龙滩坝8#采场地压监测与结果分析

为掌握龙滩坝8#采场矿体在开采过程中地压的变化规律，在结合现场实际情况的同时，根据开挖揭露的地质条件，采用钻孔应力计、锚杆应力计、收敛计、多点位移计和声发射对采场矿柱、顶板及巷道变形情况进行监测，得到回采过程中矿柱、顶板、巷道的受力状况。掌握采场地压的变化规律，为矿体的开采设计提供参考。     

超快冷技术在唐钢中厚板生产线上的应用

介绍了基于超快速冷却的新一代TMCP工艺的基本思想以及中厚板超快冷装置的技术特点,即高冷却强度、高冷却均匀性和灵活的控制方式。结合唐山中厚板材有限公司的以超快速冷却为核心的新一代TMCP工艺在合金减量化Q345、高品质Q420qD、工艺减量型Q550D等钢种的工业实践,表明该工艺较传统的TMCP工艺在减少合金元素含量、提高钢板强度和冲击韧性等方面具有明显的优势。     

12R22.5全钢轮胎成型机扇形块形状仿真优化

针对12R22.5全钢轮胎出现的轮胎胎圈部位内凹和胎体帘线抽出等缺陷，利用有限元分析技术对成型机扇形块轮廓形状进行优化。通过扇形块参数调整使其横向压紧力、垂向压紧力和胎圈部位面积达到优化目标，使用优化后的扇形块提高了成型胎坯工艺质量和稳定性，同时延长了成型胶囊使用寿命。     

Anchoring single Pt atoms on hollow Ag3VO4 spheres for improved activity towards photocatalytic H2 evolution reaction

The high cost of noble metal catalysts has been a great bottleneck for the catalyst industry. Using the noble metal at a single-atom level for catalytic applications could dramatically decrease the cost. The impacts of single Pt atoms on the photocatalytic performance of Ag₃VO₄ have been investigated and reported. In this report, single Pt atoms were anchored on the surface of Ag₃VO₄ (AVO) as a cocatalyst, and the resultant composite photocatalyst has been studied for photocatalytic H₂ production from water driven by visible light. The as-prepared AVO particles are hollow nanospheres in the monoclinic phase with a bandgap of 2.20 eV. The light absorption edge of AVO/Pt is slightly red-shifted compared to that of the pristine AVO, indicating more visible light absorption of AVO/Pt. The XPS peaks of Ag, V, and Pt exhibit a significant shift after AVO and Pt get into contact, suggesting the strong interaction between the surface Ag and V atoms, and single Pt atoms. After 3-h illumination, the photocatalytic H₂ evolution amount from AVO/Pt is improved up to 1400 μmol, which is 2.8 times that on the bare AVO. Such efficient photocatalytic H₂ evolution on AVO/Pt is still maintained after five reaction cycles. The better photocatalytic performance of AVO/Pt has been attributed to the more efficient visible light utilization and the lower interfacial charge transfer resistance, as demonstrated in the DRS and EIS spectra. The presence of the surface Pt atoms also leads to a higher amount of reactive radicals, which could efficiently promote the surface redox reactions.     

改性防护蜡对轮胎胎侧胶性能的影响

研究改性防护蜡对轮胎胎侧胶性能的影响。结果表明,与传统防护蜡相比,改性防护蜡异构烷烃质量分数较小,结晶尺寸小且致密程度高。改性防护蜡可在不影响胎侧胶硫化特性和物理性能的前提下,大幅提高胎侧胶抗喷霜性能,保证轮胎表面不受臭氧侵蚀,在防止裂纹产生的同时明显改善成品轮胎外观。     

刚果(金)某氧化铜精矿还原熔炼渣型优化实验

刚果（金）某地区经浮选得到的氧化铜精矿，含铜28.39 %，矿石中的铜主要赋存在孔雀石中。在实际生产中，采用鼓风炉还原熔炼处理该类氧化铜精矿，存在熔炼温度较高、氧化钙添加量大、熔炼渣含铜偏高的问题，为此，进行渣型优化实验研究，考察了还原焦比、CaO:SiO2比和氧化亚铁加入量对氧化铜精矿还原熔炼的影响。结果表明，在还原熔炼时，焦比主要影响粗铜产率和铜回收率，CaO:SiO2主要影响渣中铜含量，熔炼温度是影响渣黏度的主要因素。在还原焦比为5 %，选择酸性熔炼渣型，渣中CaO:SiO2为0.4-0.55，FeO:SiO2为0.13条件下，渣含铜可降至0.4 %以下，铜回收率在98 %以上。     

往复式活塞压缩机中间喷液制冷系统的(火用)分析

通过对往复式活塞压缩机进行改造，在单级活塞压缩系统的基础上搭建了一种中间喷液冷却的准两级压缩系统并在蒸发温度为-20 ℃的工况下进行实验测量，根据实验数据对单级活塞压缩系统和新型中间喷液冷却活塞压缩系统的COP、〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失和〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗效率进行计算。结果表明：加入中间喷液冷却系统后，系统的COP由1.27提升至1.36，单位制冷量由155.1 kJ/kg提升至176.7 kJ/kg；单级活塞压缩系统〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失较大的部分是压缩机和膨胀阀，分别占压缩机输入〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗的16.2%和14.8%，加入中间喷液冷却系统后压缩机部分的〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损失明显降低，仅占压缩机输入〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗的3.6%，冷凝器及膨胀阀的〖HT5”，7”〗火〖KG-*3〗用〖HT5”〗损比也有所下降。     

3＋9×0.175NT钢丝帘线在轻型载重子午线轮胎胎体中的应用

研究3+9×0.175NT钢丝帘线在轻型载重子午线轮胎胎体中的应用。结果表明,采用1层压延密度为83根·dm-1的3+9×0.175NT钢丝帘布替代3层压延密度为110根·dm^-1的1670dtex/2-28EPI聚酯帘布用于6.50R1610PR轻型载重子午线轮胎胎体,压延工艺良好,成型和硫化过程正常。成品轮胎质量减小,成本降低,充气外缘尺寸、强度性能、耐久性能和高速性能均符合国家标准或企业标准要求。     

Experimental verification of discrete models for combustion of microheterogeneous compositions forming condensed combustion products (Review)

Combustion, Explosion, and Shock Waves - This paper presents an analytical review of modern quasihomogeneous and discrete models of gasless combustion. Particular attention is given to experiments...