振动监测系统的可调增益技术与实现

文章设计了一种具有可调增益功能的振动监测系统。首先从监测层和测量层两个方面提出了振动监测系统的整体框架,之后给出了硬件系统和软件系统的设计方法及软件实现代码,利用控制芯片和可调增益放大器,在监测系统中整合了一套可根据采集信号幅值大小调整增益的数据采集装置;利用模拟信号发生器对不加增益和设置可调增益之后的两种信号进行了对比分析,并在汽轮发电机组实际工况下进行了振动信号采集。结果表明,具备可调增益功能的振动监测系统可有效提高采集信号的信噪比,提高汽轮发电机组的振动监测能力。     

Sodium and ultrafiltration profiling in hemodialysis: A long-forgotten issue revisited

Sodium and ultrafiltration profiling are method of dialysis in which dialysate sodium concentration and ultrafiltration rate are altered during the course of the dialysis session. Sodium and ultrafiltration profiling have been used, commonly simultaneously, to improve hemodynamic stability during hemodialysis. Sodium profiling is particularly effective in decreasing the incidence of intradialytic hypotension, while ultrafiltration profiling is suggested to decrease subclinical repeated end organ ischemia during dialysis. However, complications such as increased interdialytic weight gain and thirst due to sodium excess have prevented widespread use of sodium profiling. Evidence suggest that different sodium profiling techniques may lead to different clinical results, and preferring sodium balance neutral sodium profiling may mitigate adverse effects related to sodium overload. However, evidence is lacking on the long-term clinical outcomes of different sodium profiling methods. Optimal method of sodium profiling as well as the utility of sodium/ultrafiltration profiling in routine practice await further clinical investigation.     

Full and reduced-order H∞ filtering of Takagi–Sugeno fuzzy time-varying delay systems: Input–output approach

This article addresses the issue of delay-dependent H_∞ filtering design for TakagiŮSugeno fuzzy time-varying delay systems using the input–output approach. A three-term approximation model has been used to transform the original system into two interconnected subsystems. Since the nonquadratic Lyapunov–Krasovskii functional requires to deal with the membership function's (MF) time derivative, upper-bound inequalities have been added to the obtained conditions. Based on the scaled small gain theorem, nonquadratic Lyapunov–Krasovskii functional approach and considering the bounds of the MF time-derivative, the H_∞ full- and reduced-order filters are designed and then formulated in terms of linear matrix inequalities. Finally, illustrative examples are presented to demonstrate the validity of the proposed methods.     

采用信息增益率的混合入侵检测模型设计

针对现有混合入侵检测模型仅定性选取特征而导致检测精度较低的问题，同时为了充分结合误用检测模型和异常检测模型的优势，提出一种采用信息增益率的混合入侵检测模型.首先，利用信息增益率定量地选择特征子集，最大程度地保留样本信息；其次，采用余弦时变粒子群算法确定支持向量机参数构建误用检测模型，使其更好地平衡粒子在全局和局部的搜索能力，然后，选取灰狼算法确定单类支持向量机参数构建异常检测模型，以此来提高对最优参数的搜索效率和精细程度，综合提高混合入侵检测模型对攻击的检测效果；最后，通过两种数据集进行仿真实验，验证了所提混合入侵检测模型具有较好的检测性能.     

On monitoring the process mean of autocorrelated observations with measurement errors using the w-of-w runs-rules scheme

Runs-rules have been widely used since the 1950s in industrial and nonindustrial process monitoring applications to improve the performance of basic and other traditional monitoring schemes. However, none of the studies on runs-rules have accounted for a process with a combined effect of measurement errors and autocorrelation. Hence, in this paper, the use of the w-of-w runs-rules to improve the performance of the Shewhart $\overline{X}$ scheme using an additive model with a constant variance and a first-order autoregressive model is proposed. To reduce the combined negative effect of measurement errors and autocorrelation, we implement a sampling strategy based on rational subgroups in which (a) multiple measurements per item are taken (instead of a standard single measurement) and (b) non-neighboring observations are gathered. Moreover, the latter sampling strategy is incorporated into the values of probability elements of a Markov chain matrix which is used to derive some closed-form expressions for the zero- and steady-state run-length distribution. The main finding of this study is that, with respect to some overall performance measures, the proposed scheme outperforms the existing Shewhart $\overline{X}$ scheme by a significant margin. A real-life example is used to illustrate the practical implementation of the proposed scheme.     

The optical spectra characterization of Cr2+:ZnSe polycrystalline synthesized by direct reaction of Zn–Cr alloy and element Se

Cr²⁺:ZnSe materials have attracted much attention as candidates for mid-infrared laser source either in the form of polycrystalline powders, or bulk ceramics, single crystals and nano-materials. In this work, a novel method for synthesizing Cr²⁺:ZnSe polycrystalline by direct reaction of Zn–Cr alloy and element Se (DRAE) was proposed. The zinc alloy containing 0.1 at% Cr was prepared by dissolving Cr in zinc liquid in a closed quartz ampoule. X-ray diffraction (XRD) results showed that the synthesized Cr²⁺:ZnSe polycrystalline was with a Zinc-blend structure. X-ray photoelectron spectroscopy (XPS) spectra showed that there was no un-reacted element of Zn, or Se. Cr²⁺ ions successfully and uniformly doped into ZnSe crystal lattice, which is confirmed by the diffuse reflectance spectrum, Raman spectrum and mid-infrared photoluminescence spectra. Furthermore, the sample showed excellent mid-infrared properties without luminescence quenching in the region 1800–3000 nm, and the decay-time was about 5 μs. The as-synthesized Cr²⁺:ZnSe polycrystalline meets the requirement for the preparation of mid-infrared ceramic or single crystals. These results indicate that the novel strategy of DRAE is valid for the synthesis of other transition metal doped ZnSe materials.     

Parametric study of aluminium alloy fouling in marine environment using RSM technique

ABSTRACT

Fouling is known to be a prominent industrial problem which is greatly affected by parameters like temperature, time and flowrate. The aim of this work was to simulate the fouling process in AA 6061 by developing a model through Minitab 16 and evaluate the models. Box Behnken design of Response surface methodology was applied for modelling and optimization of fouling propensity in artificial sea water. A response surface model was obtained and Analysis of Variance was performed to test the significance of the model. Fouling propensity was found in terms of weight gain. An experimental rig consisting of a recirculating loop mimicking the industrial conditions of fouling was used in the study. SEM analysis shows uneven deposits on the metal surface. Sharp, irregular deposits pressed deep into the metal was observed. The finding of this work would enable us to evaluate the individual and interactive effects of the parameters.     

A review on spindle thermal error compensation in machine tools

Thermal error caused by the thermal deformation is one of the most significant factors influencing the accuracy of the machine tool. Among all the heat sources which lead to the thermal distortions, the spindle is the main one. This paper presents an overview of the research about the compensation of the spindle thermal error. Thermal error compensation is considered as a more convenient, effective and cost-efficient way to reduce the thermal error compared with other thermal error control and reduction methods. Based on the analytical calculation, numerical analysis and experimental tests of the spindle thermal error, the thermal error models are established and then applied for implementing the thermal error compensation. Different kinds of methods adopted in testing, modeling and compensating are listed and discussed. In addition, because the thermal key points are vital to the temperature testing, thermal error modeling, and even influence the effectiveness of compensation, various approaches of selecting thermal key points are introduced as well. This paper aims to give a basic introduction of the whole process of the spindle thermal error compensation and presents a summary of methods applied on different topics of it.