广义正交码索引调制系统的性能分析

摘 要：为了提高码索引调制（code index modulation，CIM）系统的传输效率，提出了一种具有更低复杂度的单输入单输出（single input single output，SISO）的广义正交码索引调制（generalized orthogonal code index modulation，GQCIM）系统。CIM 系统使用扩频码和星座符号传输信息，但只能激活两个扩频码索引和一个调制符号。而 GQCIM 系统以一种新颖的方式克服了只激活一个调制符号的限制，同时充分利用了调制符号的正交性，增加扩频码索引以传输更多的额外信息位，提高了系统的传输效率。此外，分析了GQCIM系统的理论性能，推导了误码率性能的上界。通过蒙特卡罗仿真验证了GQCIM系统的性能，对比发现GQCIM系统的理论和仿真性能一致。而且在相同的传输效率下，结果显示GQCIM系统的性能优于同样具有正交性的调制系统，如广义码索引调制（generalized code index modulation，GCIM）系统、CIM系统、码索引调制-正交空间调制（code index modulation aided quadrature spatial modulation，CIM-QSM）系统、码索引调制-正交空间调制（code index modulation aided spatial modulation，CIM-SM）系统、脉冲索引调制（pulse index modulation，PIM）系统。     

Convolutional Neural Network Auto Encoder Channel Estimation Algorithm in MIMO-OFDM System

Higher transmission rate is one of the technological features of prominently used wireless communication namely Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing (MIMO–OFDM). One among an effective solution for channel estimation in wireless communication system, specifically in different environments is Deep Learning (DL) method. This research greatly utilizes channel estimator on the basis of Convolutional Neural Network Auto Encoder (CNNAE) classifier for MIMO-OFDM systems. A CNNAE classifier is one among Deep Learning (DL) algorithm, in which video signal is fed as input by allotting significant learnable weights and biases in various aspects/objects for video signal and capable of differentiating from one another. Improved performances are achieved by using CNNAE based channel estimation, in which extension is done for channel selection as well as achieve enhanced performances numerically, when compared with conventional estimators in quite a lot of scenarios. Considering reduction in number of parameters involved and re-usability of weights, CNNAE based channel estimation is quite suitable and properly fits to the video signal. CNNAE classifier weights updation are done with minimized Signal to Noise Ratio (SNR), Bit Error Rate (BER) and Mean Square Error (MSE).     

Analytical Modeling for Translating Statistical Changes to Circuit Variability by Ultra-Deep Submicron Digital Circuit Design

This paper presents a physics-based compact gate delay model that includes all short-channel phenomena prevalent at the ultra-deep submicron technology node of 32 nm. To simplify calculations, the proposed model is connected to a compact α-power law-based (Sakurai-Newton) model. The model has been tested on a wide range of supply voltages. The model accurately predicts nominal delays and the delays under process variations. It has been shown that at lower technology nodes, the delay is more sensitive to threshold voltage variations, specifically at the sub-threshold operating region as compared with effective channel length variations above the threshold region.     

Research on phase shift characteristics of electromagnetic wave in plasma

The phase shift characteristics reflect the state change of electromagnetic wave in plasma sheath and can be used to reveal deeply the action mechanism between electromagnetic wave and plasma sheath. In this paper, the phase shift characteristics of electromagnetic wave propagation in plasma were investigated. Firstly, the impact factors of phase shift including electron density,collision frequency and incident frequency were discussed. Then, the plasma with different electron density distribution profiles were employed to investigate the influence on the phase shift characteristics. In a real case, the plasma sheath around the hypersonic vehicle will affect and even break down the communication. Based on the hypersonic vehicle model, we studied the electromagnetic wave phase shift under different flight altitude, speed, and attack angle. The results indicate that the phase shift is inversely proportional to the flight altitude and positively proportional to the flight speed and attack angle. Our work provides a theoretical guidance for the further research of phase shift characteristics and parameters inversion in plasma.     

Digital twin-based analysis of volumetric error mapping procedures

The evaluation of the volumetric accuracy of a machine tool is an open challenge in the industry, and a wide variety of technical solutions are available in the market and at research level. All solutions have advantages and disadvantages concerning which errors can be measured, the achievable uncertainty, the ease of implementation, possibility of machine integration and automation, the equipment cost and the machine occupation time, and it is not always straightforward which option to choose for each application. The need to ensure accuracy during the whole lifetime of the machine and the availability of monitoring systems developed following the Industry 4.0 trend are pushing the development of measurement systems that can be integrated in the machine to perform semi-automatic verification procedures that can be performed frequently by the machine user to monitor the condition of the machine. Calibrated artefact based calibration and verification solutions have an advantage in this field over laser based solutions in terms of cost and feasibility of machine integration, but they need to be optimized for each machine and customer requirements to achieve the required calibration uncertainty and minimize machine occupation time.This paper introduces a digital twin-based methodology to simulate all relevant effects in an artefact-based machine tool calibration procedure, from the machine itself with its expected error ranges, to the artefact geometry and uncertainty, artefact positions in the workspace, probe uncertainty, compensation model, etc. By parameterizing all relevant variables in the design of the calibration procedure, this simulation methodology can be used to analyse the effect of each design variable on the error mapping uncertainty, which is of great help in adapting the procedure to each specific machine and user requirements. The simulation methodology and the analysis possibilities are illustrated by applying it on a 3-axis milling machine tool.     

Traveling-wave Phenomena in a Model of Autocrine Signaling Coupled with Dynamics of the MAPK Cascade

Recently we have revealed a minimal reaction subnetwork in the MAPK (mitogen-activated protein kinase) cascade that is responsible for the emergence of bistable and oscillatory behavior. Here we examine a possible mechanism that provides for the propagation of increased MAPK activity in cell populations by interconnecting the intracellular MAPK subnetwork with the ligand-receptor signaling machinery. Such approach allows for significant reduction of the dimensionality of the parameter space on one hand and the conservation of dynamical complexity of the system on the other hand. The coupled model predicts coexistence of one, two or three different stable steady states, or the coexistence of a stable steady state and periodic solution. We found two robust and physiologically relevant characteristics of the proposed model: (i) There is a very large region of coexistence of at least one stable steady state with non-zero MAPK activity and one steady state with zero MAPK activity in the parameter space. (ii) Spontaneous traveling front waves always switching originally inactive cells into ligand releasing cells emerge in adjacent cell populations, e. g. in healthy and injured tissues. Moreover, the formation of composite traveling front waves and spatial oscillatory patterns of MAPK activity are predicted and discussed.     

基于光流法的固体内部声传播方向测量

目前采用光弹设备测量超声传播方向多为人眼主观观测,其误差较大,难以实现精确的定量测量。将Farneback光流法应用于光弹图像的处理,并根据帧与帧之间的光流图来计算光弹图像中的超声传播方向,可以捕捉图像中的动态声场。在实验中对不同传播方向的超声进行了测量,其绝对偏差度数最大值为2.85°,测量结果较为准确。因此,Farneback光流法可用于光弹图像中声波传播方向的判断,且具有快速、准确和直观等特点。     

爆炸载荷下空孔缺陷与爆生裂纹扩展行为研究

空孔在岩石巷道直眼掏槽爆破中具有重要作用,为研究空孔及其缺陷在爆炸荷载作用下的扩展行为和作用机理,以PMMA代替岩石材料,利用预制裂纹代替空孔缺陷,借助动态焦散线系统和理论分析为手段,研究不同间距下空孔、空孔处预制裂纹、爆生裂纹动态扩展规律及机理,分析不同"径距比"与掏槽效果的关系。研究结果表明:在装药量一定的情况下,随着炮孔与空孔距离的变化,爆生裂纹扩展距离呈现递增而预制裂纹扩展距离呈现递减的趋势,但都存在极值;当炮孔与空孔距离较小时,爆生裂纹和预制裂纹扩展及相互作用最复杂,爆生裂纹扩展经历由压缩应力波为主,表现为直线的前期扩展;由空孔处发射应力波和压缩应力波共同作用下,爆生裂纹偏离炮孔与空孔连心线的中期扩展,以及由空孔应力集中区作用使爆生裂纹向空孔方向偏移的后期阶段;预制裂纹扩展经历由空孔处应力集中作用下,表现为直线的前期扩展,以及由爆生裂纹处反射拉伸波作用使其向爆生裂纹发展的后期阶段;当炮孔与空孔距离较大时,反射应力波及应力集中效应对爆生裂纹和预制裂纹扩展在减弱,爆生裂纹与预制裂纹扩展行为仅有前期直线扩展阶段。"径距比"的大小对爆破效果影响较大,直眼掏槽爆破应以最优"径距比"作为掏槽爆破参数设计的依据。     

基于SAOR的Massive MIMO系统信号检测算法

大规模多输入多输出(Massive multiple input multiple output, Massive MIMO)系统采用最小均方误差(Minimum mean square error, MMSE)接收检测方法时存在矩阵求逆复杂度高的问题，已有较多降低复杂度的研究。在降低检测算法复杂度的同时，如何提高算法收敛速度和检测性能一直是人们关注的焦点。本文将对称加速超松弛(Symmetric accelerated over-relaxation， SAOR)迭代算法应用于Massive MIMO系统信号检测中，避免了复杂的矩阵求逆计算，实现了复杂度较最小均方误差算法降低了一个数量级。仿真结果表明，基于SAOR的检测方法通过较少的迭代次数就能逼近最小均方误差（Minimum mean square error, MMSE）算法的检测性能，为Massive MIMO系统中接收信号的快速检测提供了较好的实现方法。     

Systematic convergence of nonlinear stochastic estimators on the Special Orthogonal Group SO(3)

This paper introduces two novel nonlinear stochastic attitude estimators developed on the Special Orthogonal Group with the tracking error of the normalized Euclidean distance meeting predefined transient and steady‐state characteristics. The tracking error is confined to initially start within a predetermined large set such that the transient performance is guaranteed to obey dynamically reducing boundaries and decrease smoothly and asymptotically to the origin in probability from almost any initial condition. The proposed estimators produce accurate attitude estimates with remarkable convergence properties using measurements obtained from low‐cost inertial measurement units. The estimators proposed in continuous form are complemented by their discrete versions for the implementation purposes. The simulation results illustrate the effectiveness and robustness of the proposed estimators against uncertain measurements and large initialization error, whether in continuous or discrete form.