基于纸浆纤维的贵重物品内包装塑造系统研究

为解决贵重物品与其内包装“契合度”不高的问题，提出基于纸浆纤维的贵重物品内包装塑造系统。系统通过三维扫描获取待包装物品的点云信息，经主控计算机进行数据处理，以下位机为执行中枢，辅之其他外部设备，利用纸浆纤维为贵重物品塑造“量身定制”的内包装，提升内包装契合度，增强保护效果，绿色环保，安全稳定。     

Moulded pulp products manufacturing with thermoforming

For an effective optimization of pulp thermoforming and of the moulded pulp products manufactured by this process, a full understanding of the process physics combined with full knowledge of the pressing equipment is necessary. For this reason, in this Addendum, we clarify how the process parameters “Holding time,” “Vacuum time,” “Cycle time,” and “Temperature” were interpreted and subsequently defined for the analysis of the process and product‐related outputs of the thermoforming experiments.     

木片筛余物高得率半化学法清洁制浆技术研究

以太阳纸业备料车间木片筛选碎料（筛余物）为原料，对其烧碱法半化学制浆的实验室工艺和生产试验进行了研究。结果表明，筛余物采用半化学法制浆可获得较高得率和环压强度的纸浆，且用碱量对纸浆性能有显著影响。相对8%NaOH （相对于绝干原料）化学预处理，采用14%NaOH化学预处理结合两段浆浓22%的高浓磨浆工艺，所制半化学浆抄造浆张的裂断长和环压指数分别达2.89 km和9.76 N·m/g，是前者的1.9倍和1.2倍，而且优于现用国内OCC废纸浆抄造浆张；生产试验得到的浆张性能指标与实验室相吻合，其中紧度和环压强度分别达到GB/T 13023—2008瓦楞芯（原）纸AA级和A级优等品要求。     

两台竹浆碱回收锅炉NOx、SO2排放的探讨

根据两台竹浆碱回收锅炉的实际运行情况,对其结构与运行对污染物排放的影响进行了比较、分析。     

超高效液相色谱串联质谱法测定烟草中的噁霉灵残留

为降低烟草中噁霉灵检测中的基质干扰，提高检测灵敏度和和稳定性，通过试验建立了以QuEChERS为样品前处理方法、液相色谱串联质谱仪为检测仪器的烟草中噁霉灵残留检测方法。样品加水浸润后，经丙酮提取、盐析试剂包除水、石墨化炭黑除杂后，采用Agilent ZORBAX 300SB-C8液相色谱柱（2.1 mm×100 mm，1.8 μm）分离，甲醇-水程序洗脱，ESI雾化，串联质谱MRM检测。结果发现，该方法在0.0025~0.0500 mg/L范围内线性良好，决定系数r²=0.9996，定量检测限1.06 μg/L，回收率在90.8%~92.0%之间，相对标准偏差为5.1%。运用该方法测定烟草中的噁霉灵，操作简单，检测精度高，满足CORESTA对烟草农残检测的要求。     

Bond strength and adaptation of pulp capping materials to dentin

This study evaluated the shear bond strength (SBS) and internal marginal adaptation of pulp‐capping materials to dentin. Flat occlusal deep dentin surfaces were produced and randomly assigned to two groups (sound or artificial caries‐affected dentin). The specimens in each group were assigned to one of seven subgroups according to the materials used: Biodentine, Theracal LC, Ultra‐Blend plus, Calcimol LC, ApaCal ART, EQUIA Forte, and Ionoseal. Buildups (3‐mm inner diameter and 2‐mm deep) were made over the dentin surfaces. The bonded specimens were tested under shear forces at a crosshead speed of 0.8 mm/min and fracture modes were determined using a stereomicroscope at 25× magnification. The materials were applied to the pulp floor of prepared Class I cavities and then the cavities were restored with composite resin. Restored molar teeth were subjected to 5,000 thermocycles and sectioned in a bucco–lingual direction. Resin replicas were made to determine the adaptation at the pulp floor with scanning electron microscopy. Significant differences were determined among both bond strengths and gap formations of the materials. EQUIA Forte applied to both dentin substrates had a significantly higher SBS than the other materials. The bond strength of each material was not influenced by the dentin condition. Biodentine (3.03%), EQUIA Forte (7.83%), and Theracal LC (13.37%) had lower gap formations compared to other materials but were not significantly different from each other.     

设备自诊断系统与数采管控体系论述

近年来,行业提出将信息化与产业的融合创新放在行业高质量发展的重要位置,提出由“制造”向“智造”转变。当前针对烟机设备的主要信息化手段多集中在设备状态监控、故障频次排序、设备故障原因等功能上的整合,主要是对烟机设备上原有各项数据进行后续的数据处理来实现。但是单纯依赖数据处理的方法无法及时有效地甄别出设备本体及工艺质量参数的异常。提出利用自诊断系统与数采管控体系弥补设备本体管控系统的短板,提升自动化生产的综合管控能力,并提出大数据应用方面的设想。     

烟用香精香料中奎尼酸的测定

建立以高效液相色谱测定烟用香精香料中奎尼酸含量的方法。以质量分数50%的乙醇为萃取剂,样品经振荡提取后,采用C18色谱柱分离和二极管阵列检测器测定。结果表明,奎尼酸在1.0～250.0 mg/L范围内线性关系良好,相关系数为0.999,检出限为3.12μg/g,加标回收率为92.6%～105.1%,相对标准偏差（RSD）〈5%（n=5）。所建立的方法具有灵敏度高、准确性好、操作简便等优点,适合于烟用香精香料中奎尼酸的批量测定。     

Simulation analysis of producing xylitol from hemicelluloses of pre-hydrolysis liquor

The pre-hydrolysis liquor (PHL) of the kraft-based dissolving pulp production process is currently sent to the recovery boiler and incinerated. However, PHL contains about 5–8% lignocelluloses that can be utilized in the production of value-added chemicals. In this study, a process for producing xylitol from hemicelluloses in PHL is developed. This process involves several acidification, neutralization, adsorption (along with reactivation) and evaporation stages. The mass balance indicates that 533 kg/h xylitol (with 99% purity), 187 kg/h lignin, 806 kg/h basic ferric acetate, and 1600 kg/h gypsum can be produced from 41,670 kg/h PHL. The energy balance shows that the evaporators are the largest consumers of energy, while the reactivation kiln, acidification, neutralization, and precipitation processes generate some heat. Overall, 41% conversion of xylose to xylitol is achieved.     

Preliminary Studies on Furfural Production from Lignocellulosics

This study focused on the production of furfural from agricultural and industrial biomass residues by a hydrodistillation process. Corncobs, sugarcane bagasse, and eucalypt wood were treated with sulfuric, hydrochloric, and phosphoric acids as catalysts, with different acid concentrations (1.5 to 5.2 mol.L ^?1). In addition, the eucalypt liquor from the auto-hydrolysis, kraft-dissolving pulp production process was also investigated as a source of furfural, using sulfuric and hydrochloric acids as a catalyst (0.9 and 3.9 mol.L ^?1) . Furfural yields of 30.2, 25.8, and 13.9% were achieved for corncob, sugarcane bagasse, and eucalypt wood, respectively, on the basis of biomass dry weight. The efficiency of conversion from pentose to furfural using eucalypt liquor from the auto-hydrolysis kraft process was 71.5% using HCl 3.9 mol.L ^?1 . Due to the presence of a high amount of pentose, corncob produced the highest amount of furfural, followed by sugarcane bagasse and then eucalypt wood.