浅谈采用短木桩加土工网碎石垫层处理挡墙软基

结合工程实例，对采用传统的短木桩加新兴的土工合成材料——土工网及碎石垫层构成复合基础，处理河岸挡墙软基进行探讨，该方法在软土层厚度不超过4．0m的条件下，技术可靠，施工简单，工期短，造价低。     

世界及我国电解铜箔业的发展回顾

印制电路板用电解铜箔产品在世界上已经历了近五十年的发展历程。本文从电解铜箔的生产、市场、技术等方面,记述、回顾了世界及我国的发展过程和有关的重要事件。     

Behavioral Phenotype of the Reeler Mutant Mouse: Effects of Reln Gene Dosage and Social Isolation.

Reeler (rl/rl) and reeler/wild-type (+/rl) mice synthesize Reln at subnormal rates, as do patients with schizophrenia, bipolar disorder, and autism, thereby forming the basis for a Reln hypothesis for vulnerability to these psychopathologies and justifying attention to the behavioral phenotypes of Reln-deficient mice. Tests of gait, emotionality, social aggression, spatial working memory, novel-object detection, fear conditioning, and sensorimotor reflex modulation revealed the behavioral phenotype of rl/rl, but not +/rl, mice to be different from that of wild-type (+/+) mice. These results reveal no effect of Reln gene dosage and provide significant challenges to both the Reln and the neurodevelopmental hypotheses of the etiology of major psychopathologies. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

压电振子径厚耦合振动的二维等效电路研究

提出了一种轴向极化压电圆环和圆片的径厚二维耦合等效电路模型。应用这一模型分析了它们的耦合振动,比较了不同尺寸比例下耦合振动与单一模式振动的异同,发现这种方法比一维等效电路方法能在较宽尺寸范围内更准确的分析压电振子的振动问题。有限元计算和试验测量结果验证了这一模型对压电振子频率计算的准确性。     

微波电路互联与制造技术

介绍微波电路CAD与优化、微波集成电路及其制造、微波互联材料与工艺、微波MEMS等微波电路互联与制造新工艺、新技术的国内外研究和发展动态。     

偏心磨损套管应力分布的双极坐标解答

因井眼狗腿度和钻柱的受力变形造成套管内壁磨损,导致套管抗挤毁强度和抗内压强度降低。内壁磨损套管的横截面形状多为月牙形,很难得到其应力分布的解析解。文章将其简化为偏心圆筒模型,并把直角坐标向双极坐标转换,得出了偏心磨损套管在内外压联合作用下应力分布的解析解。以139.7 mm×7.7 mm-N80套管为例,得出了套管剩余壁厚为4.2 mm时,偏心圆筒模型的应力分布曲线,确定了影响磨损套管应力分布的主要因素。     

Analysis and Optimization of Noise in Bipolar RF Harmonic Mixers

A noise analysis of bipolar harmonic mixers (BHM) used for direct-conversion receivers is presented in this paper. Analytical and simulated results for the transfer function of the mixer are presented. Simple analytical expressions describing noise contribution from all sources are derived. Estimation of flicker noise quite agrees with harmonic-balance simulation results. Based on the derived expressions, total time average noise power spectral density (PSD) at the output is compared with simulation results. For the recommended regions of operation, error is less than 20%. The overall BHM noise figure (NF) is calculated and optimized based on a simple extracted formula. Errors introduced by analysis remain within a 1.5-dB margin with respect to simulation results. The validity of analysis for high frequencies is justified. The effect of flicker noise coefficient on the overall mixer NF is compared for different available processes.     

一种抗干扰能力极强的计算机通信接口电路

设计了一种结构简单，抗干扰能力极强的计算机通信接口电路。该电路利用模拟开关实现了全数字二态电平（1，0）与三态电平(1，0，-1)之间的相互转换；利用模拟开关导通电阻的动态效应以及MOS晶体管开启电压Vτ的衬偏效应，提高了接收电路的抗干扰能力，提出了一种与共模干扰无关的模拟数字混合接收电路。     

基于FPGA的红外焦平面成像电路的研究

介绍了以FPGA器件为核心的红外焦平面成像电路的组成原理，并对几个关键性技术进行了分析。     

连续小波变换VLSI实现综述

小波变换是信号处理、图像压缩和模式识别等诸多领域中一个非常有效的数学分析工具。然而，实时小波变换计算量大，需要专用硬件来实现。连续小波变换的VLSI实现在处理速度、功耗及适用频率范围方面部具有较明显的优势，且实现方法灵活。本文对近年来有关该领域的研究情况作了综合评述，讨论了其中存在的问题，并指出了今后的若干发展方向，特别是瞬时缩展电路技术是实现低电压低功耗小波变换芯片的重要途经之一。