往复活塞式压缩机活塞杆温度高故障分析及改造

针对2台2D40型空气压缩机在实际试机过程中,活塞杆温度过高,导致连锁报警,压缩机不能正常工作的问题进行了详细的故障原因分析;对压缩机技术性能参数进行介绍;对压缩机的损伤情况进行说明并找到改造方案,解决机组运行中活塞杆温度过高的问题,从而提高机组的运行效率,使机组运行安全、稳定。     

A tool for mass transfer evaluation in packed-bed columns for chemical engineering students

This paper presents a Microsoft Excel tool to calculate liquid-gas mass transfer coefficients in packed towers to support numerical design activities in the courses of Unit Operations for Industrial Process and Sustainable Process Design for the Master’s degree in Chemical Engineering of the University of Naples Federico II (Italy).The Mass Transfer Solver Tool (MT Solver Tool) uses several available models to estimate, separately, the values of liquid and gas mass-transfer coefficients and the wet surface area for 144 random and structured packings of interest for absorption/stripping and distillation processes. In addition, a separate spreadsheet can be used in a user-defined mode, to evaluate the mass transfer coefficients with new packing types or to interpret experimental data when the geometrical and physical characteristics of the packing are known. Eventually, the tool is supplied with a data library, where packing geometry and model fitting parameters can be retrieved.The software is aimed to support students and educators in the Unit Operations for Industrial Process and Sustainable Process Design courses. In particular, this is meant to be an example on how the accuracy of design algorithms adopted in unit operation processes is affected by the use of the underpinning correlations for mass transfer rate or pressure drops. Besides, this is aimed to encourage comparison of different correlations when exact field data are not available. Besides, chemical engineers and researchers interested in packed columns design and modelling data may also benefit from the utilization of the software. The MT Solver Tool was introduced to students in a dedicated tutorial lesson after lecturers on packed column design algorithms for distillation, absorption and stripping. Most of the students of the course participated to a group training aimed to simulate the design of an absorption column supported by the MT Solver Tool providing feedback on its application.After the training, an anonymous survey was proposed to the students to monitor the approval rating of the proposed activity and the use of the MT Solver Tool software to support numerical calculations.     

新型AMBBR-MBBR-MBR工艺处理紫外线吸附剂厂废水

根据传统工艺处理紫外线吸附剂厂UV-P废水中高级氧化作为预处理成本高,单一A₂O生化工艺出水不稳定,并且出水污染物浓度高等缺点,首先采用零价铁强化水解和预曝气作为预处理,以新型AMBBR-MBBR-MBR工艺进行处理。工程MBBR采用三维多孔泡沫陶瓷填料为生物载体,MBR采用Si O₂平板陶瓷膜。长期调试运行效果表明,出水水质优于≤城镇污水处理厂污染物排放标准≥GB 18918-2002表1中一级A标准,即COD<50 mg/L,氨氮<5 mg/L,总氮<15 mg/L,硝基苯<2.0 mg/L,挥发酚<0.5 mg/L,苯胺类<0.5 mg/L等。水处理运行费用为4.9元/m³。     

Improvement of quantitative analysis of molybdenum element using PLS-based approaches for laser-induced breakdown spectroscopy in various pressure environments

An experimental setup has been designed and realized in order to optimize the characteristics of laser-induced breakdown spectroscopy system working in various pressure environments. An approach combined the normalization methods with the partial least squares(PLS) method are developed for quantitative analysis of molybdenum(Mo) element in the multi-component alloy,which is the first wall material in the Experimental Advanced Superconducting Tokamak. In this study, the different spectral normalization methods(total spectral area normalization,background normalization, and reference line normalization) are investigated for reducing the uncertainty and improving the accuracy of spectral measurement. The results indicates that the approach of PLS based on inter-element interference is significantly better than the conventional PLS methods as well as the univariate linear methods in the various pressure for molybdenum element analysis.     

多晶硅生产中残液搅拌罐密封结构的改造

在处理多晶硅生产中产生的残液时,残液搅拌罐填料密封出现泄漏,针对此问题提出了优化措施,达到了预期效果。     

掺杂EBS润滑剂的粉末冶金铝合金脱脂工艺研究

文章通过冷压-烧结制备了掺杂EBS润滑剂的粉末冶金铝合金,比较了单/多温段脱脂工艺优劣,发现多温段脱脂优于单温段脱脂,脱脂更彻底,但由于气体流量不能无限大,导致气氛脱脂得到的样品碳含量无法达到碳剩余理论值0.02%。研究了真空脱脂和空气负压脱脂机制,真空脱脂可使得EBS热分解的气态有机物和灰分从压坯表面逸出,并被及时带出炉外,最终合金碳含量接近碳剩余理论值0.02%；空气负压脱脂可使得残余碳被氧化逸出,脱碳更彻底,使样品碳含量低于碳剩余理论值。研究了脱脂工艺对合金力学性能的影响,真空脱脂合金力学性能优于气氛脱脂,相对密度最大为97.86%,拉伸强度最大为218.06MPa,接近未添加润滑剂合金的力学性能；空气负压脱脂虽然可使碳含量更低,但因脱脂过程中样品暴露在空气中,使得原料粉末也被氧化,导致最终的合金力学性能严重下降。     

单相硼化物的制备及摩擦磨损性能研究

为了深入研究渗硼层中硼化物的性能，采用真空感应熔炼法制备单相硼化物材料。观察分析制备的硼化物微观组织，测试其力学性能。采用MMU-5G型销-盘式摩擦磨损试验机，在干摩擦条件下，研究了不同载荷下单相硼化物的摩擦学性能，观察其磨损表面形貌特征，探讨其磨损方式。结果表明：制备的硼化物为单一相，试样纯度高，试样的平均显微硬度为HV2065，平均断裂韧性值为1.68 MPa·m1/2；硼化物的断口处没有宏观的塑性变形，断口齐平光亮，表现为脆性断裂特征；干摩擦条件下随着载荷从10 N增加到30 N，硼化物的摩擦因数先降低后增加，20 N载荷时达到最小值，而其磨损量随着载荷的增加不断上升；随着载荷从10 N增加到30 N，磨损表面的粗糙度先逐渐上升后急剧上升； 10~20 N载荷下，硼化物的磨损以磨粒磨损为主，而25~30 N载荷下，硼化物的主要磨损方式从磨粒磨损转变为脆性破损。     

工艺参数对6061-T6铝合金真空扩散焊接接头形貌和性能的影响

在不同工艺参数下对化学清洗去除表面氧化膜的6061-T6铝合金进行真空扩散焊接,研究了焊接温度(500~560℃)、焊接压力(1.0~5.0MPa)和保温时间(0.5~3h)对焊接接头界面形貌和剪切强度的影响,得到了优化工艺参数。结果表明:随着焊接温度的升高、焊接压力的增大和保温时间的延长,接头焊缝变窄并最终消失,剪切强度和焊合率增大;但当保温时间延长到3h时,焊缝附近晶粒发生粗化,导致剪切强度降低,且接头发生较大变形;不同工艺参数下接头的剪切断裂形式均为脆性断裂;较优的真空扩散焊接工艺参数为焊接温度540℃、保温时间2h、焊接压力4.0MPa。     

合金组元过量焓与真空蒸馏气液相平衡的关联

基于Wilson方程，通过组元的摩尔体积和无限稀偏摩尔过量焓获得Wilson方程的相互作用参数，预测了Sn-X（X=Bi, Cd, Ga, Ge, In, Pb, 和 Sb）体系在5 Pa时的VLE（气-液平衡）相图。结果表明预测值与实验数据具有很好的一致性，在缺乏组元活度的情况下，该方法可以有效预测合金真空蒸馏的气液平衡，为粗金属的真空分离与提纯提供理论指导。