Boccia game simulator: Serious game adapted for people with disabilities

Integration in the world of sport is one way for individuals with disabilities or motor disorders to feel more socially integrated, independent, and confident. Boccia is a Paralympic sport, which is increasingly getting more attention around the world. These facts have contributed to the objectives of this work. Including it in the serious games category enables to develop and rehabilitate the cognitive capabilities. The main focus was BC3 classification athletes (users with limited motor characteristics that require the use of an assistive device—a ramp, in this case). This paper describes a realistic Boccia game simulator adapted for people with disabilities that integrates a set of features that includes real physics and social features. These features can be used to enhance the interest of nonpractitioners of the sport and to improve the training conditions. The official Boccia regulation was added to the design of the simulator. The usability and approximation to the reality of the simulator were tested and validated based on the tests performed and data collected via a survey of users with no motor or psychological disorders. Realism and usability rating was almost excellent, and good results were achieved at the assessment of the game experience.     

Assessment of NOx emissions of the Scimitar engine at Mach 5 based on a thermodynamic cycle analysis

The Scimitar engine is a new advanced propulsion system designed to propel the aircraft A2 of the LAPCAT project. It is a hybrid system that utilizes the features of turbofan, ramjet and air-turborocket. Hydrogen and air are used as the fuel and oxidant, respectively, while helium is used to transfer heat from the hot incoming air to the hydrogen in the engine. In this study, we present a thermodynamic cycle analysis of the Scimitar engine for the assessment of NO_x emissions. The combustion of fuel is studied in detail with an equilibrium model taking into account various dissociation and formation reactions since high levels of temperatures are achieved in its combustion chamber. The NO_x emissions of the engine at Mach 5 and the effects of fuel and air flow rates, cruise speed and altitude on these emissions are presented by solving a nonlinear system of equations formed through our novel thermodynamic model. The results show that the NO emissions of the engine can be diminished significantly by decreasing air flow rate, cruise speed and altitude and by increasing the fuel flow rate. The variations of NO₂ emissions with these parameters are similar except the variation with altitude which has an inverse effect as compared to the variation of NO.     

Effect of excess hydrogen on hydrogen fueled internal combustion engine under full load

Detailed hydrogen-air chemical reaction mechanisms were coupled with three dimension grids of an experimental hydrogen fueled internal combustion engine (HICE) to establish a combustion model based on CONVERGE software. The influence of excess hydrogen coefficient on the combustion and emission characteristics of HICE under full load was studied based on the CFD model. Simulation results showed that excess hydrogen leaded to higher concentration of OH species in flame front, and quicker hydrogen-oxygen reaction and flame propagation speed, which in turn leaded to higher pressure and temperature in cylinder. The rise of pressure and temperature in turn contributed to the increase of indicate power but un-burned hydrogen leaded to decrease of efficiency. NOx, especially NO emissions decreased significantly with excess hydrogen under full load not only because increased of H concentration, and decreased of O and OH concentration, which leaded to reverse reaction of NO formation through thermal NO routes. Low excess hydrogen coefficient can achieve a good trade-off between power and emissions under full load.     

某船用柴油机排气管路流-固耦合计算与保温效果研究

对某船用柴油机排气管路的流动与传热过程开展流-固耦合仿真分析。结果表明:受排气管路结构影响，管内流动方向和流速发生变化，局部区域产生明显的回流现象；排气管路外表面温度分布差异较大，平均温度高达534 ℃。为达到柴油机安全设计要求，在排气管路外壁敷设保温材料。分析结果表明:气凝胶纳米材料的保温效果优于硅酸铝纤维材料，在相同的运行条件和使用要求下，气凝胶纳米材料的敷设厚度更薄。     

定距螺旋桨对船用主机外特性的要求分析

为解决定距螺旋桨与船用主机在船舶运行工况的机桨匹配问题,结合船舶系泊和航行试验的相关标准,分析和归纳船舶运行数据,将实船测试与船机桨匹配理论计算相结合,得出运输船和拖轮在常用工况及特殊工况下定距螺旋桨对主机外特性的定量要求,为配套不同细分市场时船用主机的优化和开发提供参考依据。     

Concept design of a novel reformer producing hydrogen for internal combustion engines using fuel decomposition method: Performance evaluation of coated monolith suitable for on-board applications

Hydrogen addition effectively reduces the fuel consumption of spark ignition engines. We propose a new on-board reformer that produces hydrogen at high concentrations and enables multi-mode operations. For the proposed reformer, we employ a catalytic fuel decomposition reaction via a commercial NiO–CaAl₂O₄ catalyst. We explore the physical and chemical aspects of the reforming process using a fixed bed micro-reactor operating at temperatures of 550–700 °C. During reduction, methane is decomposed to form hydrogen and carbon. Carbon formation is critical to hydrogen production, and free space for carbon growth is essential at low temperatures (≤600 °C). We define a new accumulated conversion ratio that quantitatively measures highly transient catalytic decomposition. The free space of the coated monolith clearly aided low-temperature decomposition with negligible pressure drop. The coated substrate is therefore suitable for on-board applications considering that our reformer concept also utilizes the catalytic fuel decomposition reaction.     

发动机尾气余热驱动的吸附式空调系统仿真与测试

针对在高太阳辐射地区，柴油车驾驶室内使用车载空调会增加车辆发动机的耗油量、降低柴油车经济效益的问题，搭建了一套由发动机尾气余热驱动的吸附式车载空调系统。系统由填充有氯化钙/氯化锰/硫化膨胀石墨复合吸附剂的吸附床、蒸发器、冷凝器、储液罐和阀门组成，使用氨作为制冷剂，利用车辆在行驶时接触到的自然风为吸附床冷却，在发动机尾气余热的驱动下，为驾驶室内提供连续的制冷效果。结合仿真和实验测试，对所设计系统的制冷性能进行了分析，仿真结果表明，系统最优循环时间为45 min，系统的理论平均制冷功率可达3.5 kW以上，系统COP处于0.2~0.25之间。实验结果表明，在230℃的尾气温度条件下，系统能产生3 kW的平均制冷量。在40℃环境温度条件下，系统在蒸发器进出口处的平均温差为6.5℃，平均制冷量为3.2 kW。     

基于人工神经网络的柴油机失火故障诊断

车载诊断系统在诊断失火故障时,采用基于曲轴段角加速度和阈值规则相结合的方法,该方法在内燃机高速轻载运行时诊断单缸完全失火工况存在一定的局限性。通过对比分析失火和正常工况下曲轴瞬时转速的幅频和相频特征,提取不同谐次的幅值和相位信息,结合人工神经网络作为故障模式识别工具,得到了一种改善方法。通过台架实验,对此改善方法进行了单缸完全失火、两缸完全失火和单缸一定程度失火的故障诊断测试。结果表明,在实验条件下该方法可以有效识别不同的失火模式,并可在单缸失火模式下实现失火程度判别。同时,该方法通过少量工况数据训练神经网络,即可实现一定转速范围内的失火诊断,可行性强,可用于发动机失火故障在线诊断。     

浅谈船用主机使用低硫燃油面临的挑战与应对措施

介绍了低硫燃油和传统的船用高硫燃油在化学成分和物理特性方面存在的诸多不同;指出:IMO2020限硫令对船舶运营带来了很大的挑战。基于两大主机制造商的相关文件和实际服务经验，归纳总结了船用主机使用低硫燃油运营时应注意的事项及应对措施，为船舶安全稳定运营提供参考。     

PA6B柴油机进排气阀断裂原因分析

针对PA6B柴油机进排气阀断裂故障,根据现场勘验情况并结合该柴油机当时的热工参数,建立相应的故障树;对制造质量、装配质量、配气定时、异物进入、热工参数等因素进行逐一排查。结果表明:导致PA6B柴油机进排气阀断裂的原因为喷油器制造质量存在问题。