Piezoelectric properties of PVDF-conjugated polymer nanofibers

This study presents the development and characterization of PVDF-conjugated polymer nanofiber-based systems. Five different conducting polymers (CPs) were synthesized successfully and used to create the nanofiber systems. The CPs used are polyaniline (PANI), polypyrrole (PPY), polyindole (PIN), polyanthranilic acid (PANA), and polycarbazole (PCZ). Nanofiber systems were produced utilizing the Forcespinning® technique. The nanofiber systems were developed by mechanical stretching. No electrical field or post-process poling was used in the nanofiber systems. The morphology, structure, electrochemical and piezoelectric performance was characterized. All of the nanofiber PVDF/CP systems displayed higher piezoelectric performance than the fine fiber PVDF systems. The PVDF/PPY nanofiber system displays the highest piezoelectric performance of 15.56 V. The piezoelectric performance of the PVDF/CP nanofiber systems favors potential for an attractive source of energy where highly flexible membranes could be used in power actuators, sensors and portable, and wireless devices to mention some.     

Process Intensification of Living Cationic Polymerization of Isobutylene by a Flow Reaction System

Increasing the reaction temperature of the living cationic polymerization of isobutylene is crucial for industrial production due to the cost of refrigeration. The reaction temperature increase was achieved with an accelerated reaction rate using a flow reaction system. The polymerization conditions, including the flow reactor design, were based on the results of kinetic studies. Utilizing a milli‐scale flow reactor, polyisobutylene, which has a narrow molecular weight distribution, was obtained within a considerably short residence time at a high temperature. Furthermore, it was confirmed that the value of M_w/M_n correlates with the product of the Reynolds number and the angle of collision.     

Rheokinematics for product development—Formulation screening in rotational rheometers

Product formulations for industrial processes are typically developed at laboratory scale. However, the mixing conditions are not easily mimicked in the laboratory. A rotational device is proposed in this study as a fast laboratory-scale formulation development, which enables mimicking the mixing conditions in the industrial process. The geometrical configurations of the rotational device are from rheometry devices (plate-plate and cone-plate). The main advantages of this method are the small amounts of raw materials and shorter testing times. This methodology is applied to an industrial case study, the reaction injection molding (RIM) process. The mixing length scales evolution in the rotational rheometer were matched to those in RIM machines. The main novelty of this study is the introduction of a protocol that bridges the processing conditions at laboratory using small amounts of raw materials to high throughput continuous flow reactors.     

Neural network-based hybrid models developed for free radical polymerization of styrene

In the present work, the free radical polymerization of styrene is modeled by considering the phenomenology of the process (a simplified model, which does not include the diffusional effects, gel, and glass effects) in combination with an empirical model represented by an artificial neural network. Differential evolution (DE) algorithm, belonging to the class of evolutionary algorithms, is applied for developing the neural models in optimal forms. For improving the results—predicted conversion and molecular weights as function of time, temperature, and initiator concentration—different combinations between phenomenological model and neural network are tested; also, individual and stacked neural networks have been developed for the polymerization process. This methodology based on hybrid models, including neural networks aggregated in stacks, provides accurate results.     

Aqueous One-pot Synthesis of Glycopolymers by Glycosidase-catalyzed Glycomonomer Synthesis Using 4,6-Dimetoxy Triazinyl Glycoside Followed by Radical Polymerization

Glycopolymers have attracted increased attention as functional polymeric materials, and simple methods for synthesizing glycopolymers remain needed. This paper reports the aqueous one-pot and chemoenzymatic synthesis of four types of glycopolymers via two reactions: the β-galactosidase-catalyzed glycomonomer synthesis using 4,6-dimetoxy triazinyl β-D-galactopyranoside and hydroxy group-containing (meth)acrylamide and (meth)acrylate derivatives as the activated glycosyl donor substrate and as the glycomonomer precursors, respectively, followed by radical copolymerization of the resulting glycomonomer and excess glycomonomer precursor without isolating the glycomonomers. The resulting glycopolymers bearing galactose moieties exhibited specific and strong interactions with the lectin peanut agglutinin as glycoclusters.     

卡尔费休法测定液态氯乙烯中水含量的研究

采用卡尔费休法测定了液态氯乙烯单体中的水含量。试验确定了采样工具、样品的预处理方式及选用溶剂的最优方案,并进行了精密度与准确度的验证。结果表明卡尔费休法测定液态氯乙烯单体中的水含量准确、快速,可以用来准确、及时地指导生产。     

Discovery of New Antiproliferative Imidazopyrazole Acylhydrazones Able To Interact with Microtubule Systems

Even though immunotherapy has radically changed the search for anticancer therapies, there are still many different pathways that are open to intervention with traditional small molecules. To expand our investigation in the anticancer field, we report here a new series of compounds in which our previous pyrazole and imidazopyrazole scaffolds are linked to a differently decorated phenyl ring through an acylhydrazone linker. Preliminary tests on the library were performed at the National Cancer Institute (USA) against the full NCI 60 cell panel. The best compounds among the imidazopyrazole series were then tested by immunofluorescence staining for their inhibition of cell proliferation, apoptosis induction, and their effect on the cell cycle and on microtubules. Two compounds, in particular 4-benzyloxy-3-methoxybenzyliden imidazopyrazole-7-carbohydrazide showed good growth inhibition, with IC₅₀ values in the low-micromolar range, and induced apoptosis. Both compounds altered the cell-cycle phases with the appearance of polyploid cells. Immunofluorescence analysis evidenced microtubules alterations; tubulin polymerization assays and docking studies suggested the tubulin system to be the possible, although not exclusive, target of the new acylhydrazone series reported here.     

Polystyrene latex particles bearing primary amine groups via soap‐free emulsion polymerization

Polystyrene latexes were prepared in the presence of an amino‐containing functional comonomer, N‐(3‐aminopropyl)methacrylamide hydrochloride (APMH), via soap‐free batch emulsion polymerization initiated by the cationic initiator 2,2′‐azobis(2‐amidinopropane) dihydrochloride. These latexes were characterized by studying the influence of the ionic comonomers on the polymerization kinetics, particle size, surface charge density and colloidal properties. The synthesized latexes were monodisperse with a final size between 100 and 600 nm depending on the APMH concentration. The initial polymerization rate and the particle number increased in accordance with the Smith–Ewart theory for soap‐free styrene emulsion polymerization with a hydrophilic functional comonomer. The final functionalization rate of the particles has been particularly studied with the intention of fitting the prepared latexes to be used in the immobilization of biological molecules for biological sample preparation and diagnostic applications. © 2020 Society of Chemical Industry     

Physical and thermal properties of l‐lactide/ϵ‐caprolactone copolymers: the role of microstructural design

Understanding the underlying role of microstructural design in polymers allows for the manipulation and control of properties for a wide range of specific applications. As such, this work focuses on the study of microstructure–property relationships in l‐ lactide/?‐caprolactone (LL/CL) copolymers. One‐step and two‐step bulk ring‐opening polymerization (ROP) procedures were employed to synthesize LL/CL copolymers of various compositions and chain microstructures. In the one‐step procedure, LL and CL were simultaneously copolymerized to yield P(LL‐stat‐CL) statistical copolymers. In the two‐step procedure, poly(l‐ lactide) (PLL) and poly(?‐caprolactone) (PCL) prepolymers were synthesized in the first step before CL and LL respectively were added in the second step to yield P[LL‐b‐(CL‐stat‐LL)‐b‐LL] and P[CL‐b‐(LL‐stat‐CL)‐b‐CL] block copolymers as the final products. The findings reveal that, in addition to the copolymerization procedure employed, the length and type of the prepolymer play important roles in determining the chain microstructure and thereby the overall properties of the final copolymer. Moreover, control over the degree of crystallinity and the type of crystalline domains, which is controlled during the polymer chemistry process, heavily influences the physical and mechanical properties of the final polymer. In summary, this work describes an interesting approach to the microstructural design of biodegradable copolymers of LL and CL for potential use in biomedical applications. © 2019 Society of Chemical Industry     

Structure,surface tension,and rheological behaviors of hydrophobically associative polyacrylamides by self-emulsified microemulsion polymerization

Hydrophobically associating copolymers using acrylamide (AM), acrylic acid (AA), and Styrene (St) as comonomers were successfully prepared by self-emulsified microemulsion polymerization, in which low-molecular-weight AM/AA/St copolymers as surfactant and AM as cosurfactant. The structure and chemical composition of AM/AA/St copolymers were characterized by Fourier transform infrared, nuclear magnetic (NMR), and differential scanning calorimeter. The content of PSt in the copolymers is determined by ¹H nuclear magnetic resonance spectra, suggesting that the self-made polymer surfactant can disperse uniformly the St monomers to improve the copolymerization efficiency. Furthermore, the polymerization mechanism of the self-emulsified microemulsion method is explored preliminarily. During the synthesis of the copolymers, the purified copolymer solution is obtained in one step without using a small molecular emulsifier such as sodium dodecyl sulfate, in order to avoid the complicated post-treatment process of the small molecular emulsifier. The copolymers revealed good hydrophobic association properties and low surface tension.