Birds of prey: identifying lexical irregularities in spam on Twitter

Wireless Networks - The advent of spam on social media platforms has lead to a number of problems not only for social media users but also for researchers mining social media data. While there has...     

Moderate temperature sintering of BaZr0.8Y0.2O3-δ protonic ceramics by A novel cold sintering pretreatment

The state-of-the-art protonic ceramic conductor BaZr_0.8Y_0.2O_3-δ (BZY20) requires an extremely high sintering temperature (≥1700 °C) to achieve the desired relative density and microstructure necessary to function as a proton conducting electrolyte. In this work, we developed a cold sintering pretreatment assisted moderate-temperature sintering method for the fabrication of high-quality pure BZY20 pellets. BZY20 pellets with high relative density of ~94% were fabricated with a final sintering temperature of 1500 °C (200 °C lower than the traditional sintering temperature). A comparison with BZY20 control samples indicated that the proper amount of BaCO₃ introduced on the BZY20 particle surface and the high green density achieved by cold sintering pretreatment were the main drivers for lowering the sintering temperature. The electrical conductivity measurement by electrochemical impedance spectroscopy showed that the as-prepared BZY20 pellets have a proton conductivity comparable to the state-of-the-art values. The cold sintering pretreatment outlined in this work has the potential to lower the sintering temperatures for similar types of protonic ceramic materials under consideration for a wide range of energy conversion and storage applications.     

Analysis of ZTE MRI application to sandstone and carbonate

Microtomography (μCT) and nuclear magnetic resonance (NMR) have been used to characterize porous media for decades. Magnetic resonance imaging (MRI) enables direct visualization of pore architecture and many pulse sequences exist. In this work, we tested the MRI pulse sequence Zero Echo Time (ZTE) to study sandstone and carbonate for its ability to address short relaxation times. We aimed at resolving two fluid conduit scales, that is, pores and fractures. In this research, we study tighter porous systems than those previously reported using ZTE. Additionally, pore cluster analysis (PCA), combined with ZTE, can be used to analyze pore-fracture connectivity of relatively large core plugs. We show that ZTE can resolve two-scale pore systems simultaneously, that is, fractures and pores. By combining time-domain NMR pore-size analysis and PCA, we show that careful selection of resolution is necessary to understand transport in porous media.     

Influence of bearing ball recirculation on error motions of linear axes

For positioning systems utilizing linear guides and trucks with recirculating balls, a method is presented that uses the measured total error motions and the measured phase of ball loops within trucks to determine the influence of each ball loop on the error motions. The influence of ball recirculation on the error motions is estimated a priori via a least-squares solution based on data collected from a multitude of motion tests in which varying phases were measured by sensors integrated into the trucks. This method enables real-time estimation of performance degradations and identification of their sources.     

Confounding Roles of ER Stress and the Unfolded Protein Response in Skeletal Muscle Atrophy

Skeletal muscle is an essential organ, responsible for many physiological functions such as breathing, locomotion, postural maintenance, thermoregulation, and metabolism. Interestingly, skeletal muscle is a highly plastic tissue, capable of adapting to anabolic and catabolic stimuli. Skeletal muscle contains a specialized smooth endoplasmic reticulum (ER), known as the sarcoplasmic reticulum, composed of an extensive network of tubules. In addition to the role of folding and trafficking proteins within the cell, this specialized organelle is responsible for the regulated release of calcium ions (Ca²⁺) into the cytoplasm to trigger a muscle contraction. Under various stimuli, such as exercise, hypoxia, imbalances in calcium levels, ER homeostasis is disturbed and the amount of misfolded and/or unfolded proteins accumulates in the ER. This accumulation of misfolded/unfolded protein causes ER stress and leads to the activation of the unfolded protein response (UPR). Interestingly, the role of the UPR in skeletal muscle has only just begun to be elucidated. Accumulating evidence suggests that ER stress and UPR markers are drastically induced in various catabolic stimuli including cachexia, denervation, nutrient deprivation, aging, and disease. Evidence indicates some of these molecules appear to be aiding the skeletal muscle in regaining homeostasis whereas others demonstrate the ability to drive the atrophy. Continued investigations into the individual molecules of this complex pathway are necessary to fully understand the mechanisms.     

An Inquiry into the Nature and Causes of Nigeria’s Rapid Urban Transition

Owing to the dramatic pace and scale of its transformation, Nigeria is considered Africa’s next urban giant. Between 1960 and 2010, Nigeria added approximately 62.5 million inhabitants to its urban population, with forecasts to 2050 projecting an additional 226 million. As Nigeria forges ahead into the next chapter of its urban transition, there is an unmet need to take stock of past experiences, identify trends, and speculate on future growth trajectories. Taking advantage of recently available datasets from the United Nations and the Africapolis Project, this paper launches an inquiry into the nature and causes of Nigeria’s rapid urban transition between 1960 and 2010. It disaggregates urbanization into its individual components of urban growth and calculates their contributions to the overall urban increment. Several notable findings are highlighted. Nigeria, which is considered a late urbanizer, is currently in the accelerated stage of its urban transition and is projected to enter the terminal stage by 2030. Urban natural population increase has been the dominant component of urban growth in the post-colonial period and will likely continue to be so in the immediate future. Despite this, policies aimed at stemming rural to urban migration appear to have been the preferred mechanism for lessening the pressures posed by the contemporary urban transition, suggesting a potential policy mismatch.     

Biocatalytic electrode improvement strategies in microbial fuel cell systems

Microbial fuel cells (MFCs) produce electricity as a result of the microbial metabolism of organic substrates, hence they represent a sustainable approach for energy production and waste treatment. If the technology is to be implemented in industry, low cost and sustainable bioelectrodes must be developed to increase power output, increase waste treatment capacity, and improve service intervals. Although the current application of abiotic electrode catalysts, such as platinum and electrode binders such as Nafion leads to greater MFC performance, their use is cost prohibitive. Novel bioelectrodes which use cost effective and sustainable materials are being developed. These electrodes are developed with the intention to reduce start-up time, reduce costs, extend life-span and improve core MFC performance metrics (i.e. power density, current density, chemical oxygen demand (COD) reduction and Coulombic efficiency (CE)). Comparison of different MFC systems is not an easy task. This is due to variations in MFC design, construction, operation, and different inocula (in the case of mixed-culture MFCs). This high intra-system variability should be considered when assessing MFC data, operation and performance. This review article examines the major issues surrounding bioanode and biocathode improvement in different MFC systems, with the ultimate goal of streamlining and standardising improvement processes. © 2018 Society of Chemical Industry     

Revealing Nanomechanical Domains and Their Transient Behavior in Mixed-Halide Perovskite Films

Halide perovskites are a versatile class of semiconductors employed for high performance emerging optoelectronic devices, including flexoelectric systems, yet the influence of their ionic nature on their mechanical behavior is still to be understood. Here, a combination of atomic-force, optical, and compositional X-ray microscopy techniques is employed to shed light on the mechanical properties of halide perovskite films at the nanoscale. Mechanical domains within and between morphological grains, enclosed by mechanical boundaries of higher Young's Modulus (YM) than the bulk parent material, are revealed. These mechanical boundaries are associated with the presence of bromide-rich clusters as visualized by nano-X-ray fluorescence mapping. Stiffer regions are specifically selectively modified upon light soaking the sample, resulting in an overall homogenization of the mechanical properties toward the bulk YM. This behavior is attributed to light-induced ion migration processes that homogenize the local chemical distribution, which is accompanied by photobrightening of the photoluminescence within the same region. This work highlights critical links between mechanical, chemical, and optoelectronic characteristics in this family of perovskites, and demonstrates the potential of combinational imaging studies to understand and design halide perovskite films for emerging applications such as photoflexoelectricity.     

Assembly and Characterization of Biocompatible Coenzyme Q10-Enriched Lipid Nanoparticles

Coenzyme Q₁₀ (CoQ₁₀) is a strongly hydrophobic lipid that functions in the electron transport chain and as an antioxidant. CoQ₁₀ was conferred with aqueous solubility by incorporation into nanoparticles containing phosphatidylcholine (PtdCho) and apolipoprotein (apo) A-I. These particles, termed CoQ₁₀ nanodisks (ND), contain 1.0 mg CoQ₁₀/5 mg PtdCho/2 mg apoA-I (97% CoQ₁₀ solubilization efficiency). UV/Vis absorbance spectroscopy of CoQ₁₀ ND revealed a characteristic absorbance peak centered at 275 nm. Incorporation of CoQ₁₀ into ND resulted in quenching of apoA-I tryptophan fluorescence emission. Gel filtration chromatography of CoQ₁₀ ND gave rise to a single major absorbance peak and HPLC of material extracted from this peak confirmed the presence of CoQ₁₀. Incubation of cultured cells with CoQ₁₀ ND, but not empty ND, resulted in a significant increase in the CoQ₁₀ content of mitochondria as well as enhanced oxidative phosphorylation, as observed by a ~24% increase in maximal oxygen consumption rate. Collectively, a facile method to solubilize significant quantities of CoQ₁₀ in lipid nanoparticles has been developed. The availability of CoQ₁₀ ND provides a novel means to investigate biochemical aspects of CoQ₁₀ uptake by cells and/or administer it to subjects deficient in this key lipid as a result of inborn errors of metabolism, statin therapy, or otherwise.     

Molecularly‐Engineered, 4D‐Printed Liquid Crystal Elastomer Actuators

Three‐dimensional structures that undergo reversible shape changes in response to mild stimuli enable a wide range of smart devices, such as soft robots or implantable medical devices. Herein, a dual thiol‐ene reaction scheme is used to synthesize a class of liquid crystal (LC) elastomers that can be 3D printed into complex shapes and subsequently undergo controlled shape change. Through controlling the phase transition temperature of polymerizable LC inks, morphing 3D structures with tunable actuation temperature (28 ± 2 to 105 ± 1 °C) are fabricated. Finally, multiple LC inks are 3D printed into single structures to allow for the production of untethered, thermo‐responsive structures that sequentially and reversibly undergo multiple shape changes.