基于碳纳米管的超级电容器聚吡咯电极复合方法

For the defect that the mechanical properties of polypyrrole supercapacitors decrease with charge and discharge cycles, and the cycle stability is poor, a compound method of polypyrrole electrode for supercapacitors based on multi-walled carbon nanotubes is proposed. The structure of the formed polypyrrole coated multi-walled carbon nanotubes effectively increase the specific surface area of the electrode material, the utilization rate of the active material and the electrical conductivity, improve the rapid charge and discharge performance of the electrode material, and greatly improve cyclic stability of polypyrrole. The composite electrode materi- al of polypyrrole and functionalized multi-walled carbon nanotubes for supercapacitors is prepared by pulse current deposition meth- od. It is scanned at a scanning rate of 1000mV?s -1 in a 3mol?L -1 potassium chloride electrolyte, after 100,000-cycle, the capacity on- ly declines by 16%.     

基于NB分类器重访概率预测的Web缓存替换策略

Web缓存是用来解决网络访问延迟和网络拥塞问题，缓存替换策略直接影响缓存的命中率。为此，提出一种朴素贝叶斯（NB）分类器重访概率预测的Web缓存替换策略；根据用户之前访问日志，通过分区操作提取多项特征来表示每次访问的对象，并构建特征数据集；训练NB分类器，用来确定缓存中对象被再次访问的概率，为对象分配权重；结合LRU策略来合理删除一些对象。仿真结果表明，提出的策略在保证较高命中率的同时有效降低了执行时间。     

结合MNF变换和Canny算子的遥感影像变化检测

针对大面积区域的多时相遥感影像变化检测的需求，提出了一种基于最小噪声分离（MNF）的Canny边缘检测提取影像变化信息的检测方法。对多时相影像采用多种变换组合成具有多维波段信息的影像，采用最小噪声分离法分离噪声并得到单波段差异图，通过Canny边缘检测法计算梯度幅值，采用高低双阈值法细化边缘，从而提取差异图变化边缘，有效突出了变化信息。以1995年和2003年加扎勒河的两期遥感影像为例，利用两时相影像进行土地覆被变化检测。实验结果表明，该方法适用于监测大面积区域内地物的突变情况。在数据基础上进行最小噪声分离可以有效解决传统Canny边缘检测提取边缘时造成的伪边缘现象，同时采用高低双阈值法有效去除伪边缘点，从而获得更加精确、直观的变化检测效果，在自然地理变化监测、地理国情灾害监测等有很好的应用价值。     

高斯混合模型结合加权似然的目标跟踪算法

鉴于高斯混合模型对背景变化快时无法精确检测出目标和目标跟踪的适应性差等瑕疵，提出了基于加权似然跟踪器来改进高斯混合模型实现运动目标跟踪算法。主要引入了自适应高斯混合模型来实时检测运动目标，然后空间加权似然来进行视频中的目标定位，引入加权似然期望值来改进高斯混合模型处理视频中的多尺度、多角度变化的目标跟踪不精准问题。通过VOT 2014 dataset对比实验结果表明提出的基于加权似然跟踪（Weighted Likelihood Tracking，WLT）和改进高斯混合模型（Improved Gaussian Mixture Model，IGMM）的目标跟踪算法较传统高斯混合模型跟踪算法在跟踪的精度有较大提高。在应对多尺度、多角度变化的目标跟踪表现出了较大的优势。     

Parameter identification for Wiener-finite impulse response system with output data of missing completely at random mechanism and time delay

In this paper, the parameter estimation issue of Wiener system with random time delay and missing output data is studied. The linear part of Wiener system is described by Finite Impulse Response (FIR) model. The mathematical formula of the Expectation Maximum algorithm to identify Wiener-FIR system that contains the random time delay and the nonlinear output data in missing completely at random mechanism is derived, which is never considered before. To obtain the unmeasurable intermediate variable in Wiener-FIR system, the idea of auxiliary model is adopted. The time delay and system parameters can be estimated simultaneously by this method. Numerical example and the identification of water tank system example are carried out, the effectiveness of the algorithm is proved.     

Fabrication method,dielectric properties,and electromagnetic absorption performance of high alumina fly ash-based ceramic composites

Mullite-Al₂O₃-SiC composites were in-situ synthesized through carbothermal reduction reaction of fly ash (FA) with a high alumina content and activated carbon (AC). The effects of sintering temperature, holding time, and amount of AC on the β-SiC yield, microstructure, dielectric properties, and electromagnetic (EM) absorption performance of the composites in the 2–18 GHz frequency range were studied. The results show that increasing the AC improves the porosities of the composites, with the highest porosity of 56.17% observed. The β-SiC yield varies considerably as the sintering parameters were altered, with a maximum yield of 23% achieved under conditions of 12 wt% AC, 1400 °C sintering temperature, and 3 h holding time. With a thickness of 3.5 mm, this composite has excellent EM absorption performance, exhibiting a minimum reflection loss (RL_min) of -51.55 dB at 7.60 GHz. Significantly, the maximum effective absorption bandwidth (EAB) reaches 3.39 GHz when the thickness is 3.0 mm. These results demonstrate that the composite prepared under ideal conditions can absorb 99.99% of the waves passing through it. Because of the interfacial polarization, conductive loss, and impedance matching of the heterostructure, the synthesized mullite-Al₂O₃-SiC composites with densities ranging from 1.43 g/cm³ to 1.62 g/cm³ demonstrate outstanding EM attenuation capabilities. Therefore, this study presents a remarkable way of utilizing fly ash to fabricate inexpensive, functional ceramic materials for EM absorption applications.     

液晶材料中间体-4-(反式,反式-4-丙基双环己基)苯乙酮的合成

液晶材料目前的制备方法复杂,市场上成熟的原料合成路线基本没有。要制备性能优异的、使用广泛的液晶材料需要多步反应。以市场中常见的4-(反式,反式-4-丙基双环己基)苯为原料,经傅克酰基化反应得到目标产物。主要考察了4-(反式,反式-4-丙基双环己基)苯乙酮的合成条件,如酰基化反应溶剂、酰基化反应温度、酰基化反应时间及水解反应溶剂四个条件的影响,确定了合成反应的最佳条件。并采用红外光谱和核磁共振方法确证了目标产物。     

互叶白千层花、果与叶挥发油成分的对比分析

以水蒸气蒸馏法提取互叶白千层花、果、叶三个不同部位的挥发油,采用气相色谱法、气相色谱-质谱联用法分别鉴定了花、果和叶中挥发油的化学成分,并比较互叶白千层不同部位挥发油的主要化学成分及含量差异。分析结果可为互叶白千层花、果研究提供试验依据。     

气相色谱-质谱法测定化妆品中13种硝基苯类化合物

建立了水剂、粉剂、膏霜类、唇膏唇彩类化妆品中13种硝基苯类化合物的气相色谱-质谱（GC-MS）测定方法。水剂和粉剂类化妆品采用溶剂提取,浓缩后测定;膏霜类和唇膏唇彩类化妆品采用溶剂提取,佛罗里硅土固相萃取柱净化后测定。样液经OV-225（30m×0.25mm×0.25μm）毛细管色谱柱分离,GC-MS的选择离子监测（SIM）模式检测,以保留时间和特征离子比值定性,内标法定量。结果显示,13种硝基苯类化合物在0.1-5.0mg/L浓度范围内线性关系良好,方法检出限（S/N=3）在0.02-0.85mg/kg之间,3个添加水平的平均回收率在81.2%-11.3%之间,相对标准偏差（RSD,n=6）为4.5%-12.1%。     

环氧固化剂硫脲改性四乙烯五胺的合成及性能研究

用硫脲改性四乙烯五胺合成了环氧树脂固化剂。通过测量初凝时间和接触角,讨论了反应时间、合成温度和单体投料比对固化剂性能的影响。通过热效应法考查了固化剂与环氧树脂的最佳配比。实验结果表明,反应时间为3 h,反应温度为130℃,四乙烯五胺与硫脲的质量比为1.4∶1时,合成的固化剂较好。当m固化剂∶m环氧=1∶4时,胶粘剂能在-5℃/8 d内固化,有效提高固化体系在低温下的固化能力。