冲压件小螺纹底孔翻边参数的修正

结合长期的实践体会,分析了冲压件小螺纹底孔翻边参数,对冲压件小螺纹底孔部分翻边参数进行了有效的修正,修正后的参数在长期的运用中效果较佳。     

胫骨生物陶瓷复合材料的微结构增韧机理

扫描电镜观察显示胫骨是一种由羟基磷灰石和胶原蛋白组成的自然生物陶瓷复合材料.羟基磷灰石具有层状的微结构并且平行于骨的表面排列.观察也显示这些羟基磷灰石层又是由许多羟基磷灰石片所组成,这些羟基磷灰石片具有长而薄的形状,也以平行的方式整齐排列.基于在胫骨中观察到的羟基磷灰石片的微结构特征,通过微结构模型分析及实验,研究了羟基磷灰石片平行排列微结构的最大拔出能.结果表明,羟基磷灰石片长而薄的形状以及平行排列方式增加了其最大拔出能,进而提高了骨的断裂韧性.     

锤杆导程及导板拉伤的修补工艺

介绍了空气锤锤杆导程及导板拉伤缺陷及其修复工艺，效果十分理想。     

FeCrAIW电弧喷涂层组织的致密化研究

采用激光辐照对FeCrAlW电弧喷涂层的组织进行致密化处理,借助扫描电镜和X衍射对涂层的组织进行了分析.测试了涂层的显微硬度.结果表明:涂层组织致密度提高,孔隙率明显降低.随着激光扫描速度的增加,涂层的显微硬度降低.在较低的扫描速度下,涂层与基体之间形成互熔区,涂层与基体之间产生良好的冶金结合.     

钢材打捆机控制系统智能化技术的研究

钢材打捆机是一种用于轧钢精整工艺的新型自动化设备，其控制系统基于SiemensS7 PLC和TP7触摸屏。系统的智能化技术主要包括：液压高低压自动控制、在线监视、离线故障检测、多台设备协同工作、可视化人机交互技术。本文描述了这些技术的原理与实现方法。     

Development of the technology of ultrasonic welding of components made of Capron tapes

The technology of ultrasonic welding of components made of Capron tapes producing welded joints with high strength parameters has been developed. The numerical values of the main parameters of the conditions of ultrasonic welding of the Capron tapes are determined. It is shown that the increase in the amplitude and welding pressure shortens the welding time. The experimental results show that the Capron tapes are characterized by geometrical homogeneity in both the transverse and longitudinal direction so that the welded joints can be produced both along and across the tape.     

面向零件形状的计算机图形库的开发

论述了CAD技术中参数化设计的三种建模方法，重点介绍了基于特征的参数化建模原理。在此基础上，分析机械设计中的机构结构，归纳出其零件的几何特征构成。设计了机构CAD图形库，并提出了该图形库生成步骤和人机交互界面。     

Analysis of plastic bending of adhesive-bonded sheet metals taking account of viscoplasticity of adhesive

The present authors proposed a new technique of plastic bending of adhesive-bonded sheet metals. In this process, large transverse shear deformation occurs in the adhesive layer, which in some cases would induce the geometrical imperfection (so-called ‘gull-wing bend’) and the delamination. Since the strength of the adhesive is highly rate-sensitive, the amount of shear deformation of the adhesive layer and, as a result, ‘gull-wing bend’, are strongly influenced by the forming speed. In the present work, the effect of forming speed on the deformation characteristics of adhesively bonded aluminium sheets was investigated by performing V-bending experiments with various punch speeds at room temperature. In order to discuss the effect quantitatively, the numerical simulations for the bending were also conducted using a rate-dependent constitutive model of plasticity for the adhesive. Consequently, it was found that the large shear deformation and ‘gull-wing bend’ are suppressed by high-speed forming since the deformation resistance becomes higher at high strain rate.     

非神经性 AChRs 对脾淋巴细胞增殖的调节作用及药理学特征

目的: 观察淋巴细胞非神经性AChRs对脾淋巴细胞增殖的调节作用。方法: 利用MTT比色法检测AChRs激动剂氨甲酰胆碱对刀豆蛋白A诱导的离体小鼠脾淋巴细胞增殖反应的影响。结果: 氨甲酰胆碱在不同的浓度呈现不同的作用,在10^-11~10^-9mol·L^-1和10^-5~10^-4mol·L^-1时显著促进淋巴细胞的增殖,阿托品(10^-7mol·L^-1)可以阻断该效应。而氨甲酰胆碱(10^-7~10^-6mol·L^-1)可显著抑制淋巴细胞的增殖,美加明(10^-7mol·L-1)可以阻断其作用。提示氨甲酰胆碱在10^-11~10^-9mol·L^-1和10^-5~10^-4mol·L^-1可通过激活mAChRs促进淋巴细胞的增殖,而在10^-7~10^-6mol·L^-1通过激活nAChRs抑制淋巴细胞的增殖。结论: 氨甲酰胆碱通过激活非神经性mAChRs和nAChRs对淋巴细胞增殖反应产生促进增殖和抑制增殖的双向调节作用。     

Ab-initio calculation of enthalpies of formation of intermetallic compounds and enthalpies of mixing of solid solutions

A large number of ab-initio calculations of energies of formation of intermetallic compounds have been performed in the last 15 years. The currently used methods are listed. The paper presents a review of the aluminium based compounds which have been studied. Comparisons of calculated and experimental enthalpies of formation are provided for aluminim-3d and-4d transition metal alloys at equiatomic composition. The modelling of the enthalpies of mixing of solid solutions based on a given lattice is described.