Optimized Biocatalytic Synthesis of 2-Selenopyrimidine Nucleosides by Transglycosylation**

Selenium-modified nucleosides are powerful tools to study the structure and function of nucleic acids and their protein interactions. The widespread application of 2-selenopyrimidine nucleosides is currently limited by low yields in established synthetic routes. Herein, we describe the optimization of the synthesis of 2-Se-uridine and 2-Se-thymidine derivatives by thermostable nucleoside phosphorylases in transglycosylation reactions using natural uridine or thymidine as sugar donors. Reactions were performed at 60 or 80 °C and at pH 9 under hypoxic conditions to improve the solubility and stability of the 2-Se-nucleobases in aqueous media. To optimize the conversion, the reaction equilibria in analytical transglycosylation reactions were studied. The equilibrium constants of phosphorolysis of the 2-Se-pyrimidines were between 5 and 10, and therefore differ by an order of magnitude from the equilibrium constants of any other known case. Hence, the thermodynamic properties of the target nucleosides are inherently unfavorable, and this complicates their synthesis significantly. A tenfold excess of sugar donor was needed to achieve 40−48 % conversion to the target nucleoside. Scale-up of the optimized conditions provided four Se-containing nucleosides in 6–40 % isolated yield, which compares favorably to established chemical routes.     

S/Se dual-doping promotes the formation of active Ni/Fe oxyhydroxide for oxygen evolution reaction of (sea)water splitting

Surface reconstruction produces metal oxyhydroxide (1OOH) active sites, and promoting surface reconstruction is essential for the design of OER electrocatalysts. In this paper, we reported that a large amount of active NiFeOOH was generated in-situ on the surface of nickel-iron sulfide selenide, thus exposing more active sites and efficiently catalyzing OER. In 1 M KOH solution, NiFeOOH(S,Se) achieves an ultra-low overpotential of 195 mV at the current density of 10 mA cm^?2, and the Tafel slope is only 31.99 mV dec^?1, showing excellent catalytic performance. When the current density is 100  mA cm^?2, the over-potential of NiFeOOH(S,Se) in KOH + seawater solution is 239 mV, which is almost equivalent to 231 mV in KOH solution. The excellent OER stability of the NiFeOOH(S,Se) catalyst in alkaline electrolytes was confirmed, and the overpotential did not change significantly after 4 days of testing in KOH + seawater solution.     

Biofortification with selenium and lithium improves nutraceutical properties of major winery grapes in the Midwestern United States

Enriching the micronutrients, selenium (Se) and lithium (Li), in grapes to improve their nutraceutical properties were implemented by foliar application of organic fertiliser rich in Se and Li onto five grape cultivars. The effects of this biofortification on vine vigour, fruit quality, overall micronutrients and phenolic compounds also were investigated. Agronomic biofortification was found greatly increased the Se and Li content in the whole grape by multiple times, meanwhile it did not significantly affect the vine vigour and fruit quality of grapes. However, the biofortification did impact the Ionome (including all the mineral nutrients and trace elements) and phenolic compounds in grapes and this varied among cultivars. This study demonstrated foliar spray of organic Se/Li fertiliser was a very effective strategy to biofortify these micronutrients in grape berries, particularly in the skin, and therefore might be a promising strategy to increase the consumption and awareness of these grapes.     

The influence of brewing method on bioactive compounds residues in spent coffee grounds of different roasting degree and geographical origin

The content of bioactive compounds in spent coffee grounds (SGC) was studied. SGC were obtained from Coffea arabica beans of different roasting degrees (light and dark) and different geographical origins (Nicaragua, Columbia and Mexico) processed using four brewing methods (mocha, filtered, drip and infusion). The highest caffeine and chlorogenic acid contents were determined in filtered spent coffee extracts. All extracts of light roasted spent coffee grounds showed lower browning index levels in comparison to that from dark roasted spent coffee grounds. Generally, the highest content of total polyphenolic compounds and highest antioxidant capacity were determined in extracts prepared in drip. In conclusion, the results obtained in this study indicate that the spent coffee grounds produced of domestic levels, especially those obtained from filter coffeemaker, could be considered as a good source of natural antioxidants.     

瞬态闭锁试验在0.13 μm大规模集成电路中引起的潜在损伤

瞬态剂量率辐射试验会引起集成电路发生损伤或失效，其原因至少有两种：闭锁大电流引起的电路内部金属互连熔融；累积电离总剂量引起的氧化层电荷造成阈值电压偏移。本文以一种0.13 μm体硅CMOS处理器为对象，研究了瞬态剂量率和稳态电离总剂量辐射效应规律。结果表明：瞬态剂量率闭锁效应对处理器造成了显著的潜在损伤，导致其总剂量失效阈值从1 030 Gy(Si)降低至600 Gy(Si)。研究结论对于大规模集成电路的可靠性评估和指导辐射加固设计有重要参考意义。     

新时代长江鱼类多样性保护的思考

长江是我国第一大河流,是世界生物多样性的热点区域,也是我国鱼类多样性最高的河流之一。在介绍长江鱼类主要生态习性生境条件的基础上,分析了导致鱼类多样性下降的主要因素——生境丧失和过度捕捞,并简要总结了目前已采取的保护措施及存在的问题,提出了关于新时期长江鱼类多样性保护的思考与建议:①建立以流域管理机构牵头,相关部门和地方共同组建流域生态保护机制;②有计划开展支流及通江湖泊的生态恢复,使支流的小水电逐步退出,使原本的通江湖泊恢复自然江湖关系;③提高民众环保意识,积极建立全流域禁捕机制和休闲垂钓机制,并让垂钓者成为渔政的管理者和监督者。     

总变差模型在书画打印宣纸印刷质量预测中的应用

为了建立适用于书画打印宣纸印刷质量的预测模型,本研究测量了14种书画打印宣纸的粗糙度、白度、不透明度、定量、光泽度和针对宣纸特别设定的帘纹深浅以及帘纹疏密度等表面物理参量,并在相同条件下,使用喷墨打印设备输出并测量印品色度值,利用总变差模型构建去除帘纹色差的测定方法,得到与人眼视觉特征相符的色差。运用GRNN广义回归神经网络结合书画打印宣纸表面物理参量与宣纸去帘纹后的色差值,建立预测模型。结果表明,该模型能够在仅测量书画打印宣纸表面物理参量的情况下,便能较为准确地预测书画打印宣纸印刷质量,为书画打印宣纸印刷前的选纸工作提供指导依据。     

水质中总硬度的检测方法

目的建立快速检测水质总硬度的检测方法。方法基于工厂实际生产需求,采用快速试纸条方法对工厂内使用的配料用水、清洗用水、源水的总硬度进行检测,并通过方法优劣性分析、适用性验证、准确性验证、精密度验证等维度进行分析总结,同时与国标方法进行结果差异对比。结果通过对4个维度的实验证明,快速试纸条法检测结果与国标方法对比无显著差异。结论本研究中试纸条快速检测方法,可以满足生产过程中配料用水、清洗用水、源水的质量检测。     

平板计数法与纸片法检测食品微生物菌落总数的比较研究

目的找出平板倾注法与纸片法2种检测食品菌落总数方法之间的相关性,判断2种方法有无显著性差异。方法样品处理按GB 4789.2-2016《食品安全国家标准食品微生物学检验菌落总数测定》进行处理,平板倾注法取样品稀释液接种平皿倾注琼脂、纸片法取样品稀释液接种细菌计数纸片。用上述2种方法对市场上随机抽取30份饼干及糕点和2份质控样品进行菌落总数检测,最后做统计学分析(t-test)。结果倾注法与纸片法检测结果无显著差异(P0.05)且对不同菌落数区间(0～100CFU/g、100～1000CFU/g、1000～10000 CFU/g)都适用。2份质控样品评价结果为满意。结论纸片法可用于食品菌落总数的快速检测,缩短检测流程,提高工作效率。     

基于自回归谱外推的全聚焦成像分辨力提升

针对相邻缺陷全聚焦超声成像混叠问题，结合低阶、宽有效频带自回归谱外推方法，压缩超声波时域脉冲宽度，实现亚波长级全聚焦（Total focusing method，TFM）成像分辨力。建立碳钢试块模型，设置两个中心间距1.8 mm，直径1.3 mm圆孔，选用中心频率2.25 MHz，32阵元相控阵探头采集全矩阵数据。针对全矩阵数据，选择自回归阶数为2，信号频谱最大幅值下降14 dB为有效频带，建立自回归模型并外推有效频带外的高频与低频成分，随后对全矩阵数据进行延迟叠加处理和TFM成像。仿真结果表明，低阶、宽有效频带自回归谱外推处理方法具有较高的鲁棒性和准确性，TFM成像后可有效分离中心间距0.7λ（λ为超声波长）圆孔，保留缺陷横向位置信息的同时，定位误差不超过0.73%。对碳钢试块中相同位置及尺寸的圆孔进行试验验证，定位误差不超过1.06%，有效地提高TFM成像分辨力。