Phase,domain, and microstructures in Sr2+ substituted low-temperature sintering PZT-based relaxor ferroelectrics

The Ag-Pd internal electrode of multilayer piezoelectric ceramics needs to be sintered below 1000°C, and lead wires and components need to be welded with lead-free solder at 260°C. PNN–PMW–PZT–xSr piezoelectric ceramics with high Curie temperature (T_c > 260°C) were synthesized at a low sintering temperature (960°C) to meet the requirements of multilayer piezoelectric devices. The relationship between structures (phase, domain, and microstructures) and electrical properties (piezo/ferroelectric properties, and dielectric relaxation) in the Sr²⁺ substituted ceramics was investigated. Rietveld refinement and Raman spectra show that Sr²⁺ substitution can cause the phase change and increase the force constant of [BO₆] octahedron. The piezoelectric response increases with increasing the content of the tetragonal phase (CTP) in the rhombohedral-tetragonal (R-T) coexisted ceramics. The ceramics with 0.6 mol% Sr²⁺ substitution have minimum activation energy for domain wall movement (E_a) of 0.0362 eV which favors the formation of nanometer-sized domains, and possess excellent electrical properties (d₃₃ = 623 pC/N, d₃₃^* =783 pm/V, T_c =295°C). The higher the CTP, the lower the E_a. The lower E_a favors the rotation of polarization direction and extension, and is beneficial to the generation of the nanometer-size domains, resulting in high piezoelectric properties.     

Inter-Sample and Intra-Sample Variability in Electronic Properties of Methylammonium Lead Iodide

While the challenges associated with the stability of metal halide perovskites are well known and intensely studied, variability in electronic properties represents an equally significant, yet seldom studied, challenge that could potentially slow or inhibit the commercial viability of these systems. In this work, the contactless characterization technique time-resolved microwave conductivity (TRMC) is used to quantify the variability in electronic properties of the prototypical perovskite, methylammonium lead iodide (MAPbI₃) both between different samples, and at different locations within the same sample. Using scanning electron microscopy (SEM) and a quasi-automated image-analysis strategy, it is possible to evaluate the metrics of heterogeneity in surface microstructure and correlate them with the electronic properties as obtained by TRMC. Substantial intra-sample and inter-sample variation is observed in the mobility-yield product in samples prepared following differing protocols, and in samples prepared following identical protocols.     

Essential (Mg,Fe, Zn and Cu) and Non-Essential (Cd and Pb) Elements in Predatory Insects (Vespa crabro and Vespa velutina): A Molecular Perspective

The recent introduction of the Asian yellow-legged hornet, Vespa velutina, into Europe has raised concern regarding the threat to honeybees and the competition with the European hornet, Vespa crabro. The aim of this study was to investigated essential (Mg, Fe, Zn, Cu) and non-essential (Cd and Pb) elements in these two species. Element concentrations were determined in the whole body and separately in the head, thorax and abdomen using atomic absorption spectrometry (AAS). The changes in essential element concentration and speciation during metamorphosis were also studied using size exclusion chromatography followed by AAS and proteomic analysis. In both species, the essential elements were more concentrated in the abdomen due to the presence of fat bodies. Magnesium, Fe and Zn concentrations were significantly higher in V. crabro than in V. velutina and could have been related to the higher aerobic energy demand of the former species required to sustain foraging flight. Low concentrations of Cd and Pb were indicative of low environmental exposure. The concentration and speciation of essential elements, particularly Fe, varied among the developmental stages, indicating a modification of ligand preferences during metamorphosis. Overall, the results in the present study provide a better understanding of the hornet metal metabolism and a foundation for additional studies.     

Challenges in the CO2 emissions of the Turkish power sector: Evidence from a two-level decomposition approach

Decarbonization of the energy system is urgent to avert the disruptions in the climate. Considering its share, the low carbon transition of the power sector is pivotal. Growing electricity demand poses unique challenges for Turkey to enact deep decarbonization. It is vital to uncover the contributing causes of emissions to provide strategic oversight for carbon management activities. This study investigates key drivers of CO₂ emissions from the power sector using the Logarithmic Mean Divisia Index decomposition method. While efficiency improvement contributes to sustainable yet minor mitigation, changes in the fossil-fuel share indicate a cycling but significant overall impact.     

烧结时间对含铅玻璃制备微晶玻璃析晶及性能的影响

以铅玻璃与粉煤灰为原料，通过协同熔炼制备了微晶玻璃。通过XRD和SEM等手段研究了不同烧结时间下微晶玻璃的物相组成及显微结构，测定了微晶玻璃的密度、吸水率、维氏硬度和化学抗性。结果表明: 延长烧结时间对含铅玻璃加入量为40%(FG40)、50%(FG50)样品的晶相类型和晶化程度有影响，而对含铅玻璃加入量为60%(FG60)、70%(FG70)和80%(FG80)样品的影响较小。随着烧结时间延长，样品晶化程度提高，晶体长大，玻璃相减少。适宜的含铅玻璃加入量为50%~70%，对应的FG50、FG60、FG70样品最佳烧结时间分别为4 h、3 h、3 h。     

电感耦合等离子体原子发射光谱法测定辛酸铑催化剂中铂钯铅铁铜铝镍

准确测定辛酸铑催化剂中杂质元素含量,是判定产品是否合格的重要指标之一。以往常采用直流电弧发射光谱法(摄谱法)进行检测,但测定周期长,且重复性较差。用电感耦合等离子体原子发射光谱法(ICP-AES)测定辛酸铑催化剂中微量杂质元素时,辛酸铑催化剂样品中含有的大量有机组分和铑基体会对测定有严重干扰。实验采用反复滴加硝酸消解样品中有机组分,再用王水溶解盐类,选用合适背景点扣除的方式消除铑基体的干扰,建立了使用ICP-AES测定辛酸铑催化剂中0.001%~0.1%(质量分数)Pt、Pd、Pb、Fe、Cu、Al、Ni等7种微量杂质元素的方法。各元素在0.10~10.00μg/mL范围内与其发射强度呈线性关系,相关系数均大于0.9999;方法检出限(μg/mL)为0.075(Pt)、0.0033(Pd)、0.015(Pb)、0.0036(Fe)、0.010(Cu)、0.001(Al)、0.012(Ni)。实验方法用于测定辛酸铑催化剂样品中Pt、Pd、Pb、Fe、Cu、Al、Ni,结果的相对标准偏差为(RSD,n=7)为1.4%~9.6%。按照实验方法测定辛酸铑催化剂中Pt、Pd、Pb、Fe、Cu、Al、Ni,并与直流电弧发射光谱法的测定结果进行比对,结果相一致。     

TLCD基础隔震框架结构的减振控制研究

为了避免和减轻由过大隔震层位移引起的损害,对基础隔震框架结构装设调频液柱阻尼器(tuned liquid column damper,简称TLCD)后混合系统的减振效果进行研究。建立了单层和多层混合控制系统在地震作用下的运动方程,采用TLCD-结构体系转化为调频质量阻尼器(tuned mass damper,简称TMD)-结构体系的等效方法,利用TMD参数优化公式,得到单个TLCD初始设计参数,并采用状态空间方程得到多个TLCD最优设计参数。通过对某8层基础隔震结构进行模拟,证明了该理论设计方法的合理性。该混合结构不仅可以减小隔震层位移和加速度,而且对上部结构位移和加速度反应都能更有效的控制。     

广东某复杂铜铅锌矿浮选试验研究

广东某复杂铜铅锌矿石中的矿物嵌布粒度较细且相互包裹，导致现场铜、铅、锌浮选分离困难，为解决此问题进行了选矿试验研究。结果表明：在选铜时，选用FK 1与DS组合抑制铅锌，可有效解决精矿的互含问题；在高碱工艺下，采用先铜后锌的优先浮选工艺，铜铅粗泡再磨后经2次精选，能获得铜品位为2110%、回收率为8088%的铜精矿，铅锌总含量为1023%，达到铜精矿四级品要求；采用1粗2精2扫流程处理选铜尾矿，获得了锌品位为5217%、回收率为9278%的锌精矿。试验所用药剂全部为常规药剂，试验流程结构简单，现场实施比较容易，可作为现场改造的依据。     

Influence of temperature,calcium and sucrose concentration on viscoelastic properties of Prosopis chilensis seed gum and nopal mucilage dispersions

Viscoelastic properties of two nontraditional hydrocolloid dispersions were evaluated. Prosopis chilensis seed gum was evaluated based on temperature (5–80 °C) and added CaCl₂ (0.07%), whereas nopal mucilage was evaluated based on temperature (5–80 °C) and sucrose concentration (0–20%). Viscoelasticity was tested by the small strain oscillatory shear test; storage modulus (G′), loss modulus (G″) and tan δ were reported. Prosopis chilensis and nopal dispersions behaved as weak gels (G’ > G’’) regardless of experimental condition. Raising temperature from 20 to 80 °C significantly increased G’. The gel structure was strengthened by adding CaCl₂ and G’ increased at 40 °C. The sucrose effect depended on concentration and temperature; at low sucrose concentrations, G’ modulus increased regardless of temperature level, but at high concentrations, it decreased at temperatures >40 °C. In conclusion, nopal and Prosopis chilensis dispersions show weak gel structure regardless of experimental condition. G′ increases as temperature increases, and these dispersions could be suitable for food applications requiring heat tolerance.