结构陶瓷的高温疲劳强度衰减理论

提出了陶瓷材料疲劳强度衰减理论并由此导出了各种疲劳关系式。建立了疲劳基本方程ｄσ＿ｒ／ｄ＿ｉ＝一Ａσ（ｔ）￣ｎｔ￣（－ｍ），得出了疲劳寿命公式Ｔ＝Ｍ（σ＿０－σ）／Ａσ￣ｎ（静疲劳时Ｍ＝１，连续增载疲劳时Ｍ＝ｎ＋１，循环疲劳时Ｍ＝（ｎ＋１）／（１＋Ｒ＋Ｒ￣２＋……＋Ｒ￣ｎ），逐级加载时，并导出不同疲劳方式下疲劳寿命间的关系。同时，用多种Ｓｉ＿３Ｎ＿４材料在高温中作了论证试验，结果与理论一致。     

转炉炼钢静态模型的初步探讨

根据转炉炼钢的物理化学反应机理，从质量平衡和能量平衡的计算出发，通过小参数变动，导出了增量式静态模型中矿石方程和供氧方程的系数。所得结论与新日铁资料基本相符。同时，还进行了炉料和产物的计算，分析了改变废钢比对生产的影响。     

Directional features in online handwriting recognition

The selection of valuable features is crucial in pattern recognition. In this paper we deal with the issue that part of features originate from directional instead of common linear data. Both for directional and linear data a theory for a statistical modeling exists. However, none of these theories gives an integrated solution to problems, where linear and directional variables are to be combined in a single, multivariate probability density function. We describe a general approach for a unified statistical modeling, given the constraint that variances of the circular variables are small. The method is practically evaluated in the context of our online handwriting recognition system frog on hand and the so-called tangent slope angle feature. Recognition results are compared with two alternative modeling approaches. The proposed solution gives significant improvements in recognition accuracy, computational speed and memory requirements.     

Ensuring primary realization of pressure unit in the vacuum range without typically utilized static expansion system

After the break-up of Czechoslovakia in 1993 the primary metrological standards authority almost fully remained in Slovakia. So we had to build our primary vacuum metrology anew. But we could do it using uptodate techniques that are more effective and they enable us to fulfil our task more effectively and in a shorter time.The steady demand to widen the lower pressure range and a steady demand for maximal accuracy collide with the financial possibilities open to a small country. So it is impossible to follow the classical pattern for the vacuum standards: liquid columns, static expansion system and dynamic expansion system. But it is possible to utilize contemporary progress in construction of piston manometers. This enables us to discard liquid column and static expansion techniques in favour of piston technique [Tesar J, Prazak D. Vacuum 2002; 67: 311, Tesar J, Prazak D, Krajicek Z. In:Proceedings of international symposium on Pressure and Vacuum, 2003. p. 169, Tesar J, Repa P, Prazak D, Krajicek Z, Peksa L. Vacuum 2004; 76: 491.]. Such system fulfils all the needs of a little industrial country and is economically acceptable.     

同步电动机改型设计

对同步电动机从400V改为6000V过程中的几个问题通过实例进行分析说明,可供同步电机的改型设计参考。     

光纤式机器人触觉传感器静态特性的实验研究

介绍了一种光纤式机器人触觉传感器，分析了这种传感器的静态特性，并通过理论分析和实验研究提出了一种消除干扰的方法。实验结果证明，传感器的最大绝对误差为０．０５３ｋｇ，相对误差为０．６２％。     

深井重泥浆弱凝胶工艺技术初探

重泥浆强凝胶体系对钴井会产生不利影响。笔者结合川东地区的实际情况,分析了重泥浆强凝胶形成的原因和重泥浆弱凝胶的形成机制,提出了形成重泥浆弱凝胶体系的核心和设计原则,总结出了一套以正确使用泥浆添加剂并配合强有力的固控措施为主的成套深井重泥浆弱凝胶工艺技术,介绍了这套技术在川东地区的应用情况。实践证明,少用甚至不用泥浆降粘剂就可获得并维持尽可能低的静切力,使τ_s,10s为0.5—6Pα、τ_s,10min为2—12.5Pα。     

深亚微米数字集成电路的自动化设计方法学

介绍了基于标准单元库的数字集成电路设计流程和方法学。数字集成电路设计流程从行为级的HDL描述开始，依次进行系统行为级仿真，行为级综合，RTL仿真，逻辑综合，综合后仿真，自动化布局布线，版图后仿真等步骤。讨论了如何把物理设计环境和逻辑设计环境联系起来，以解决物理设计和逻辑设计相脱节的问题。     

应用时频表示进行结构时变模态频率辨识

本文应用线性和二次时频表示的方法，包括：线性时频分析方法短时傅里叶变换和二次时频表示魏格纳－维尔分布，进行了时变结构模态频率的辨识。通过对刚度连续变化的二自由度系统时变模态频率辨识的仿真，论述了两种时频辨识方法的特点。仿真结果表明时频变换辨识方法是辨识时变模态频率的有效工具，魏格纳－维尔分布二次时频表示能够是到比基于短时傅里叶变换的谱图更好的辨识结果。     

未掺杂半绝缘GaAs中受主及电中性EL2分布的研究

测量了未掺杂半绝缘（ＳＩ）ＬＥＣＧａＡｓ中总的、电中性的ＥＬ２及净受主浓度分布和碳分布。结果表明，总ＥＬ２浓度径向分布呈Ｗ形而不是均匀的，净受主浓度径向分布呈∧形或∩形而不是Ｍ形。电中性ＥＬ２的Ｗ形径向分布由总ＥＬ２浓度的Ｗ形径向分布决定，而不是由于净受主的不均匀分布。有些样品中净受主浓度远大于碳浓度．意味着这些样品中除碳外还存在高浓度的其它受主。