Structural,morphological, dielectric and magnetic properties of Zn-Zr co-doping yttrium iron garnet

In this study, yttrium iron garnet co-doped with Zn and Zr atoms with a chemical formula Y₃Zn_xZr_xFe_(5−2x)O₁₂ (x = 0.0-0.3) has been successfully prepared by the solid-state reaction method. The effects of doping concentration on the microstructure, crystal structure, magnetic properties, and dielectric properties of Y₃Zn_xZr_xFe_(5−2x)O₁₂ were investigated. The microstructure analysis indicates that co-doping of YIG with Zn and Zr can effectively reduce the grain size of the ceramic. The crystal structure results reveal that the doping concentration of Zn–Zr has substantial influence on the lattice parameters of YIG, such as, increases the lattice constant, crystal cell size, and interplanar spacing. However, the second phase of ZrO₂ appears once x ≥ 0.15. Additionally, the dielectric properties of YIG ferrite can be regulated using this Zn–Zr co-doping method. Zn–Zr co-doping can improve the dielectric stability and reduce the dielectric loss at high temperature. The magnetization measurement shows that the saturation magnetization is stabilized at x < 0.15, and the magnetic loss is decreased with the increase in the doping concentration. Overall, the findings show that the ceramic with x = 0.1 exhibits better properties included high saturation magnetization (24.607 emu/g), low magnetic loss (0.0025 @ 1 MHz), and relatively low dielectric loss (496 @ 400°C).     

Effects of ethylene-octene copolymer (POE) on the brittle to ductile transition of high-density polyethylene/POE blends

Three kinds of ethylene-octene copolymers (POE) were melt-blended with high-density polyethylene (PE-HD) in different proportions. Detailed characterizations were conducted to analyze their structural differences of POE and its effects in toughening PE-HD. The higher molecular weight POE can improve the toughness of PE-HD. 60:40 PE-HD/POE is elongated to break up to 700% while impact strength is 84.7 kJ/m² at −30°C, which is 21-fold of PE-HD. In the brittle to ductile transition (BDT) during impact, the fracture mechanism changes from the crazing mode to the shear yield-plastic deformation mode. The BDT temperature decreases as the POE molecular weight and its content increase. The interface strength in tension is estimated to access their effects. The Boltzmann-type models were successfully extended to describe the typical S-shaped curves in BDT of notched impact strength vs POE content or temperature. The supplementary decay model is suggested for the attenuation in toughening. Transition map in impact is proposed to select the use range of composition (c ) and temperature (T ) for high toughness. The curves are converted into 3D graph of T -c -impact strength for illustrating their coupling-separate effects, and further into the contour map of impact strength in T -c space for finding their partial equivalence.     

基于VOF模型的层叠器流动过程分析及流道结构优化

基于FLUENT软件的流体体积(VOF)模型研究了不同壁面滑移程度以及不同流道结构参数下4层等厚熔体通过层叠器倍增为8层熔体时,流道中熔体的分层情况变化。结果表明,壁面滑移程度的降低会促使熔体在上下壁面聚集,进而导致上下壁面处熔体层厚增加;汇流段与出口段间圆角半径、汇流段扩压角和平衡段长度这3个结构参数则只会影响熔体在左右壁面的聚集,进而影响各层熔体的尺寸精度,且其中扩压角的影响程度最大,平衡段长度次之,圆角半径的影响较小。     

人纤维蛋白原对急诊外伤致创伤性凝血病疗效及相关因素分析

目的:探讨人纤维蛋白原(fibrinogen，FIB)对急诊创伤性凝血病患者的临床疗效及相关因素。方法:将2015年6月至2018年6月本院收治的100例严重创伤患者纳入本研究，根据是否创伤性凝血病分为凝血病组(80例)和非凝血病组(20例)。比较凝血病组和非凝血病组患者收住后第1个24 h的急性生理和慢性健康评分(acute physiology and chronic health evaluation II，APACHE II)、创伤严重程度评分(injury severity score，ISS)、低体温及低灌注发生率等指标。采用Logistic多因素回归方法分析严重创伤患者发生创伤性凝血病的相关因素。将80例创伤性凝血病患者随机分为观察组(40例)和对照组(40例)。对照组按照常规诊疗措施治疗，观察组在对照组处理基础上给予人FIB，比较治疗前后观察组和对照组的凝血功能指标，及治疗后的临床用血量、住院时间及病死率。结果:与治疗前相比，治疗后观察组和对照组的凝血酶原时间(prothrombin time，PT)、活化部分凝血活酶时间(activated partial thromboplastin time，APTT)及D-二聚体水平降低(P<0.05)，FIB水平明显升高(P<0.05)。观察组的红细胞(red blood cell，RBC) 输注量、新鲜冰冻血浆(fresh frozen plasma，FFP)输注量、重症加强护理病房(intensive care unit，ICU)时间及病死率均明显低于对照组，差异具有统计学意义(P<0.05)。创伤性凝血病患者PT>18 s(r=0.623，P=0.024)、APTT>60 s(r=0.722，P=0.018)、凝血酶时间(thrombin time，TT)>15 s(r=0.719，P=0.033)与ISS评分呈正相关。碱缺失(base deficit，BD)≥6(OR=3.678，95%CI=1.065～9.417)、格拉斯哥评分(Glasgow coma scale，GCS)≤8(OR=5.299，95%CI=1.122～8.711)和血小板(platelet，PLT)计数(OR=0.982，95%CI=0.971～0.996)是严重创伤患者发生创伤性凝血病的独立预测因素。结论:人FIB可有效改善创伤性凝血病患者的凝血功能，降低病死率、缩短ICU时间，创伤性凝血病与创伤严重程度、合并休克、低体温和重型颅脑损伤存在一定的相关性。     

不同制样方法对直流辉光放电质谱法测定氮化硼中27种杂质元素的影响

讨论了3种制样方法对直流辉光放电质谱法(dc-GDMS)检测氮化硼中的Na、Mg、Al、Si等27种杂质元素的影响。3种制样方法分别如下所示:方法1,直接把氮化硼压在铟薄片上;方法2,把氮化硼压在铟薄片上后,再盖上一层铟罩;方法3,把压碎后的氮化硼放在针状钽勺上。在优化的辉光放电参数下对比了3种不同制样方法对基体信号强度的影响。试验表明:在方法1中,当氮化硼尺寸约为3mm×3mm,厚度小于1mm时,基体¹¹B的信号可达1.8×10⁷ cps;在方法2中,选择铟孔大小合适的铟罩,基体¹¹B的信号可达1.0×10⁷ cps;方法3获得基体信号强度比方法1、方法2高一个数量级。大部分元素在中分辨率下可获得较好的结果,而对于在高分辨率下也较难分离的元素,可选择丰度较低的同位素在中分辨率下进行测定,如Ge选择⁷⁰Ge⁺,Se选择⁸²Se⁺,Cd选择¹¹¹Cd⁺,Sn选择¹¹⁹Sn⁺,Ag选择¹⁰⁹Ag⁺,Pt选择¹⁹⁴Pt⁺。氮化硼中的杂质元素含量可通过样品片中待测元素含量减去来自于铟薄片或钽勺中该元素贡献的含量来计算获得。将样品平行测定5次,相对标准偏差均在20%以内。对于Al、Si、Ti等元素的测定,3种制样方法的测定结果基本一致;方法1、方法2中检测到的In含量较大,使得铟中的Ni、Cu对氮化硼的测定值影响较大;方法3由于钽中Fe、Cu的贡献导致氮化硼中Fe、Cu的检测值较大,但方法3获得的基体信号强度大,可降低部分元素的检出限,如Cr、Mn、Ga、Ge等。综上所述,方法3为优选方法。     

Tuning effect of silicon substitution on magnetic and high frequency electromagnetic properties of R2Fe17 and their composites

In this work, we report the tuning effect of the Si substitution on the magnetic and high frequency electromagnetic properties of R₂Fe₁₇ compounds and their paraffin composites. It is found that the introduction of Si can remarkably improve the magnetic and electromagnetic properties of the R₂Fe₁₇ compounds, making the R₂Fe_17–xSi_x-paraffin composites excellent microwave absorption materials (MAMs). By introducing the Si element, their saturation magnetizations decrease slightly, while much higher Curie temperatures are obtained. Furthermore, better impedance match is reached due to the decrease of the high-frequency permittivity ε′ by about 40%–50%, which finally enhances the performance of the microwave absorption. The peak frequency (f_RL) of the reflection loss (RL) curve moves toward high frequency domain and the qualified bandwidth (QB, RL ≤ ?10 dB) increases remarkably. The maximum QB of 3.3 GHz (12.0–15.3 GHz) is obtained for the Sm_1.5Y_0.5Fe₁₅Si₂-paraffin composite (d = 1.0 mm) and the maximum RL of ?53.6 dB is achieved for Nd₂Fe₁₅Si₂-paraffin composite (d = 2.2 mm), both surpassing most of the reported MAMs. Additionally, a distinguished dielectric microwave absorption peak is observed, which further increases the QB in these composites.     

5-二茂铁基噁唑的合成研究

以二茂铁甲醛和对甲苯磺酰基异氰(TOSMIC)为原料,经过Van Leusen反应,一步合成目标化合物5-二茂铁基噁唑,通过~1HNMR、~(13)CNMR和ESI-MS对其结构进行表征,并对影响收率的主要因素进行考察。结果表明,在物料比n(TOSMIC)∶n(二茂铁甲醛)为1.1∶1、反应溶剂为甲醇、K_2CO_3用量即n(K_2CO_3)∶n(二茂铁甲醛)为2.0∶1、反应温度为65℃、反应时间为8 h的最佳条件下,目标化合物收率达到74.7%。该方法具有原料廉价易得、反应操作简单、收率高等优点,具有一定的应用价值。     

基于强化学习的电力市场信息披露程度对市场成员交易行为影响研究

基于信息披露的主体框架，分析披露体系中具体的供需信息对于市场成员的引导作用。建立日前市场的双层竞价优化模型，采用强化学习的方法，通过市场中有无关键供求信息披露对于发电商报价预期的影响，推演模拟不同信息披露程度下发电商报价行为，然后从策略演化过程、策略偏离度以及策略收敛速度3个角度进行信息披露程度对市场成员交易行为影响的定量分析，验证市场供需信息的发布程度对于市场成员的引导作用，最后基于推演结果进行总结，并对我国信息披露的建设提出建议与思考。     

燃油选择性吸附脱硫的多孔材料研究进展

吸附脱硫技术具有操作条件温和、节能、不改变燃油品质和成本低等特点而备受关注。针对噻吩类难脱除硫化物的深度脱除和转化问题，综述了近年来应用多孔吸附材料选择性吸附超深度脱除燃油中噻吩类硫化物的作用机理及最新研究进展。重点分析了分子筛、金属有机骨架、多孔炭材料、复合材料等不同吸附剂的研究现状，并探讨了各种吸附材料的吸附机理、改性方式和优缺点。本文指出分子筛因优异的热稳定性、高比表面积、均一的孔道结构、低成本和易于工业化等特点，是目前最具优势的吸附剂材料。未来研究应着重阐明吸附机理、提高合成便捷性、脱硫性能以及再生能力，更全面系统的研究将为开发具有理想选择性和再生能力的高效吸附剂奠定基础。     

链轨节用钢15B36Cr的开发与试制

淮钢采用90 t顶底复吹转炉-LF-RH-200 mm×200 mm连铸-连轧工艺流程试生产了2炉Φ60 mm链轨节用钢15B36Cr(/%:0.30～0.37C、0.15～0.30Si、1.20～1.50Mn、≤0.040P、≤0.0505、0.20～0.40Cr、≤0.25Ni、≤0.35Cu、≤0.06Mo、0.0005～0. 0030B)。通过加严影响淬透性化学成分,控制出钢碳≥0.08%,转炉有效挡渣和下渣检测系统控制下渣,LF炉铝粒和电石渣面脱氧,RH最低真空度处理20～30 min,结晶器电磁搅拌、末端电磁搅拌和连铸低过热度保护浇铸等工艺措施,15B36Cr钢的化学成分稳定控制在内控范围内,除了B粗以外,其他类型非金属夹杂物级别全部控制在1.0以内,淬透性控制在较窄的范围内,试制钢种关键技术指标达到客户和预期设计要求。