食品包装高精度计量控制方法

目的 为提高食品包装过程计量组件的称量精度和效率,采用智能控制算法设计一种高精度计量控制系统.方法 在分析动态称量系统工作原理的基础上,建立称量过程数学模型,将控制对象由放料阀门开度转换为电机轴位置.考虑到传统PID控制的缺陷,结合PI Ziegler-Nichols和预测控制设计一种高精度计量控制系统.该控制系统可实现比例和积分系数的在线调整,能够抑制参数变化、负载扰动;预测控制可提高系统收敛速度和跟踪能力.最后进行仿真和实验研究.结果 仿真结果表明,智能控制算法具有比较强的自适应、自整定能力,计量精度可以达到静态称量水平,均高于99.5％.结论 食品包装高精度计量控制系统具有精度高、稳定性好、称量效率高等特点,在实际应用中对称量过程的控制效果相对较好.     

Investigation of the Ga-Sb-S chalcogenide glass with low thermo-optic coefficient as an acousto-optic material

In this study, two series of Ga_xSb_40-xS₆₀ (x = 4, 6, 8, 10 mol%) and Ga_ySb₃₆S_64-y (y = 3, 5, 6 mol%) glasses were prepared and the relationship between their compositional and acousto-optic (AO) properties was investigated systematically for the first time. In the Ga_ySb₃₆S_64-y system, the AO figure of merit (M₂) increased as the Ga increased, and the maximum M₂ of the Ga₆Sb₃₆S₅₈ glass was 455.78 × 10^?18 s³/g, which is ～301 times greater than that of fused silica and ～2.5 times greater than that of As₂S₃ chalcogenide (ChG) glass at 1550 nm. However, its thermo-optic coefficients (dn/dT) varied greatly (32.1 × 10^?6 °C^?1–57.2 × 10^?6 °C^?1), and acoustic attenuations (α) at 10 MHz were high, from 5.446 dB/cm to 7.274 dB/cm. In the Ga_xSb_40-xS₆₀ glass system, the M₂ value and α at different ultrasonic frequencies gradually decreased with the improvement of Ga. Compared with the Ga_ySb₃₆S_64-y system, the Ga_xSb_40-xS₆₀ glass system had lower α (at 10 MHz) and dn/dT, which are 5.001 dB/cm–5.563 dB/cm and 17.3 × 10^?6 °C^?1–55.6 × 10^?6 °C^?1, respectively. These results provide a significant reference for the further development of novel ChG glasses and help expand their application fields.     

计及RSC控制的DFIG短路电流直流分量解析表达

现有文献针对计及转子变流器(RSC)控制的双馈感应风电机组(DFIG)定子短路电流解析表达,将定子磁链当作一阶直流衰减分量或忽略功率外环控制。基于DFIG电压、磁链和RSC控制方程,得到定子电流关于定子电压和定子功率的传递函数,提出定子电流的精确解析表达式。基于RSC内、外环PI参数关系,推导直流分量衰减时间常数和角频率关于PI参数的表达式。分析了RSC内外环PI参数对定子电流直流衰减分量的影响。仿真结果验证了解析表达式的准确性,为PI参数选取和保护装置测量、整定提供依据。     

煤系地层致密砂岩气甜点区地震逐级预测——以鄂尔多斯盆地东南缘下二叠统山西组2~3亚段为例

鄂尔多斯盆地东南部下二叠统山西组2~3亚段(以下简称山2~3亚段)为该盆地重要的天然气勘探目的层,但该亚段储层薄、厚度变化快、非均质性强,储层预测和勘探目标优选难度大。为了准确预测该亚段煤系地层致密砂岩气甜点区、提高天然气勘探成功率,针对该套储层的特征和预测难点,提出了90°相移技术识别河道外形、模型约束波阻抗反演刻画砂体厚度和子波衰减梯度属性识别含气砂体的地震逐级预测技术。研究结果表明:①山2~3亚段上覆5号煤地震强反射层,下伏储层地震反射能量弱,加之为稀疏二维地震测网、井控程度低,致使致密砂岩气甜点区预测难度大;②所提出的技术方法通过地震逐级预测约束,可以有效地刻画河道砂体分布并识别有效含气储层,提高了对勘探开发目标预测的精度;③基于该技术方法指导部署的勘探开发目标实钻效果好,地震预测结果横向分辨率高,真实地反映了河道及河道砂体的变化特征。结论认为,采用该方法可以有效地解决二维地震勘探区煤系地层强非均质性、薄储层致密砂岩气甜点区预测的地质难题。     

Interaction of IL-22/IL-22R1 promotes cell proliferation and suppresses apoptosis of colorectal cancer via phosphorylation of STAT3

Interleukin-22 (IL-22) is a member of IL-10 cytokine family which is expressed in activated T cells predominantly and in activated natural killer cells at lower levels. Previous studies have demonstrated the link between elevated levels of IL-22 and disease severity of psoriasis, Crohn’s disease, rheumatoid arthritis and interstitial lung diseases. However, the function of IL-22 in the development and progression of colorectal cancer (CRC) remains elusive. In this study, we first evaluated the IL-22/IL-22R1 level in CRC patients, and found that tumor tissues have more active expression of IL-22 and IL-22R1 than normal tissues, presenting correlation with the degree of differentiation of tumor tissues. Subsequently, Caspase and cell viability assays were performed on SW-480 cell line which expresses high level of IL-22R1 to examine if the supplementation of IL-22 has an impact on apoptosis and proliferation. In comparison with treatment of 5-FU, supplementation of IL-22 promoted cell proliferation and ameliorated apoptosis. To unveil signal transduction upon activation of IL-22R, we examined the phosphorylation of STAT3 in SW-480 cell line following supplementation of IL-22. The treatment of IL-22 also increased the level of p-Akt, an essential component in PI3K/Akt pathway. Although the link between STAT3 phosphorylation and PI3K/ Akt activation remains to be explored, our study revealed the mechanism underlying the effects of IL-22R activation on apoptosis as well as tumor differentiation, indicating the prognostic value of IL-22/IL-22R.     

PI3K/AKT/GSK3β信号通路参与腺苷A1R介导异丙酚对缺血再灌注损伤大鼠的脑保护作用

目的：探讨PI3K/AKT/GSK-3β信号通路参与异丙酚对缺血再灌注损伤大鼠的脑保护作用及机制。方法：健康雄性SD大鼠72只，所有大鼠参照Zea Longa法建立局灶性脑缺血再灌注损伤的模型。随机分成6组（n=12），A-假手术组，B-模型组（MCAO），C-异丙酚组，D-异丙酚+腺苷A1R拮抗剂组（DPCPX），E-异丙酚组+PI3K特异性抑制剂（LY294002），F-异丙酚+GSK-3β抑制剂组（SB216763），观察大鼠术后24 h神经功能评分情况；LDF监测插栓前后脑血流变化；采用TTC染色法检测各组大鼠的脑梗死体积；用HE染色方法观察大鼠脑组织形态学改变；免疫组织化学法检测Bcl-2阳性细胞表达；采用TUNEL检测各组大脑脑皮质缺血周围神经元凋亡细胞的百分率。结果：与A组比较，B、C、D、E及F组大鼠行为学、脑梗死体积、细胞凋亡率、Bcl-2蛋白表达量均增加（P<0.05）；与C组比较，B、D、E组大鼠行为学评分，脑梗死体积及细胞凋亡率均明显增加，Bcl-2蛋白表达量均明显减少（P<0.01），F组Bcl-2蛋白表达量却增加，细胞凋亡率降低（P<0.05），行为学评分减少、梗死体积减少（P<0.05）。 结论：腺苷A1R介导的异丙酚对缺血再灌注损伤大鼠的神经保护作用可能与PI3K/AKT/GSK-3β信号转导通路有关。     

Anti-proliferative effects of a small molecule inhibitor of CDK AT7519 on chronic myeloid leukemia (CML) cells through halting the transition of cells from G2/M phase of the cell cycle

Pathogenesis of chronic myeloid leukemia (CML) has mostly been studied with regard to the oncogenic role of BCR/ABL fusion; however, recent disclosures have declared that the challenges with the treatment of CML patients would not be resolved until the role of other aberrancies is ignored. Given the involvement of cyclin-dependent kinases (CDKs) in the pathogenesis of CML, the present study aimed to investigate the effects of a multi-CDK inhibitor AT7519 on BCR/ABL-harboring CML-derived K562 cells. Our results showed that AT7519 effectively reduced the survival of K562 and induced its anti-proliferative effect through the induction of G2/M arrest due to elevated p21 and p27. The resulting data also revealed that either direct or indirect suppression of c-Myc using specific c-Myc inhibitor 10058-F4 and selective PI3K inhibitor CAL-101 resulted in a superior cytotoxicity, suggesting that the activation of PI3K pathway could attenuate antileukemic effects of the inhibitor, at least partly, through a c-Mycdependent mechanism. To the best of our knowledge, to date, no study has addressed the effect of autophagy on CML cell response to AT7519, and, herein, we proposed for the first time that the suppression of autophagy boosted AT7519 cytotoxicity against K562. Overall, we suggested that selective CDK inhibitor AT7519 exerted antileukemic effect against CML cells and propose a novel therapeutic application for the inhibitor either as a single agent or in combination with c-Myc and/or PI3K inhibitors.     

Structural parameter design method for a fast-steering mirror based on a closed-loop bandwidth

When a fast-steering mirror (FSM) system is designed, satisfying the performance requirements before fabrication and assembly is vital. This study proposes a structural parameter design approach for an FSM system based on the quantitative analysis of the required closed-loop bandwidth. First, the open-loop transfer function of the FSM system is derived. In accordance with the transfer function, the notch filter and proportional-integral (PI) feedback controller are designed as a closed-loop controller. The gains of the PI controller are determined by maximizing the closed-loop bandwidth while ensuring the robustness of the system. Then, the two unknown variables of rotational radius and stiffness in the open-loop transfer function are optimized, considering the bandwidth as a constraint condition. Finally, the structural parameters of the stage are determined on the basis of the optimized results of rotational radius and stiffness. Simulations are conducted to verify the theoretical analysis. A prototype of the FSM system is fabricated, and corresponding experimental tests are conducted. Experimental results indicate that the bandwidth of the proposed FSM system is 117.6 Hz, which satisfies the minimum bandwidth requirement of 100 Hz.     

Study on maximum power point tracking of photovoltaic array in irregular shadow

Traditional maximum power point tracking (MPPT) methods can hardly find global maximum power point (MPP) because output characteristics curve of photovoltaic (PV) array may have multi local maximum power points in irregular shadow, and thus easily fall into the local maximum power point. To address this drawback, Considering that sliding mode variable structure (SMVS) control strategy have such advantages as simple structure, fast response and strong robustness, and P&O method have the advantages of simple principle and convenient implementation, so a new algorithm combining SMVS control method and P&O method is proposed, besides, PI controller is applied to reduce system chattering caused by switching sliding surface. It is applied to MPPT control of PV array in irregular shadow to solve the problem of multi-peak optimization in partial shadow. In order to verity the rationality of the proposed algorithm, the experimental circuit is built, which achieves MPPT control by means of the proposed algorithm and P&O method. The experimental results show that compared with the traditional P&O algorithm, the proposed algorithm can fast track the global MPP, tracking speed increases by 60% and the relative error decreased by 20%. Moreover, the system becomes more stable near the MPP, the fluctuations of output power is greatly reduced, and thus make full use of solar energy.     

Comparison of MPC based advanced hybrid controllers for STATCOM in medium scale PEM fuel cell systems

In this article is about off grid medium scale Proton Exchange Membrane (PEM) Fuel Cell (FC) Renewable Energy System (FCRES). It is aimed to investigate the elimination of reactive power on the loads fed from the FCRES by using PI-Model Predictive Control (PI-MPC), Fractional PI (PI^λ)-Model Predictive Control (PI^λ−MPC) and Two-Degree of Freedom PI (2DOFPI)-Model Predictive Controller (2DOFPI-MPC). The effectiveness of these controllers were examined and compared both when controlling reactive power and using different control techniques. The reactive power was attempted to be eliminated using Static Synchronous Compensator (STATCOM). An advanced controller structure has been introduced by controlling capacitor voltages by switching 24 IGBTs in the 5-level inverter within its structure. In this way, the efficiency of the system was increased. The system was simulated in MATLAB/Simulink environment. System consisted of FC, STATCOM, loads, filter, coupling inductance, measurement units and advanced hybrid controllers. In the study, system behavior was also examined in the case of compensation in the system consisting of FCs working off grid.