往复活塞式压缩机活塞杆温度高故障分析及改造

针对2台2D40型空气压缩机在实际试机过程中,活塞杆温度过高,导致连锁报警,压缩机不能正常工作的问题进行了详细的故障原因分析;对压缩机技术性能参数进行介绍;对压缩机的损伤情况进行说明并找到改造方案,解决机组运行中活塞杆温度过高的问题,从而提高机组的运行效率,使机组运行安全、稳定。     

Corrosion behaviour of Mg-Gd-Y-Zn-Ag alloy components with different sizes after cooling

The corrosion behaviour of Mg-6Gd-3Y-1Zn-0.3Ag (wt.%) alloy components with different sizes after cooling was investigated. The alloys in the small components (SC) cooled fast, which were composed of α-Mg matrix and coarse long-period stacking ordered (LPSO) phases. The alloys in the large components (LC) cooled slowly, and there were thin lamellar LPSO phases precipitating inside the grains, except for α-Mg matrix and coarse LPSO phases. The hydrogen evolution test revealed that the corrosion rate of LC sample was higher than that of SC sample. Electrochemical impedance spectroscopy (EIS) test showed that the surface film on LC alloys provided worse protection. The corrosion morphologies indicated that the precipitation of the thin lamellar LPSO phases in LC sample caused severe micro-galvanic corrosion, which accelerated the rupture of the surface film.     

猪胴体冷却降温特性及耗能分析

猪肉是我国消耗量最大的肉类品，尤其是冷鲜猪肉更受人们青睐。猪胴体冷却保鲜加工工艺既要满足优质猪肉的成熟条件，又要保证猪肉的安全卫生。猪胴体冷却温度和降温速度对保证加工工艺合理性和降低耗能都至关重要。在实测数据基础上经过判断、分析提出，在常规0～4 ℃冷却前先在-10～-5 ℃低温快速冷却猪胴体1 h从而更好地保证猪胴体的冷却效果。实验发现：猪胴体开始冷却时，内部温度先有2～4 ℃的升温，然后才会降温，因此需对热负荷计算进行修正；根据两段冷却过程中猪胴体的冷却降温特点，提出了对应的冷量要求，为配备冷却装置提供了依据。     

空间曲线的特征识别与高质量非均匀采样

为避免传统均匀采样方法因忽视曲线重要特征而生成不理想的采样结果,获得给定数量且由特征点和辅助点组成的采样点序列,提出基于特征识别的高质量空间曲线非均匀采样方法.首先使用抛物线插值法得到曲线上所有曲率极大值点和挠率极大值点的近似位置,经筛选后产生特征点,以更好地抓住空间曲线的轮廓特征.然后定义基于弧长、曲率和挠率加权组合的特征函数,并以此自适应地选取曲线上的辅助点.与3种主流采样方法比较的实验结果表明,该方法能够获得更高质量的采样结果且具有更好的实用性,从而进一步改善空间曲线的B样条拟合效果.     

Influence of CO2 inleakage on the slight-alkalization of generator internal cooling water

The slight-alkalization of generator internal cooling water (GICW) is widely used to inhibit the corrosion of hollow copper conductor and thereby ensure the safe operation of the generator. CO₂ inleakage is increasingly identified as a potential security risk for GICW system. In this paper, the influence of CO₂ inleakage on the slight-alkalization of GICW was theoretically discussed. Based on the equilibriums of the CO₂-NaOH-H₂O system, CO₂ inleakage saturation was derived to quantify the amount of the dissolved CO₂ in GICW. This parameter can be directly calculated with the measured conductivity and the [Na⁺] of GICW. The influence of CO₂ inleakage on the slight-alkalization conditioning of GICW and the measurement of its water quality parameters were then analyzed. The more severe the inleakage, the narrower the water quality operation ranges of GICW, resulting in the more difficult the slight-alkalization conditioning of GICW. The temperature calibrations of the conductivity and the pH value of GICW show non-linear correlations with the amount of CO₂ inleakage and the NaOH dosage. This study provides insights into the influence of CO₂ inleakage on the slight-alkalization of GICW, which can serve as the theoretical basis for the actual slight-alkalization when CO₂ inleakage occurs.     

Efficient Flexible M-Tree Bulk Loading Using FastMap and Space-Filling Curves

Many database applications currently deal with objects in a metric space. Examples of such objects include unstructured multimedia objects and points of interest (POIs) in a road network. The M-tree is a dynamic index structure that facilitates an efficient search for objects in a metric space. Studies have been conducted on the bulk loading of large datasets in an M-tree. However, because previous algorithms involve excessive distance computations and disk accesses, they perform poorly in terms of their index construction and search capability. This study proposes two efficient M-tree bulk loading algorithms. Our algorithms minimize the number of distance computations and disk accesses using FastMap and a space-filling curve, thereby significantly improving the index construction and search performance. Our second algorithm is an extension of the first, and it incorporates a partitioning clustering technique and flexible node architecture to further improve the search performance. Through the use of various synthetic and real-world datasets, the experimental results demonstrated that our algorithms improved the index construction performance by up to three orders of magnitude and the search performance by up to 20.3 times over the previous algorithm.     

LBM investigation of a Cu-water nanofluid over various configurations of pipes in the mixed convection flow

Increasing the heat capacity of heat exchangers is a crucial need for modern devices. The thermal conductivity of the usual fluids and the Nusselt (Nu) number of flows containing such fluids are two bottlenecks in the way of increasing heat delivery in the heat exchangers. For this reason, nanofluids have been introduced. The effect of utilizing a Cu-water nanofluid as a coolant of two hot pipes in a square cavity is investigated numerically with a two-component lattice Boltzmann method. The volume fraction of nanoparticles is assumed to be constant (0.03) while the Richardson (Ri) number varies from 0.02 to 20. Results show that the effectiveness of nanoparticles is better observed in the natural convection mode. However, sedimentation is also very probable at high Ri numbers, which significantly reduces the effectiveness of the nanoparticles. Configurations which produce a natural convection stream similar to the forced convection one as well as the configurations with high spacing and hence, low heat stream interactions, are the best choices for a uniform heat rate from the pipes.     

Design of geocell reinforced roads through fragility modeling

Several studies have confirmed the geocell reinforcement system as potential road material. However, there is a wide gap between the number of research studies evaluating the geocell in the laboratory and those dealing with road design methods using the geocell. Due to this gap, the geocell system has not reached its full potential in highways. The present study proposes fragility modeling to design low volume roads by considering the geocell reinforced layer's modulus. A predictive model was developed to estimate the geocell layer's modulus using laboratory and finite element analysis results. The results indicate that geocell reinforcement reduces the stresses on the underlying road layers. The developed fragility approach is then used to examine three road designs for Texas's low volume road involving different geocell reinforced layers. The obtained fragility curves indicate the reliability of each of the three road designs against the traffic load and can thereby assist decision-makers in selecting the optimum design. By designing geocell reinforced roads via fragility modeling, highway officials will be able to integrate any uncertainties in the design inputs and check designs against road performance criteria such as rutting and fatigue cracking, and against decision criteria such as cost, emissions, etc.