Vinyl ester/clay based nanocomposites: a complementary study of vinyl ester polymerization by hyphenated rheo‐Fourier transform infrared and separate rheology/Fourier transform infrared measurements

This work is focused on the complementary information obtained from advanced in situ Fourier transform infrared (FTIR) spectroscopy and rheological measurements to correlate the structural changes with rheological properties upon polymerization of different organically modified montmorillonite clay/vinyl ester composites prepared by in situ polymerization. The microstructure and morphology of the nanocomposites were examined by X‐ray diffraction and transmission electron microscopy. The effect exerted by the presence of organic clay on the polymerization reaction of a vinyl ester based polymer matrix was evaluated. In situ and ex situ rheo‐FTIR measurements were compared to demonstrate the accuracy of this technique. © 2013 Society of Chemical Industry     

Developing lithium ion battery silicon/cobalt core-shell electrodes for enhanced electrochemical properties

In this work, core-shell Si/Co composite powders were produced using an electroless deposition process. The effect of different concentrations of CoSO₄ in the plating bath was studied to provide the Co deposition and to reveal the structure on the surface of silicon powders. The surface morphology and the composition of the produced Si/Co composite powders were characterized using scanning electron microscopy (SEM), and energy dispersive spectroscopy (EDS). X-ray diffraction (XRD) analysis was performed to investigate the structure of the Si/Co composite powders. The discharge capacities of Si/Co composite electrodes were determined with cyclically testing, and resistivity of the produced Si/Co composite electrodes were studied using electrochemical impedance spectroscopy (EIS). The silicon/cobalt composite electrode produced using 40 g/L CoSO₄ exhibited the most stable capacity retention, and a discharge capacity of approximately 220 mAh/g was obtained after 15 cycles for this electrode. This study demonstrated that the conductivity of the electrodes was improved and the capacity retention of the Si/Co composite electrodes was increased by increasing the shell structured cobalt content on the surface of silicon powders due to the buffering effect of cobalt against huge volume changes during the lithiation and delithiation process.     

Synthesis and characterization of poly(ethylene tetrasulfide)/graphene oxide nanocomposites by in situ polymerization method

Poly(ethylene tetrasulfide) (PSP) is synthesized via interfacial polycondensation of 1,2 dichloroethane and sodium tetrasulfide, in the presence of graphene oxide (GO). This process resulted in homogeneously dispersed PSP/GO nanocomposites. Nanocomposites of 0.3 and 0.5?wt% of GO are synthesized and their morphology, chemical characteristics behavior are studied employing field emission scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray diffraction techniques. Thermal characterization of composites is performed by differential scanning calorimetry and thermogravimetry analysis. Results indicate that the addition of only small amounts (0.5?wt%) of well-dispersed GO can increase the melting point more than 16°C resulting in better thermal properties for the composite. The solubility of nanocomposite is also studied and results show that the solubility depends on solvent concentration in addition to reinforcement (GO) deals.     

Effect study of hexagonal mesoporous silica/polyaniline nanocomposite on the structural properties of polysulfone membranes and its heavy metal removal efficiency

New mixed matrix membranes of polysulfone were synthesized by different content of hexagonal mesoporous silica coated by polyaniline and used for nickel and lead ion removal. The membranes were characterized by FESEM, XRD, BET, TGA, and FTIR, and zeta potential measurements. The results showed that PANi/HMS particles enhanced the membrane porosity and permeability. These effects were explained according to an increase of the membrane hydrophilicity due to the formation of new functional groups during membrane casting. The results showed that metal ion rejection was performed by a filtration–adsorption mechanism, resulting in fixation of metal ions on the active sites of membranes.     

A mixed phase lanthanum vanadate in situ induced by graphene oxide/graphite carbon nitride for efficient photocatalytic hydrogen generation

A mixed phase LaVO₄ with high dispersion was in situ induced and implanted in graphene oxide-graphite carbon nitride composite. The obtained nanocomposite (GO–C₃N₄–LaVO₄) showed high and stable photocatalytic activity for hydrogen evolution, which significantly benefited from the improved charge separation and light absorption in the special composite photocatalyst as evidenced by UV–vis spectra, fluorescence spectrum, photocurrent response and electrochemical impedance. The fabrication strategy of mixed phase LaVO₄ in the GO-C₃N₄ provides a new idea for constructing cheap and active organic-inorganic semiconductor photocatalysts for hydrogen generation.     

Rational design and synthesis of upconversion luminescence-based optomagnetic multifunctional nanorattles for drug delivery

Optomagnetic multifunctional composite based on upconversion luminescence nanomaterial is regarded as a promising strategy for bioimaging,disease diagnosis and targeted delivery of drugs.To explore a mesoporous nanostructure with excellent water dispersibility and high drug-loading capacity,a novel nanorattle-structured Fe3O4@SiO2@NaYF4∶Yb,Er magnetic upconversion nanorattle (MUCNR) was suc-cessfully designed by using Fe3O4 as core and NaYF4∶Yb,Er nanocrystals as shell.The microstructures and crystal phase of the as-prepared MUCNRs were evaluated by transmission electron microscopy,X-ray powder diffraction and N2 adsorption/desorption isotherms.The Kirkendall effect was adapted to explain the formation mechanism of the MUCNRs.The loading content and encapsulation efficiency of doxorubicin hydrochloride (DOX) could reach as high as 18.2％ and 60.7％,respectively.Moreover,the DOX loading MUCNR (DOX-MUCNR) system showed excellent sustained drug release and strong pH-dependent performance,which was conducive to drug release at the slightly acidic microenvironment of tumor.Microcalorimetry was used to quantify the interactions between the carrier structure and drug release rate directly.The heat release rates in the heat-flow diagrams are basically consistent with the DOX release rate,thereby showing that microcalorimetry assay not only provides a unique thermody-namic explanation for the structure-activity relationship of Fe3O4@SiO2@NaYF4∶Yb,Er MUCNRs but also provides powerful guidance to avoid the blind selection or design of drug carriers.Therefore,our work firmly provided a comprehensive perspective for using Fe3O4@SiO2@NaYF4∶Yb,Er MUCNRs as a remark-able magnetic targeted drug carrier.     

超级电容器用MnO_2基纳米复合材料的进展

介绍二氧化锰(MnO_2)的结构及储能机理,综述近年来MnO_2作为赝电容材料,通过不同材料改性,以提高电化学性能的研究进展。这些材料主要有碳材料、导电聚合物、金属和金属氧化物/硫化物等。展望由MnO_2基纳米复合材料构建的核壳结构的发展趋势。     

Superparamagnetic Ag@Co‐Nanocomposites on Granulated Cation Exchange Polymeric Matrices with Enhanced Antibacterial Activity for the Environmentally Safe Purification of Water

Cation exchange polymeric matrices are widely used in water treatment protocols to reduce the mineral content of hard waters, even for human consumption. However, they are not antibacterial and flowing bacteria can be trapped in their structures and proliferate, thus acting as microbial contamination sources. Here, Ag@Co‐nanoparticles (Ag@Co‐NPs) with a low‐cost superparamagnetic Co⁰‐core and an antibacterial Ag‐shell are synthesized on granulated cation exchange polymeric matrices under soft reaction conditions. The presence of these NPs provides the final nanocomposite (NC) with additional functionalities (superparamagnetism and antibacterial activity) making it ideal for water purification applications. Ag@Co‐NPs are synthesized in situ on four cation exchange polymeric matrices containing either strong (sulfonic) or weak (carboxylic) acid functional groups homogeneously distributed (C‐type) or concentrated on an external shell (SST‐type) by the intermatrix synthesis (IMS) method. The NCs are characterized (metal content, NP size and distribution, metal oxidative state, and metal release) and evaluated for water purification applications.     

Colored amorphous silica-based powder with TiN nanocrystals precipitated by ammonolysis of Ti–Si–O ternary glass

Coloration of amorphous silica powder containing titania was investigated by nitridation in an ammonia flow. The oxide precursors were obtained by the hydrolysis of a mixture of tetraethyl orthosilicate (TEOS) and tetrabutoxy titanium (TBT). The color changed with the amount of TBT in the mixture, the hydrolysis pH and the ammonolysis temperature. The original white color of the 8 mol% TBT powder hydrolyzed under basic pH conditions changed to pale goldenrod at 700°C, then to dark olive green at 800°C, and further darkened with increasing ammonolysis temperature. A steel-blue color appeared at 900°C for the powder obtained with 3 mol% TBT, and increased in darkness at 1000°C. A similar bluish color was observed for powders obtained by acidic hydrolysis after ammonolysis above 900°C, and this was independent of the amount of titania, although the chroma decreased with increasing firing temperature for the powder with 3 mol% TBT. The ammonolysis powder products were characterized using X-ray diffraction (XRD), electron probe micro analysis (EPMA), transmission electron microscopy-electron energy-loss spectroscopy (TEM-EELS), scanning transmission electron microscopy-high-angle annular dark-field imaging (STEM-HAADF) and Ti–K edge X-ray absorption fine structure (XAFS). The color change was related to both precipitated TiN nanocrystals and residual titanium in the amorphous silica matrix. The TiN exhibited a goldish reflection and also plasmonic absorption from light blue to gray depending on the TiN crystallite size. The plasmonic absorption and resonance of nanocrystalline TiN will be useful similarly to that of gold in nanotechnology for various kinds of energy application.