沁水盆地赵庄矿3号煤层地面煤层气抽采低产原因分析

在对沁水盆地赵庄矿煤层气开发地质、煤层气生产井资料深入研究的基础上，分析、总结了区内煤层气直井低产原因，并据此提出了区内地面抽采后续开发方向。研究认为:3号煤层气含量偏低、含气饱和度低、临储比低，致使排采阶段气含量可降幅度低，是其低产的宏观表征；3号煤储层不匹配孔级，较差连通性，即微、小孔为主，中孔次之，大孔不发育，微裂隙连通性差，致使扩散缓慢、影响储层改造和抽采效果，是其低产的微观表征；3号煤层远高于顶底板塑性及相近的水平应力，进一步造成改造缝长受限，泄流面积不足。因此，建议区内后续地面抽采方式应以增大泄流面积开发方式为主。     

Toxoplasma gondii GRA9 Regulates the Activation of NLRP3 Inflammasome to Exert Anti-Septic Effects in Mice

Dense granule proteins (GRAs) are essential components in Toxoplasma gondii, which are suggested to be promising serodiagnostic markers in toxoplasmosis. In this study, we investigated the function of GRA9 in host response and the associated regulatory mechanism, which were unknown. We found that GRA9 interacts with NLR family pyrin domain containing 3 (NLRP3) involved in inflammation by forming the NLRP3 inflammasome. The C-terminal of GRA9 (GRA9C) is essential for GRA9–NLRP3 interaction by disrupting the NLRP3 inflammasome through blocking the binding of apoptotic speck-containing (ASC)-NLRP3. Notably, Q200 of GRA9C is essential for the interaction of NLRP3 and blocking the conjugation of ASC. Recombinant GRA9C (rGRA9C) showed an anti-inflammatory effect and the elimination of bacteria by converting M1 to M2 macrophages. In vivo, rGRA9C increased the anti-inflammatory and bactericidal effects and subsequent anti-septic activity in CLP- and E. coli- or P. aeruginosa-induced sepsis model mice by increasing M2 polarization. Taken together, our findings defined a role of T. gondii GRA9 associated with NLRP3 in host macrophages, suggesting its potential as a new candidate therapeutic agent for sepsis.     

Comparison of ignition,injection and micro - Explosion characteristics of RP-3/ ethanol and biodiesel / ethanol mixed drops

The ignition, injection, and micro-explosion characteristics of aviation fuel (RP-3)/ethanol mixed droplets and biodiesel/ethanol mixed droplets at different proportions under high temperature conditions (420 °C) were compared using an experimental setup. A device for measuring small droplet volumes was designed using an infusion set and different types of needles, and a corresponding equation was established. Mixed droplets suspended on high-temperature resistance nichrome wire with a diameter of 0.2 mm were heated by sending them to a position approximately 2 mm from the forklift preheating plug using a moving rail. SLR and high-speed cameras were used to observe the flame structure as well as the injection and micro-explosion of the mixed droplets during combustion, respectively. Expansion, injection, and micro-explosion were observed in the biodiesel/ethanol mixed droplet experiments when the biodiesel content was 60%. Although the micro-explosion of mixed droplets of aviation fuel/ethanol was not observed, expansion and ejection of the droplets were observed. Image Pro-plus software was used to calculate the diameters at different times in the combustion cycle of the droplets. Through this analysis, the occurrence of micro-explosion was described, and a model for the calculation of micro-explosion strength was established.     

结合注意力的3D卷积网络脑胶质瘤分割算法

为了提升脑胶质瘤分割精度，提出一种结合注意力机制的3D卷积神经网络算法。输入3个不同尺度的图像块，经过9个卷积层和1个分类层后得到3个不同的分类结果，将分类结果与注意力学习到的权重相乘并逐体素相加得到输出。此外该算法采用了一种混合Dice损失函数与Focal损失函数的超参数损失函数。实验表明，该算法的Dice系数在整体区域、核心区域以及增强区域分别达到了95.31%、80.12%、82.25%。与已有的一种脑胶质瘤分割算法deepmedic相比，整体区域、核心区域以及增强区域的Dice系数分别提升了3%、2%、6%。在脑胶质瘤分割方面，具有重要的临床意义。     

面向噪声丢包感知的无线网络拥塞算法

针对无线网络链路干扰大、误码率高等特点，以及TCP Westwood算法（TCPW）存在估算带宽时过度依赖包的反馈，缺乏区分传输过程中丢包类型的缺点等问题，提出一种TCPW拥塞控制优化算法--TCPW-F。该算法利用发送速率等构建拥塞因子[F]作为判断丢包类型的依据，同时对判定发生噪声丢包时的拥塞窗口进一步调整，避免噪声丢包引起的窗口下降，提高该情况下窗口的发送效率。仿真结果表明，TCPW-F算法在时延性能方面表现更优，单位时间抖动趋于稳定的速度更快。在同一信道带宽下增大包生成速率，改进算法的实时吞吐量明显高于原算法，具备一定的噪声丢包感知能力，无线网络的TCP传输质量获得较大改善。     

Systematic convergence of nonlinear stochastic estimators on the Special Orthogonal Group SO(3)

This paper introduces two novel nonlinear stochastic attitude estimators developed on the Special Orthogonal Group with the tracking error of the normalized Euclidean distance meeting predefined transient and steady‐state characteristics. The tracking error is confined to initially start within a predetermined large set such that the transient performance is guaranteed to obey dynamically reducing boundaries and decrease smoothly and asymptotically to the origin in probability from almost any initial condition. The proposed estimators produce accurate attitude estimates with remarkable convergence properties using measurements obtained from low‐cost inertial measurement units. The estimators proposed in continuous form are complemented by their discrete versions for the implementation purposes. The simulation results illustrate the effectiveness and robustness of the proposed estimators against uncertain measurements and large initialization error, whether in continuous or discrete form.     

Computer‐aided design methodology for linearity enhancement of multiwatt GaN HEMT amplifiers using multiple parallel devices

This article presents a design methodology for linearizing GaN HEMT amplifiers based on splitting a large FET into multiple parallel FETs with same total gate periphery and by biasing them individually. By varying the biases, the magnitude and the phase of the IMD3 components at the output of FET changes. A detailed simulation methodology using commercial microwave CAD software is presented. Simulation results show that by biasing one device in Class AB and other(s) in deep Class AB mode, IMD3 components of parallel FETs can be made out of phase to each other leading to cancellation and improvement in linearity. Three prototype circuits were simulated using (a) a single 5 mm FET (1 × 5 mm), (b) two parallel 2.5 mm FETs (2 × 2.5 mm), and (c) four parallel 1.25 mm FETs (4 × 1.25 mm), for a total gate periphery of 5 mm, over the frequency range of 0.8 to 1.0 GHz. IMD3 improvement up to 20 dBc was achieved with the 4 × 1.25 mm circuit when the FET biases were optimized. Measurement results show improvement in linearity up to 20 dBc for 4 × 1.25 mm circuit. The proposed method improves linearity without a substantial penalty on the power consumption and is straightforward to implement.     

Modeling and design of 3-D MPPT for ultra low power RF energy harvesters

Radio-Frequency (RF) energy harvesting must cope with the limited availability and high variability of the energy source. In this paper, the modeling of an RF harvester for ultra low power environments is presented. A mathematical model based on theoretical analysis is developed. The model demonstrates that the maximum transferred power point is located in a three-dimensional space defined by the input capacitance, the output voltage, and the load resistance of the rectifier circuit. Moreover, the mathematical model returns results in substantial agreement with the SPICE simulation results, while guaranteeing a remarkable reduction of the required computation time. Furthermore, the paper reports the implementation of a mixed signal system for the 3-D MPPT, to be embedded in an RF harvester, in a 65 nm CMOS technology. The circuit exhibits a simulated power consumption lower than 100 nW, making this solution suitable for ultra low power harvesting.     

The alginate fermentation strain Pantoea sp. F16-PCAi-T3P21 and ethanol production

Bio-ethanol production from algae is a promising way to help solve the energy problem. Alginate is a major component of algae, but it cannot be utilized by existing ethanol fermentation microorganisms. In order to improve the utilization rate of brown algae, high alginate fermentation strains should be obtained. In this research, strains for algae fermentation were got from several experiments. The ethanol yield of strain A was the highest, which was 0.095 g/g (ethanol to alginate). The identification of strain A was carried out and it was 99% identical to Pantoea sp. F16-PCAi-T3P21. Fermentation experiments with different substrates were carried out, such as laminaran, mannitol, L. japonica and acid hydrolysate of L. japonica, and the ethanol yield rate of L. japonica acid hydrolysate was the highest, which reached 0.17 g/g ethanol to L. japonica. It showed that strain A can converse alginate to ethanol in a relatively high yield rate, and might be a promising strain with L. japonica as the substrate, we believe more research should be carried out on this strain.