Real time power management strategy for fuel cell hybrid electric bus based on Lyapunov stability theorem

The fuel cell/battery durability and hybrid system stability are major considerations for the power management of fuel cell hybrid electric bus (FCHEB) operating on complicated driving conditions. In this paper, a real time nonlinear adaptive control (NAC) with stability analyze is formulated for power management of FCHEB. Firstly, the mathematical model of hybrid power system is analyzed, which is established for control-oriented design. Furthermore, the NAC-based strategy with quadratic Lyapunov function is set up to guarantee the stability of closed-loop power system, and the power split between fuel cell and battery is controlled with the durability consideration. Finally, two real-time power management strategies, state machine control (SMC) and fuzzy logic control (FLC), are implemented to evaluate the performance of NAC-based strategy, and the simulation results suggest that the guaranteed stability of NAC-based strategy can efficiently prolong fuel cell/battery lifespan and provide better fuel consumption economy for FCHEB.     

基于CAN总线的多通道开度阀控制系统的设计

针对现有电动阀门控制系统可嵌入性差的问题，设计了一种基于CAN总线的网络化、多通道、开度型阀门嵌入式控制系统。其中，上位机主要用于下达各阀门开度等控制指令并同时监测其工作状态，而下位机采用双MCU架构，主MCU用于控制各阀门的开度大小，从MCU负责采集开度反馈电流以实现闭环控制。下位机采用了模糊PID算法进行控制参数的动态整定，可满足阀门在不同工况下的控制精度要求，并通过OLED屏显示各通道阀门的实际开度值。实验表明,该控制系统运行稳定，能实现对多通道开度阀的精准控制，控制精度在0.6%以内，并支持远程上位机控制和现地控制等多种工作模式。     

基于IEC 60870-5-104协议的调度命令发送方法研究

对IEC 60870-5-104协议的调度命令进行了研究，提出了一种基于现有IEC 60870-5-104协议的调度命令发送新方法。此技术充分利用了IEC 60870-5-104协议的文件发送功能，通过远程终端单元（RTU）向电厂发送包含调度命令的文本文件。考虑到调度命令在电力系统和电力市场结算系统安全方面的重要性，将该方法应用在电网调度自动化 SCADA 系统中，可以实现交换数据的更高可用性。     

CNG-电混动公交车道路行驶工况与排放特性研究

CNG-电公交车以天然气作为发动机燃料,辅以电机共同驱动的混合动力车辆,车辆行驶速度低、启动频繁等特性,发动机实际运行工况与型式检验工况具有较大差异。为研究其实际行驶工况与排放特性,选取4辆国V排放标准的CNG-电混合动力公交车,往返于市区与城郊,使用PEMS(portable emission measurement system)实时收集车辆行驶及NO_X排放数据。结果表明,发动机运行工况集中于中低功率段,与型式检验工况差异较大,污染物排放集中于发动机切入车辆传动系统的临界车速附近。     

PLC控制在气力除灰系统的应用

本文根据攀钢发电厂除灰系统的控制性能要求,采用“上位机+PLC”组成的控制系统实现对除灰系统的控制.该控制系统具有抗干扰能力强、可靠性高、操作简便、扩展方便等优点.     

Electroactive polythiophene/polystyrene bottlebrushes as morphology compatibilizers in photovoltaic systems

Poly(3‐thiophene ethanol) (P3ThEt)‐graft‐polystyrene (PSt) bottlebrushes were synthesized and applied in active layers of poly(3‐hexylthiophene) (P3HT):phenyl‐C71‐butyric acid methyl ester (PC71BM) solar cells as morphology compatibilizers. In the presence of 15 wt% of P3ThEt‐graft‐PSt bottlebrush compatibilizers, the P3HT crystallite dimensions (D₍₁₀₀₎ = 45.67 nm and D₍₀₂₀₎ = 30.12 nm) and R_mean (38.96 nm) of PCBM clusters were the largest and the layer spacings were all the smallest (d₍₁₀₀₎ = 1.054 nm, d₍₀₂₀₎ = 0.301 nm and d_(PCBM) = 0.406 nm). These dimensional properties led to better hole (1.9 × 10^?3 cm² V^?1 s^?1) and electron (1.2 × 10^?2 cm² V^?1 s^?1) mobilities. The content of bottlebrushes was optimized at 15 wt%, and thereby the best photovoltaic results including the maximum cell efficiency of 5.37% were obtained for this turning point (12.75 mA cm^?2, 61%, 0.69 V). On exceeding the optimum weight percentage, all photovoltaic parameters decreased markedly and reached even less than that of pristine devices (1.92% versus 2.24%). After an optimum weight percentage of compatibilizers, further enhancement in bottlebrush content in active layers saturated and finally oversaturated the system and, consequently, the cell parameters significantly decreased. Accumulation of bottlebrushes in interfaces and donor/acceptor phases ruined the system function even with large and packed P3HT crystallites and PC71BM clusters. © 2019 Society of Chemical Industry     

Three-phase four-wire shunt active power filter based on the SOGI filter and Lyapunov function for DC bus control

The three-phase four-wire shunt active power filter (SAPF) was developed to suppress the harmonic currents generated by nonlinear loads, and for the compensation of unbalanced nonlinear load currents, reactive power, and the harmonic neutral current. In this work, we consider instantaneous reactive power theory (PQ theory) for reference current identification based on the following two algorithms: the classic low-pass filter (LPF) and the second-order generalized integrator (SOGI) filter. Furthermore, since an important process in SAPF control is the regulation of the DC bus voltage at the capacitor, a new controller based on the Lyapunov function is also proposed. A complete simulation of the resultant active filtering system confirms its validity, which uses the SOGI filter to extract the reference currents from the distorted line currents, compared with the traditional PQ theory based on LPF. In addition, the simulation performed also demonstrates the superiority of the proposed approach, for DC bus voltage control based on the Lyapunov function, compared with the traditional proportional-integral (PI) controller. Both novel approaches contribute towards an improvement in the overall performance of the system, which consists of a small rise and settling time, a very low or nonexistent overshoot, and the minimization of the total harmonic distortion (THD).     

单片机应用系统综合实验装置的设计

单片机原理与应用作为电子技术类学科中的必修课程具有很强实践性,要求学生掌握实际应用能力,为此研制了基于单片机系统通信为基础的实验板,依据单片机应用系统特点,可完成SPI、I^2C、UART串行通信以及并行总线方式通信。实验板有利于学生更好地了解和掌握单片机应用系统设计的方法,有利于学生进行自主设计和内容拓展。做到培养学生的学习能力、提高学生的学习兴趣、发挥学生的创造性。     

自动化控制技术在玻璃工业中的现状及发展方向

通过对玻璃生产线的控制系统分析,提出现场总线技术是玻璃企业管理和工业自动化应用的发展方向.     

P87C591在电力调度系统中的应用设计

简述了CAN现场总线和P87C591单片机的特点以及它们的优越性,并详细介绍了基于P87C591单片机的电力调度系统中智能测控点硬件电路设计及要注意的细节问题,最后给出了CAN控制器的初始化程序的流程图。