using classical homogeneous alkaline catalysts, which provide high conversion of methyl esters to specialty or nonindigenous esters. However, in certain products where the purity of the esters is of concern, the removal of homogeneous catalysts after the completion of the reaction is a challenge in terms of production cost and water footprint. Therefore, a study to investigate the potential of heterogeneous catalysts was conducted on reactions between methyl palmitate and triethanolamine. The degree of basicity and active surface area of calcium oxide (CaO), zinc oxide (ZnO), and magnesium oxide (MgO) were first characterized by using temperature-programmed desorption (TPD-CO₂) and Brunauere–Emmett–Teller (BET), respectively. Among the metal oxides investigated, the CaO catalyst showed the best catalytic activity toward the transesterification process as it gave the highest conversion of methyl palmitate and yielded fatty esteramine compositions similar to the conventional homogeneous catalyst. The optimum transesterification condition by using the CaO catalyst utilized a lower vacuum system of approximately 200 mbar, which could minimize a considerable amount of energy consumption. Furthermore, low CaO dosage of 0.1% was able to give a conversion of 94.5% methyl ester and formed esteramine at 170 °C for 2 h. Therefore, the production of esterquats from esteramine may become more economically feasible through the methyl ester route by using the CaO catalyst, which can be recycled three times.     

基于TRIZ理论滤咀排列鼓工装夹具优化设计

针对滤咀排列鼓工装夹具所存在的制造难度大,精度难于保证,效率低的问题。利用TRIZ理论进行分析,根据技术矛盾解决方法并结合问题的实际情况,获得了具体可行的解决方案。经过实践证明,此设计方案是可行的、可靠的,大大缩短了夹具的加工周期,提高了生产效率,节约了成本。     

秸秆微晶纤维素用作片剂崩解剂的初步评价

对实验室自制秸秆微晶纤维素用作片剂崩解剂进行了初步评价。参照《中国药典》(2010版)中微晶纤维素的有关规定,评估自制秸秆微晶纤维素的质量;以阿司匹林为模型药物,以市售微晶纤维素(PH-101)为对照,测定秸秆微晶纤维素的溶胀性、崩解性。结果表明,自制的秸秆微晶纤维素质量符合《中国药典》有关规定,且溶胀性和崩解性优于市售微晶纤维素(PH-101),可用作片剂崩解剂。在秸秆微晶纤维素含量为20%时,崩解速度最快。     

Single-Crystalline TiO2(B) Nanobelts with Unusual Large Exposed {100} Facets and Enhanced Li-Storage Capacity

The {100} facet of single-crystalline TiO₂(B) is an ideal platform for inserting Li ions, but it is hard to be obtained due to its high surface energy. Here, the single-crystalline TiO₂(B) nanobelts from H₂Ti₃O₇ with nearly 70% {100} facets exposed are synthesized, which significantly enhances Li-storage capacity. The first-principle calculations demonstrate an ab in-plane 2D diffusion through the exposed {100} facets. As a consequence, the nanobelts can significantly accommodate Li ions in LiTiO₂ formula with specific capacity up to 335 mAh g⁻¹, which is in good agreement with the electrochemical characterizations. Coating with conductive and protective poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate), the cut-off discharge voltage is as low as 0.5 V, leading to a capacity of 160.7 mAh g⁻¹ after 1500 cycles with a retention rate of 66% at 1C. This work provides a practical strategy to increase the Li-ion capacity and cycle stability by tailoring the crystal orientation and nanostructures.     

碎软煤层条带瓦斯地面高效抽采技术研究

为了提高碎软煤层条带瓦斯抽采效率和效果,基于目前地面瓦斯抽采主要采用垂直井或从式井的方式抽采效果差、效率低的现状,通过理论和实验分析论证了穿岩层压裂改造煤储层的可行性,提出了在目标煤层顶板岩层中钻水平井,并通过垂直向下射孔以及采用泵送桥塞分段进行压裂的方式进行地面瓦斯抽采。试验结果表明:顶板分段压裂水平井单井产量高、高稳产期更长、产量衰减更慢;有效水平井段控制区域内瓦斯下降均匀,更有利于进行条带瓦斯抽采;相同投资条件下,采用水平井的方式瓦斯抽采效率和投入产出比更高。     

煤矿工业场地道路照明接地系统问题探讨

文章简要介绍了煤矿工业场地的特点和低压配电系统接地方式分类,从安全性、经济性的角度分析了TN接地系统和TT接地系统在道路照明回路中的优缺点。通过对比TN-S系统与TT系统的接地故障电流差异、TN-S接地系统用于道路照明的等电位联结困难程度,总结出煤矿工业场地的道路照明配电系统适宜采用TT接地方式。并且详细阐述了TT接地系统剩余电流动作保护器保护整定方法和灵敏度校验方法,列举了煤矿工业场地道路照明选用TT系统时需要注意的中性线不可重复接地的问题。     

5-二茂铁基噁唑的合成研究

以二茂铁甲醛和对甲苯磺酰基异氰(TOSMIC)为原料,经过Van Leusen反应,一步合成目标化合物5-二茂铁基噁唑,通过~1HNMR、~(13)CNMR和ESI-MS对其结构进行表征,并对影响收率的主要因素进行考察。结果表明,在物料比n(TOSMIC)∶n(二茂铁甲醛)为1.1∶1、反应溶剂为甲醇、K_2CO_3用量即n(K_2CO_3)∶n(二茂铁甲醛)为2.0∶1、反应温度为65℃、反应时间为8 h的最佳条件下,目标化合物收率达到74.7%。该方法具有原料廉价易得、反应操作简单、收率高等优点,具有一定的应用价值。     

砖混再生粗骨料混凝土力学性能及工程应用研究

采用城市砖混结构拆除建筑垃圾加工制成的再生粗骨料,用不同配合比设计方法制备了砖混再生粗骨料混凝土,研究了砖混再生粗骨料对混凝土工作性、抗压强度、弹性模量、峰值应力、峰值应变以及应力应变关系的影响.结果 表明,相比较天然骨料和废弃混凝土制备的再生骨料,砖混再生骨料空隙率大,吸水率大,压碎指标高.使用附加用水量配合比方法制备的砖混再生粗骨料混凝土在力学性能上低于标准配合比方法制备的砖混再生粗骨料混凝土,但工作性能较好.随着砖混再生粗骨料取代率的增加,再生混凝土的力学性能呈现不同程度的降低.当取代率为100％时,使用标准配合比和附加用水量方法制备的再生混凝土28 d抗压强度分别降低了26.1％和11.9％,弹性模量分别降低了23.9％和22.9％,峰值应力分别降低了13.0％和21.9％,峰值应变分别增大了25.3％和14.9％.工程实践表明,采用砖混再生粗骨料配制的再生混凝土可以满足中低强度等级泵送混凝土的性能要求.