Impact of TiO2 nanoparticles and nanowires on corrosion protection performance of chemically bonded phosphate ceramic coatings

The impact of the addition of TiO₂ nanoparticles and nanowires on the morphology, phase characteristics, contact angle, and electrochemical performance of chemically bonded phosphate ceramic coatings (CBPCs) was investigated. The chemical composition and surface morphology of the TiO₂ nanoparticle and nanowire modified with and without (heptadecafluoro-1,1,2,2-tetradecyl) trimethoxysilane were characterized. Results indicated that the hydrophobic –CF₂– and –CF₃ groups were successfully introduced into the TiO₂ nanoparticles and nanowires after modification. Corrosion resistance of CBPCs with TiO₂ was evidently improved compared with that without TiO₂. Such improvement was mainly due to the combined effects of low surface energy materials and micro/nano structures. In addition, CBPCs with TiO₂ nanowires exhibited higher hydrophobicity and corrosion resistance than those with TiO₂ nanoparticles because of the special columnar structure of the nanowires.     

Application of artificial neural network method to predict the breakage properties of PGE bearing chromite ore

In the present investigation, systematic grinding experiments were conducted in a laboratory ball mill to determine the breakage properties of low-grade PGE bearing chromite ore. The population balance modeling technique was used to study the breakage parameters such as primary breakage distribution (B_{i, j}) and the specific rates of breakage (S_i). The breakage and selection function values were determined for six feed sizes. The results stated that the breakage follows the first-order grinding kinetics for all the feed sizes. It was observed that the coarser feed sizes exhibit higher selection function values than the finer feed size. Further, an artificial neural network was used to predict breakage characteristics of low-grade PGE bearing chromite ore. The predicted results obtained from the neural network modeling were close to the experimental results with a correlation of determination R² = 0.99 for both product size and selection function.     

Investigation of the microwave dielectric properties of the Li4x/3Zn2−2xTi1+2x/3O4 system by P–V–L theory and vibration spectroscopy

Li_4x/3Zn_2–2xTi_1+2x/3O₄ microwave dielectric ceramics with a spinel phase were prepared via a high-temperature solid-phase method. P–V–L theory, vibration spectra, and XPS were utilized to establish the links between the intrinsic and extrinsic factors and the microwave dielectric properties. According to the characterization, the change in permittivity (ε_r) was ascribed to the increase in the average bond ionicity of Ti–O(Af_iTi-O) and the polar mode of the lattice vibration; the change in quality factor(Q × f) resulted from the change in the Ti–O lattice energy (AU_Ti-O) and existence of oxygen vacancy; the increase in temperature coefficient of the resonance frequency (τ_f) was triggered by the increase in the Ti–O bond energy. The Li_0.6Zn_1.1Ti_1.3O₄ ceramics (x = 0.45) sintered at 1125 °C finally obtained optimal microwave dielectric constants of ε_r = 17.3, Q × f = 76,318 GHz and τ_f = -58 ppm/°C.     

强变形工艺对2519A铝合金组织与性能的影响

通过硬度测试、拉伸性能测试、透射电镜观察等分析手段研究了不同强变形工艺下2519A铝合金的力学性能与微观组织。结果表明,经50%的冷轧变形和165 ℃人工时效后,2519A合金的力学性能明显提高,其抗拉强度、屈服强度和伸长率分别为522 MPa、468 MPa和8.5%。而在冷变形前添加165 ℃×2 h预时效处理,合金的力学性能进一步提高,其抗拉强度、屈服强度和伸长率分别达到535 MPa、497 MPa和8%。预时效处理可以提高合金中θ′相的密度,使析出相分布更加均匀,有助于提高合金的力学性能。     

Do economic regulatory agencies matter to private-sector involvement in water utilities in developing countries?

This paper suggests that, for developing countries, the creation of economic regulatory agencies, separate from the ministry in charge of water and sanitation, may not be a necessary or sufficient condition to stimulate large scale private involvement (PPPs) in the sector. The odds of an impact are higher for Latin American countries than other regions and for countries with higher income levels. They are also better when inflation is high. At the margin, the odds are unrelated to the contract type, except for greenfield projects, for which they may be contraindicated.     

一种基于全变分技术和Lp伪范数的椒盐噪声去除方法

针对传统各向同性全变分（Isotropy total variation，ITV）去噪算法容易导致图像边缘模糊、不易保持图像细节信息等问题，提出一种基于L _p 伪范数和各向同性全变分的图像去噪方法。该方法将L _p 伪范数代替ITV模型中的L ₁范数，利用交替方向乘子算法（Alternating direction method of multipliers, ADMM）将能量泛函拆解成若干个子问题，并将差分算子视为卷积算子；然后引入卷积定理和快速傅里叶变换(Fast Fourier transform, FFT)提高算法运算效率；最后通过Matlab进行仿真实验，运用图像质量的客观和主观评价方法进行评价分析。结果表明，本文方法能够较好地保留图像的边缘特性，有效提升去噪效果。     

The alginate fermentation strain Pantoea sp. F16-PCAi-T3P21 and ethanol production

Bio-ethanol production from algae is a promising way to help solve the energy problem. Alginate is a major component of algae, but it cannot be utilized by existing ethanol fermentation microorganisms. In order to improve the utilization rate of brown algae, high alginate fermentation strains should be obtained. In this research, strains for algae fermentation were got from several experiments. The ethanol yield of strain A was the highest, which was 0.095 g/g (ethanol to alginate). The identification of strain A was carried out and it was 99% identical to Pantoea sp. F16-PCAi-T3P21. Fermentation experiments with different substrates were carried out, such as laminaran, mannitol, L. japonica and acid hydrolysate of L. japonica, and the ethanol yield rate of L. japonica acid hydrolysate was the highest, which reached 0.17 g/g ethanol to L. japonica. It showed that strain A can converse alginate to ethanol in a relatively high yield rate, and might be a promising strain with L. japonica as the substrate, we believe more research should be carried out on this strain.     

Effect of ultrasonication treatment and fermentation by probiotic Lactobacillus plantarum strains on goat milk bioactivities

In the present research, the effects of continuous ultrasound treatment (100 W, 30 kHz; 0%, 30%, 60% and 90% amplitudes, 15 min) and fermentation process (37°C, 24 h) on the growth of Lactobacillus plantarum LP3 and LU5 strains and bioactive properties (peptide content, α-amylase and α-glucosidase inhibition, anticancer and antioxidant activities and exopolysaccharide content) of goat milk were investigated. According to our results, the ultrasonication of milk up to 60% amplitude promoted the growth of Lactobacillus strains and enhanced the bioactive properties compared with control during fermentation, while, the ultrasonication at 90% amplitude had negative effects on the mentioned parameters. Exopolysaccharide content, α-amylase inhibition, α-glucosidase inhibition, antioxidant activity and anticancer activity of treated samples at 60% amplitude at the end of fermentation in comparison to its beginning were increased 18.09, 12.79, 12.44, 9.4 and 1.92 folds, respectively. Also, the increase of assayed characteristics was found strain-dependent, so that L. plantarum LP3 was more effective than LU5 strain.     

Effect of cutting process on the stress corrosion susceptibility of AISI 304L stainless steel

During manufacturing of a component, cutting, turning, grinding, and milling operations are inevitable and these operations induce surface residual stresses. In this study, it is shown that, depending on the process employed for cutting, residual stresses generated at the cut surfaces can vary widely and they can, in turn, make the cut surfaces of austenitic stainless steel (SS) prone to stress corrosion cracking (SCC). An austenitic SS 304L plate was cut using three different procesess: bandsaw cutting, cutting using the cut-off wheel, and shearing. Surface residual stress measurement using the X-ray diffraction (XRD) technique is carried out close to the cutting edges and on the cross-section. SCC susceptibility studies were carried out as per ASTM G36 in 45% boiling magnesium chloride solution. Optical microscopic examination showed the presence of cracks, and confocal microscopy was used to measure the depth of cracks. The study confirmed that high tensile residual stresses present in the cut surfaces produced by cut-off wheel and shear cutting make the surfaces susceptible to SCC while the surfaces produced by bandsaw cutting are resistant to SCC. Hence, it is shown that there is a definite risk of SCC for product forms of austenitic SS with cut surfaces produced using cutting processes that generate high tensile residual stresses stored for a long period of time in a susceptible environment.