Current Status of Angiogenic Cell Therapy and Related Strategies Applied in Critical Limb Ischemia

Critical limb ischemia (CLI) constitutes the most severe form of peripheral arterial disease (PAD), it is characterized by progressive blockade of arterial vessels, commonly correlated to atherosclerosis. Currently, revascularization strategies (bypass grafting, angioplasty) remain the first option for CLI patients, although less than 45% of them are eligible for surgical intervention mainly due to associated comorbidities. Moreover, patients usually require amputation in the short-term. Angiogenic cell therapy has arisen as a promising alternative for these “no-option” patients, with many studies demonstrating the potential of stem cells to enhance revascularization by promoting vessel formation and blood flow recovery in ischemic tissues. Herein, we provide an overview of studies focused on the use of angiogenic cell therapies in CLI in the last years, from approaches testing different cell types in animal/pre-clinical models of CLI, to the clinical trials currently under evaluation. Furthermore, recent alternatives related to stem cell therapies such as the use of secretomes, exosomes, or even microRNA, will be also described.     

2019年黑龙江省猪肉市场运行情况分析

2018年非洲猪瘟疫情出现以来,全国及黑龙江省生猪生产、猪肉市场受到了较大的影响,生猪、能繁母猪存栏减少,生猪出场价格也经历了明显波动。2019年春节以后,随着省外调出量增加和猪源减少,黑龙江省生猪出场价格进入上升通道,超过了全国平均水平,白条猪肉批发价格和猪肉市场零售价格随之上行。通过对2019年黑龙江省生猪生产环节、屠宰加工环节、猪肉市场零售环节进行调研,对生猪出场价格、白条猪肉批发价格、猪肉零售价格、生猪和能繁母猪产能等指标进行分析,阐述了以生猪和猪肉市场为重点的肉类产销形势,为促进肉类产业高质量发展、提高市场保供能力提供参考。     

聚类混合型数据的密度峰值改进算法

聚类混合型数据，通常是依据样本属性类别的不同分别进行评价。但这种将样本属性划分到不同子空间中分别度量的方式，割裂了样本属性原有的统一性；导致对样本个体的相似性评价产生了非一致的度量偏差。针对这一问题，提出以二进制编码样本属性，再由海明差异对属性编码施行统一度量的新的聚类算法。新算法通过在统一的框架内对混合型数据实施相似性度量，避免了对样本属性的切割，在此基础上又根据不同属性的性质赋予其不同的权重，并以此评价样本个体之间的相似程度。实验结果表明，新算法能够有效地聚类混合型数据；与已有的其他聚类算法相比较，表现出更好的聚类准确率及稳定性。     

The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

Nb和时效时间对热轧中锰TRIP钢中P偏聚的影响

热轧态中锰TRIP钢首先经650 ℃退火2 h,随后在550 ℃进行等温时效热处理,采用场发射扫描电镜(FE-SEM)研究该钢中P的偏聚和时效析出行为的变化情况。结果表明,中锰TRIP钢中P在晶界的偏聚是一种非平衡偏聚现象,临界时间约为50 h,与理论计算结果48 h较为吻合。在局部偏聚区域内,C与P存在共偏聚的关系,即P偏聚量高的地方,C含量也高。而合金元素Nb具有抑制P偏聚的效果,在20~70 h时效时间内,可以相对降低6.57%~19.5%的最大P偏聚量。根据电子背散射衍射(EBSD)菊池线分析,P偏聚量低于2.28at%时,P为固溶状态,高于2.28at.%时,P为析出状态。     

夹杂物对工程机械用钢Q345FCA疲劳寿命的影响

采用QBWP-6000J型简支梁旋转弯曲疲劳试验机测定了高疲劳寿命工程机械用钢Q345FCA的疲劳寿命;采用扫描电镜(SEM)对疲劳断口形貌进行了观察,并用附带的能谱仪(EDS)寻找断口上的夹杂物;借助夹杂物自动分析系统对钢中的夹杂物进行了分析。通过对试验数据的分析,计算得出了Q345FCA钢和Q345钢夹杂物的表面临界尺寸、次表面临界尺寸和内部临界尺寸。结果表明,Q345FCA钢的疲劳极限为273 MPa,Q345钢的疲劳极限为266 MPa。Q345FCA钢和Q345钢中夹杂物尺寸均小于临界夹杂物尺寸,且断口形貌显示所有疲劳断裂均不是由夹杂物所引起,夹杂物不是疲劳源。     

New insight to the oxidation kinetics of silicon-containing steel at high temperature

This study investigated the oxidation kinetics of silicon-containing steel at 1150–1300 °C using a Simultaneous Thermal Analyzer under atmospheric conditions similar to that of an industry reheating furnace. There is a critical time point for the oxidation kinetics at an oxygen concentration of 4·0 vol.-%., following which the oxidation rate constant increases with the increasing oxidation temperature. The model coefficient A in the kinetic oxidation equation was found to be constant. However, before the critical time point, the oxidation rate constant remained unchanged; the model coefficient A decreased with the increasing temperature. Therefore, the kinetic model of silicon-containing steel for isothermal oxidation was observed to be a modified one on the basis of the experimental data. In addition, the critical time point was prolonged with the increasing isothermal oxidation temperature. Moreover, the oxidation activation energy of the tested silicon-containing steel was 366·16 kJ mol^?1.     

暗纹东方鲀鱼精蛋白的纯化及抑菌活性研究

采用葡聚糖凝胶(Sephadex G-50)层析和羧甲基琼脂糖凝胶FF(CM Sepharose Fast Flow)离子交换层析对暗纹东方鲀鱼精蛋白进行纯化,利用精氨酸显色反应鉴定鱼精蛋白,并测定了鱼精蛋白对金黄色葡萄球菌、大肠杆菌和沙门氏菌的最小抑菌浓度、抑菌圈直径和生长曲线的影响。结果表明,暗纹东方鲀鱼精蛋白在217,273nm处各有1个吸收峰且217nm处的吸收峰较高,经SDS-PAGE电泳发现纯化后的鱼精蛋白白条带较纯化前的细且无拖尾现象;暗纹东方鲀鱼精蛋白对革兰氏阴性菌(沙门氏菌和大肠杆菌)和革兰氏阳性菌(金黄色葡萄球菌)均具有抑制作用,可以延缓菌种的生长,对金黄色葡萄球菌、大肠杆菌和沙门氏菌的最小抑菌浓度分别为500,1 000,1 000mg/L。     

Domestic demand-side response with heat pumps: controls and tariffs

ABSTRACT

Electric heat pumps feature prominently in projected energy transitions in the UK and elsewhere. Owing to their high electricity consumption, heat pumps are viewed as important targets for demand-side response (DSR). Findings are presented from a field trial of a new control system that aims to optimize heat pump performance, including under time-varying tariff conditions. The trial involved monitoring 76 properties with heat pumps, but without dedicated heat storage; 31 of these received the control system. Interviews were conducted with a subsample of 12 participants. The controller successfully evened out electricity demand over the day (reducing the evening peak), but this was associated with increased late night and daytime temperatures. Interview participants reported some disturbance owing to overnight heating and noise, as well as usability issues with the controller interface and hardware. These issues present risks to the future acceptability of such systems. While the system delivered short-term demand reductions successfully, longer-term demand shifting risked causing unacceptable disturbance to occupants. Future control systems could overcome some of the issues identified in this pioneering trial through more effective zoning, using temperature caps or installing dedicated heat storage, but these may either limit the available flexibility or be challenging to achieve.     

重力注水过程流动不稳定现象关键影响因素研究

重力驱动注水过程中由于流量较小以及蒸汽的积聚可能导致流动不稳定现象的发生，对核反应堆安全运行具有重要的影响。通过实验研究的方法，搭建了重力注水模拟实验装置，研究了不同蒸汽出口形阻、高位储水箱水位和加热棒初始温度下流动不稳定现象的变化规律。结果表明，重力驱动注水过程流动不稳定现象包含冷却水初次注入阶段、注入水逐出阶段和冷却水再注入阶段等。在一定冷却水初始温度、冷却水入口形阻以及系统压力下，蒸汽排出速度以及实验本体内筒顶部的聚集情况取决于蒸汽出口形阻，减小蒸汽出口形阻可加快蒸汽排放速度，压力峰峰值降低、振荡周期变长，有利于系统稳定；提高高位储水箱水位加快了冷却水注入速率，增加了加热棒被淹没率，降低了流动不稳定现象的发生次数和持续时间；随加热棒初始温度的升高，冷却水流量出现了波动向停滞的转变，流动不稳定现象发生的次数增加且持续时间加长。