智能电网中D2D网络的通信资源管理优化方案

当前在智能电网的应用中,各种智能终端的使用,使得移动数据流量空前增长,电力互联方式在面临海量数据传输的需求时,由于资源受限,信道间会产生一定的干扰,从而影响通信质量。为了解决通信资源管理这一问题,与常见的移动边缘计算(MEC)方法不同,文中提出了一种网络资源分配方法,优化链路选择和子信道分配,以实现能量效率的最大化。仿真结果表明,与没有卸载和部分优化的方法相比,此方法在能效方面有了很大的提高。     

GC-MS法测定缬草残渣中的化学组分

分别使用95％乙醇和四氯化碳作为提取溶剂,在78℃左右,对已提取过挥发油的缬草残渣中化学成分进行提取,借用气相色谱-质谱联用方法(GC-MS)对提取浸膏中化学组分进行分析.结果显示:以乙醇作为提取溶剂条件下,共鉴定出38中化学组分,数据出峰相对总质量分数为81.7％;以四氯化碳为提取溶剂条件下,共鉴定出44种化学组分,数据出峰相对总质量分数为84.4％.     

A-site Ca2+ substitution induced polyvalent Cu cations and correlated polaron relaxations in colossal permittivity Li1-xCaxCuNb3O9

LiCuNb₃O₉ has been reported newly a colossal permittivity (CP) perovskite, in which the B-site NbO₆ octahedra play a bridging role in the polaron hopping. However, how the A-site modification affects the origin of the polarons and further the CP behaviours remains unexplored. To this end, A-site Ca²⁺ was incorporated to form Li_1-xCa_xCuNb₃O₉, and the local states, dielectric relaxations and conduction behaviours were comprehensively studied. The substitution induces the polyvalent Cu cations, i.e. Cu⁺/Cu²⁺/Cu³⁺. Bond valence sum calculations imply that Cu²⁺ and Cu³⁺ are underbonded, and Cu⁺ is overbonded, while B-site Nb⁵⁺ shows slightly different with theoretical pentavalence. All the compositions exhibit a similarly room-temperature CP response, but present two dielectric relaxations, i.e. T_R1:170–300 K and T_R2:260–400 K. Comprehensive investigations on universal dielectric response and bulk dc conductivity indicate that the T_R1 follows the variable-range-hopping where the electron hopping between the mixed Cu⁺/Cu²⁺, while T_R2 contributes from the Cu³⁺ nearest neighbor hopping.     

厂房温度特性建模与动态仿真

本文开发了一套制冷状态下某洁净厂房的温度特性模型,该模型相对Multizone模型结果更精确,相对CFD模型计算更快捷.运用该模型,对空调参数、室内设备散热量、室外参数等影响因素开展动态仿真,研究厂房整体及局部区域的温度特性,仿真结果与实测数据符合情况良好.结果 显示空调系统与室内散热量对厂房温度影响较大.厂房内设备散热量变化对所处区域影响最大.厂房连续运行时,室内参数对室温影响比室外参数明显,厂房停工休息时,厂房温度仅受室外参数影响.     

离子色谱-电导法检测酱油中氯化钠的含量

该研究采用灰化预处理+离子色谱-电导法检测酱油中食盐的含量，并与莫尔法、电位滴定法进行比较。结果表明，莫尔法存在滴定过量问题，电位滴定法对温度等外界环境条件和仪器操作要求苛刻，而离子色谱-电导法具有操作简便快速并具有较好的准确度和精密度。实验结果表明，氯化钠含量处于11.56～11.61 g/100 mL之间，回收率实验结果为96.00%～102.10%，相对标准偏差为0.089%。干扰实验对结果无明显影响，且能同时测定多种离子，可用于成品酱油中氯化钠含量的检验。     

Advances in the in vitro digestion and fermentation of polysaccharides

In vitro digestion models are widely used to study the structural changes, digestion and release of food components under simulated gastrointestinal conditions. As compared to the in vivo digestion tests, the in vitro digestion reflects the digestion and utilisation of food after ingestion and has the advantages of being time consuming, inexpensive, reproducible and free from moral and ethical restrictions. This study reviewed the current research studies on the in vitro simulated digestion of polysaccharides conducted in the last 5 years and focused on the oral, gastric and intestinal digestion models, with the aim of providing a basis for the further testing of changes in the content, structure and active ingredients of polysaccharides before and after digestion.     

烧结时间对含铅玻璃制备微晶玻璃析晶及性能的影响

以铅玻璃与粉煤灰为原料，通过协同熔炼制备了微晶玻璃。通过XRD和SEM等手段研究了不同烧结时间下微晶玻璃的物相组成及显微结构，测定了微晶玻璃的密度、吸水率、维氏硬度和化学抗性。结果表明: 延长烧结时间对含铅玻璃加入量为40%(FG40)、50%(FG50)样品的晶相类型和晶化程度有影响，而对含铅玻璃加入量为60%(FG60)、70%(FG70)和80%(FG80)样品的影响较小。随着烧结时间延长，样品晶化程度提高，晶体长大，玻璃相减少。适宜的含铅玻璃加入量为50%~70%，对应的FG50、FG60、FG70样品最佳烧结时间分别为4 h、3 h、3 h。     

Pyrometallurgically regenerated LiMn2O4 cathode scrap material and its electrochemical properties

Recycling cathode materials from lithium-ion battery scraps can play a significant role in reducing environmental contamination and resource depletion. In this study, we employed pyrometallurgical techniques to regenerate LiMn₂O₄ cathode materials from recovered cathode scraps. First, the binder was removed under optimal conditions by a heating and stirring method to maximize the dissolution rate of the cathode scrap materials. Next, inductively coupled plasma spectroscopy was used to define the Li and Mn contents, and finally, the LiMn₂O₄ cathode material was regenerated by a pyrometallurgical method. After calcination under the optimum conditions of 500 °C for 12 h, electrochemical performance testing revealed obvious charge and discharge platforms in the charge/discharge curves; further, a high first-cycle discharge capacity was observed at 136.6 mAh·g^-1 (3.0–4.3 V and 0.1 C), which decreased to 93 mAh·g^-1 after 50 cycles. This process is low-cost and environmentally friendly, with the potential for recovering other cathode scrap materials.     

基于深度学习的包装缺陷快速检测方法

包装缺陷在线检测对提升产品质量具有重要意义.针对工业生产中人工目检效率低、漏检率高,以及基于显式特征提取的缺陷检测方法通用性差、特征提取复杂、缺陷区域占比小等问题,本文提出了基于迁移学习的改进MobilenetV2轻量化网络的包装缺陷快速检测方法,并利用某工厂糖果产线包装质检环节存在的4种表面缺陷对其进行测试.结果 表明,该方法具有检测速度快、缺陷正确检测率高等优点,单个产品处理时间为0.053 s,验证集上缺陷识别率为98.333％,在线测试缺陷品召回率为96.596％,在检测精度较高的同时能满足高速产线的实时性需求,最高支持2 m/s的传送带运行速度.