Gluten-free cakes with walnut flour: a technological,sensory, and microstructural approach

Walnut flour (WF), a by-product of walnut oil production, is characterised by high polyunsaturated fatty acids, proteins, and fibre contents and presents suitability for bakery products. However, when using non-traditional ingredients, it is essential to evaluate the effect on the quality properties of the final product. So, this work aimed to assess the impact of WF on the technological, physicochemical, and sensory properties of gluten-free (GF) cakes. WF was added at a flour blend (cassava (CS) and maize (MS) starches and rice flour) at 0, 10%, 15%, and 20%. The results showed that WF modified starch gelatinisation, increased amylose–lipid complex (ALC) content, and made crumbs easier to chew. Besides, the total dietary fibre (TDF) and protein content significantly increased. Cakes with 15% WF presented the highest specific volume (SV) and no differences in overall acceptability with respect to control. Hence, WF is a suitable ingredient for gluten-free bakery products.     

Green Measurements for Software Product Based on Sustainability Dimensions

Software is a central component in the modern world and vastly affects the environment’s sustainability. The demand for energy and resource requirements is rising when producing hardware and software units. Literature study reveals that many studies focused on green hardware; however, limited efforts were made in the greenness of software products. Green software products are necessary to solve the issues and problems related to the long-term use of software, especially from a sustainability perspective. Without a proper mechanism for measuring the greenness of a particular software product executed in a specific environment, the mentioned benefits will not be attained. Currently, there are not enough works to address this problem, and the green status of software products is uncertain and unsure. This paper aims to identify the green measurements based on sustainable dimensions in a software product. The second objective is to reveal the relationships between the elements and measurements through empirical study. The study is conducted in two phases. The first phase is the theoretical phase, where the main components, measurements and practices that influence the sustainability of a software product are identified. The second phase is the empirical study that involved 103 respondents in Malaysia investigating current practices of green software in the industrial environment and further identifying the main sustainability dimensions and measurements and their impact on achieving green software products. This study has revealed seven green measurements of software product: Productivity, Usability, Cost Reduction, Employee Support, Energy Efficiency, Resource Efficiency and Tool Support. The relationships are statistically significant, with a significance level of less than 0.01 (p = 0.000). Thus, the hypothesised relationships were all accepted. The contributions of this study revolve around the research perspectives of the measurements to attain a green software product.     

基于LP与小波包的复杂机电系统监测序列混沌降噪方法

针对流程工业生产系统监测数据存在强噪声和混沌性的特点,提出了一种局部投影方法(Local Projection Method)与小波包方法相结合的信号降噪方法。该方法先利用局部投影方法从动力学系统嵌入流形的角度进行多次迭代降噪,并根据关联维数来判定迭代终止;再利用小波包方法从频率的角度进行降噪,抑制高频噪声的干扰,取得了较好的降噪效果。用Lorenz时间序列进行仿真验证,对仿真时间序列加入不同程度的噪声,对比分析小波包、局部投影与该方法降噪后的相空间、SNR值和最大Lyapunov指数,证明了该方法对于中高强度噪声具有更好的降噪效果。并将该方法用于某压缩机组的实际监测数据降噪,评估三种方法的降噪效果,进一步验证了该方法的优越性。     

Flower‐shaped ultra‐wideband fractal antenna

A flower‐shaped ultra‐wideband fractal antenna is presented. It comprises a fourth iterative flower‐shaped radiator, asymmetrical stub‐loaded feeding line, and coplanar quarter elliptical ground planes. A wide operating band of 12.12 GHz (4.58‐16.7 GHz) for S ₁₁ ≤ ? 10 dB is achieved along with an overall antenna footprint of 15.7 × 11.4 mm². In addition, other desirable characteristics, that is, omnidirectional radiation patterns, peak gain upto 5 dB, and fidelity factor more than 75% are achieved. A good agreement exists between the simulation and measured results. The obtained results illustrate that this antenna has wide operating range and compact dimensions than available structures.     

镁质熔剂性球团矿相的多重分形谱

 球团矿相微观结构决定其冶金物理化学性能，为透视球团矿微观结构与其宏观冶金物理化学性能之间的依赖关系，需要解决的首要关键问题是矿相微观视觉特征的提取与定量表征。以镁质熔剂性球团微观矿相为研究对象，在直观分析矿相视觉特征的基础上，采用多重分形谱分析方法，提取矿相的微观多重分形谱定量表征值f（α），并分别深度挖掘由f（α）衍生出的对称度特征值Δf、谱宽特征值Δα、容量维特征值D（0）随碱度变化的迁移规律和随矿相检测位置变化的迁移规律。研究结果表明，矿相微观视觉特征在HSV颜色空间上呈现的颜色特征未在碱度变化和位置变化上存在显著差异性；矿相微观多重分形谱分析中，Δf、Δα、D（0） 3个特征值在碱度变化和位置变化上有显著的差异性，可以很好地表征碱度迁移规律和位置迁移规律。     

Ergonomic mismatch between students anthropometry and university classroom furniture

University students spend most of their time in classrooms, mostly in a sitting position. Prolonged sitting on ill-fitted furniture and the resulting bad posture is making students suffer from different musculoskeletal disorders (MSDs). This study evaluates the potential mismatch between furniture dimensions and anthropometric measurements. To determine potential mismatch, 13 anthropometric measurements of 550 students and 11 dimensions of two types of classroom furniture (mounted-desktop and chair-with-table) were measured and then compared. Additionally, chi-square test was performed to compare the relation between anthropometry and relevant furniture dimensions. Results showed that a significant number of mismatches emerged between anthropometric measurements and furniture dimensions. For both types of furniture, seat height was too high and seat depth was too deep. Moreover, for mounted desktop, desk height is almost appropriate for all students whereas for chair and table, it was too high for the males. These circumstances may lead to increase discomfort and increase MSDs problems among all students. It can be concluded that the dimensions of both types of classroom furniture were not appropriate for users according to anthropometric measurements. This analysis recommends the measurements of furniture dimensions based on participants’ anthropometric measurements to avoid or minimise discomfort and MSDs problems.     

单自由度八杆仿生机构构型与尺度同步设计方法

单自由度八杆仿生机构杆长参数较多，是仿生机器人领域研究的难点之一。为提高设计效率，提出一种构型与尺度同步设计方法。在选定的运动链和机架的基础上，以不等式形式分步给出运动可行性及外形约束条件，使得上一步的杆长可作为下一步求解的已知值。通过该过程，在得到八杆仿生机构构型的同时，快速得到所有杆长的初步可行域。循环上述过程，逐步缩小约束条件的范围，可使得八杆机构的杆长快速接近目标值。在此基础上，分类讨论了连杆搭接顺序、约束条件及基本运动链的差异对求解难度及构型结果的影响。利用所提出的单自由度八杆仿生机构的设计方法，在对初始条件进行合理选取的前提下，可在初步得到构型的同时将杆长限定在较小范围内，实现了构型与尺度的同步设计。该方法还可应用于其他单自由度机构的设计当中，具有较好的借鉴意义。     

Clustering adaptive canonical correlations for high-dimensional multi-modal data

Multi-modal canonical correlation analysis (MCCA) is an important joint dimension reduction method and has been widely applied to clustering tasks of multi-modal data. MCCA-based clustering is usually dimension reduction of high-dimensional data followed by clustering of low-dimensional data. However, the two-stage clustering is difficult to ensure the adaptability of dimension reduction and clustering, which will affect the final clustering performance. To solve the issue, we propose a novel clustering adaptive multi-modal canonical correlations (CAMCCs) method, which constructs a unified optimization model of multi-modal correlation learning and clustering. The method not only realizes discriminant learning of correlation projection directions under unsupervised cases, but also is able to directly obtain class labels of multi-modal data. Additionally, the method also realizes out-of-sample extension in class labels. Solutions of CAMCCs are optimized by an iterative way, and we analyze its convergence. Extensive experimental results on various datasets have demonstrated the effectiveness of the method.