三聚硫氰酸单钠盐的制备及应用研究进展

三聚硫氰酸单钠盐是一种新型的多官能团化精细化学品。介绍了三聚硫氰酸单钠盐的制备方法,以及其在橡胶硫化、橡胶与金属的硫化粘合等领域的应用研究进展。     

Preparation and characterization of calcium phosphate cement with enhanced tissue adhesion for bone defect repair

Anti-washout and tissue adhesion properties are essential for the clinical application of injectable bone materials. In this study, we prepared calcium phosphate cement (CPC) with anti-washout and tissue adhesion properties and attempted to build covalent bonds between CPC and the amino groups in bone tissue under a self-regulating pH system in the CPC (acidic to basic). The results of push-out tests demonstrated that a significant enhancement (from 6.42 ± 0.76 N to 61.5 ± 4.09 N) in tissue adhesion was obtained with the addition of 6% (w/w) oxidized sodium alginate (OSA) in CPC. The FTIR, XRD, anti-washout test, XPS, pH test, and SEM results suggested that the synergistic effect of OSA-citric acid (CA) led to the formation of a three-dimensional gel network structure in the CPC, and the Schiff base reaction between aldehyde and amino groups induced adhesion between CPC and the bone tissue. Further, the addition of less OSA had no significant negative effect on the hydration properties of CPC. Our work aims to promote the development of injectable bone material in clinical applications.     

Immiscible PHB/PBS and PHB/PBSA blends: morphology,phase composition and modelling of elastic modulus

This paper reports the thermal, morphological and mechanical properties of environmentally friendly poly(3-hydroxybutyrate) (PHB)/poly(butylene succinate) (PBS) and PHB/poly[(butylene succinate)-co-(butylene adipate)] (PBSA) blends, prepared by melt mixing. The blends are known to be immiscible, as also confirmed by the thermodynamic analysis here presented. A detailed quantification of the crystalline and amorphous fractions was performed, in order to interpret the mechanical properties of the blends. As expected, the ductility increased with increasing PBS or PBSA amount, but in parallel the decrease in the elastic modulus appeared limited. Surprisingly, the elastic modulus was found properly described by the rule of mixtures in the whole composition range, thus attesting mechanical compatibility between the two blend components. This unusual behavior has been explained as due to co-continuous morphology, present in a wide composition range, but also at the same time as the result of shrinkage occurring during sequential crystallization of the two components, which can lead to physical adhesion between matrix and dispersed phase. For the first time, the elastic moduli of the crystalline and mobile amorphous fractions of PBS and PBSA and of the mobile amorphous fraction of PHB at ambient temperature have been estimated through a mechanical modelling approach. © 2021 The Authors. Polymer International published by John Wiley & Sons Ltd on behalf of Society of Industrial Chemistry.     

响应面法优化甘薯脆片干燥工艺

为探究甘薯脆片热泵干燥最佳工艺,在单因素试验基础上,以烘干温度、烘干时间、切片厚度、汽漂时间为影响因素,以含油率及感官评分为响应值,用Box-Behnken试验设计建立响应面分析模型。结果表明,甘薯脆片烘干最佳工艺为:烘干温度74℃、切片厚度2.7 mm、汽漂时间3 min,烘干时间为3.5 h,在此优化条件下,甘薯脆片油炸后感官评分为88.75分,含油率为7.84%,在此条件下得到的产品色香味俱全。     

Suppression of forced vibration due to chip segmentation in ultrasonic elliptical vibration cutting of titanium alloy Ti–6Al–4V

Ultrasonic elliptical vibration cutting of titanium alloy Ti–6Al–4V is investigated in this research. Because products made of Ti–6Al–4V alloy are usually designed for possessing low-rigidity structures or good-quality cut surfaces, machining requirements such as low cutting forces and slow rate of tool wear need to be fulfilled for realization of their precision machining. Therefore, the ultrasonic elliptical vibration cutting is applied as a novel machining method for those products. Machinability of Ti–6Al–4V alloy by the ultrasonic elliptical vibration cutting with cemented carbide tools is examined to figure out suitable cutting conditions for precision machining of Ti–6Al–4V alloy. As experimental results, generated chips, cutting forces, and profiles of cut surfaces are indicated. A forced vibration problem occurred due to the segmented chip formation, which is also well-known in the ordinary non-vibration cutting. Therefore, characteristics of the forced vibration due to the chip segmentation are investigated in this research. Through the experiments, it is found that the frequency and magnitude of the forced vibration have relation with the average uncut chip thickness and cutting width. Especially, it is found that the averaging effect can suppress the forced vibration, i.e. the chip segmentation tends to occur randomly over the large cutting width, and hence the force fluctuations with random phases tend to cancel each other as the cutting width increases relatively against the average uncut chip thickness. Based on the investigations, a new practical strategy to suppress the forced vibration due to chip segmentation is proposed and verified. Using the proposed method significantly decreased cutting forces and good quality of surfaces are obtained when the forced vibration is suppressed compared to the ordinary non-vibration cutting results. Therefore, the results suggest that the precision machining can be realized without sacrificing the machining efficiency by increasing the width of cut and decreasing the average uncut chip thickness.     

军工船舶发电机用特种漆包线的研制

为提升漆包线产品的技术水平与行业市场竞争力,使产品进入漆包线产品的高端市场,扩大公司漆包线新品种与技术储备,提升公司科研创新和新产品的研发能力,与客户合作开展对军工船舶发电机用特种漆包线的研制。根据特种漆包线的性能要求和关键技术,对其漆膜绝缘材料的选择、产品结构的设计与优化及研制的生产工艺技术进行探讨,研制出的特种漆包线通过对其性能考核,完全满足客户的各项性能指标要求。     

Multifunctional Hydrophobized Microparticles for Accelerated Wound Healing after Endoscopic Submucosal Dissection

Endoscopic submucosal dissection (ESD) provides strong therapeutic benefits for early gastrointestinal cancer as a minimally invasive treatment. However, there is currently no reliable treatment to prevent scar contracture resulting from ESD which may lead to cicatricial stricture. Herein, a multifunctional colloidal wound dressing to promote tissue regeneration after ESD is demonstrated. This sprayable wound dressing, composed of hydrophobized microparticles, exhibits the multifunctionality necessary for wound healing including tissue adhesiveness, blood coagulation, re‐epithelialization, angiogenesis, and controlled inflammation based on hydrophobic interaction with biological systems. An in vivo feasibility study using swine gastric ESD models reveals that this colloidal wound dressing suppresses fibrosis and accelerates wound healing. Multifunctional colloidal and sprayable wound dressings have an enormous therapeutic potential for use in a wide range of biomedical applications including accelerated wound healing after ESD, prevention of perforation, and the treatment of inflammatory diseases.     

基于STM32单片机的大学生体能监测仪设计与实现

体能监控仪作为生命体征监测设备,对于辅助大学生完成体能训练有很大帮助;基于STM32单片机技术,设计开发集成了多种传感器的一种大学生体能监测装备,它能够有效的检测包括心率检测、人体的步数、运动圈速、消耗卡路里等信息;该设计采用了STM32作为主控芯片,采用模块化的设计思路;在系统硬件设计方面,设计了包括STM32控制系统、心率获取电路、三轴传感器电路、显示电路以及按键电路等;同时将软件模块拆分成了初始化子程序、心率获取子程序,步数获取子程序,显示子程序等;Proteus仿真结果显示,使用STM32单片机技术设计的体能监测系统,能够运行稳定,测量心率范围60次/min~180次/min,可在心率异常时报警,同时检测步数的准确率达98%,满足体能监测任务需要,实验结果符合预期;为STM32单片机在体育运动研究信息化中应用提供参考。     

Understanding stickiness in sugar-rich food systems: A review of mechanisms,analyses, and solutions of adhesion

Stickinessis an inherent textural property in many sugar-rich foods, which can be problematic to the processing of confectionery products. The adhesion between foods and contact surfaces during processing and consumption has not been well understood in academia or industry. The theories of adhesion were discovered by scientists in the adhesive field of study, some of which can explain the stickiness phenomenon of confections. This work reviewed these theories in the context of sugar-rich foods, followed by a survey on the sensory and instrumental analyses of stickiness. Furthermore, the contributions of ingredients, temperature, compression, and contact surfaces to sugar-rich food adhesion are highlighted.