红外辐射联合回火与冷激杀菌技术对胡萝卜粉品质的影响

首先研究不同红外辐射温度(100,110,120℃)及辐射时间(2.5,5,10 min)对胡萝卜粉微生物及品质的影响,然后根据栅栏效应原理研究红外辐射-回火、红外辐射-冷激联合杀菌对胡萝卜粉微生物、色调值、类胡萝卜素含量等品质的影响。结果表明:100℃、10 min的红外辐射处理使细菌和真菌分别降低了1.9 lg(CFU/g)和2.32 lg(CFU/g),110℃、5 min的红外辐射处使细菌和真菌分别降低了1.58 lg(CFU/g)和2.57 lg(CFU/g)。在上述两种处理条件下胡萝卜粉的水分活度从0.238分别降至0.123和0.147,胡萝卜粉中总类胡萝卜素含量从308.8μg/g降至227.8μg/g和238.8μg/g,色差值(ΔE)为9.11和7.89。与红外辐射单独作用相比,联合回火后的处理没有显著影响细菌数目,处理后保持在5.40~5.80 CFU/g,霉菌、酵母数却在处理过程中显著减少,然而减少量较低,总数仍不低于4.5 lg(CFU/g)。红外辐射-冷激联合处理相比红外辐射单独处理,100℃、10 min联合冷激7 d处理可将细菌数量降低0.25 lg(CFU/g),可将霉菌与酵母数量降低0.28 lg(CFU/g),110℃、5 min联合冷激7 d处可将细菌数量降低0.26 lg(CFU/g),可将霉菌、酵母数量降低0.40 lg(CFU/g),且这些处理下胡萝卜粉的色调值、水分活度、类胡萝卜素含量变化不显著。本试验结果表明,红外辐射-冷激处理具有协同效应,且处理过程中胡萝卜粉的色调值及总类胡萝卜素含量不受影响,这为低水分粉体食品红外辐射联合杀菌提供了参考。     

As the number falls,alternatives to the Hagberg–Perten falling number method: A review

This review examines the application, limitations, and potential alternatives to the Hagberg–Perten falling number (FN) method used in the global wheat industry for detecting the risk of poor end-product quality mainly due to starch degradation by the enzyme α-amylase. By viscometry, the FN test indirectly detects the presence of α-amylase, the primary enzyme that digests starch. Elevated α-amylase results in low FN and damages wheat product quality resulting in cakes that fall, and sticky bread and noodles. Low FN can occur from preharvest sprouting (PHS) and late maturity α-amylase (LMA). Moist or rainy conditions before harvest cause PHS on the mother plant. Continuously cool or fluctuating temperatures during the grain filling stage cause LMA. Due to the expression of additional hydrolytic enzymes, PHS has a stronger negative impact than LMA. Wheat grain with low FN/high α-amylase results in serious losses for farmers, traders, millers, and bakers worldwide. Although blending of low FN grain with sound wheat may be used as a means of moving affected grain through the marketplace, care must be taken to avoid grain lots from falling below contract-specified FN. A large amount of sound wheat can be ruined if mixed with a small amount of sprouted wheat. The FN method is widely employed to detect α-amylase after harvest. However, it has several limitations, including sampling variability, high cost, labor intensiveness, the destructive nature of the test, and an inability to differentiate between LMA and PHS. Faster, cheaper, and more accurate alternatives could improve breeding for resistance to PHS and LMA and could preserve the value of wheat grain by avoiding inadvertent mixing of high- and low-FN grain by enabling testing at more stages of the value stream including at harvest, delivery, transport, storage, and milling. Alternatives to the FN method explored here include the Rapid Visco Analyzer, enzyme assays, immunoassays, near-infrared spectroscopy, and hyperspectral imaging.     

Optimization of room-temperature TCR of polycrystalline La0.9-xSrxK0.1MnO3 ceramics by Sr adjustment

High-density La_0.9-xSr_xK_0.1MnO₃ ceramics (LSKMO, A-site = La, Sr and K, 0 ≤ x ≤ 0.25) are successfully fabricated by using facile sol-gel method. Electrical properties are performed by using combination of phenomenological percolation (PP) model, double exchange (DE) mechanism, and Jahn-Teller (JT) effect. Moreover, X-ray diffraction and scanning electron microscopy are employed to analyze the structure and morphology of LSKMO ceramics. Valence states and ionic stoichiometry are assessed by using X-ray photoemission spectrometry. Results reveal that Sr²⁺ ions, substituting La³⁺ ions, significantly influenced DE mechanism and JT effect. In addition, Sr-doping plays essential role in improving electrical properties of LSKMO ceramics. At optimal doping content of x = 0.09, peak temperature coefficient of resistance (TCR) of the resistivity is found to be 11.56% K^?1 at 297.15 K, which is optimal TCR for A-site K-occupied perovskite manganese oxides. These results confirm that polycrystalline LSKMO ceramics render high room-temperature TCR values due to Sr-doping.     

物料堆场智能化管理经验分享

华润水泥（罗定）有限公司根据物料储存需求，共有三个长堆棚分为9个室内料场堆放原材料及混合材，厂内有4台铲车无规则轮流在这8个料场内作业，同时外来运料货车、公司化验及验收人员也会不间断地进入不同堆棚。由于料场内空间狭窄，驾驶员视线不好，如果堆棚料场内铲车在作业时，有其他人员或车辆进入铲车工作区域共同作业，在没有检测装置对进入的人、车进行识别，提醒铲车驾驶员的情况下，容易发生碾压进入人员或车辆碰撞的安全事故。公司根据现场实际，自2020年起决定实施从堆场出入口智能红外感应技术、装载机车载识别系统、智能声光语音提醒、实时监控显示、照明、堆场硬件设施等五方面实施物料堆场车辆智能化安全预警系统项目。     

红外菲涅尔透镜的注射超声辅助成型优化

为了提升聚合物红外菲涅尔透镜的光学性能,以其表面微沟槽的成型质量为目标,提出了一种高效的注射超声辅助成型方法,并对工艺参数进行了综合质量优化。首先分析了超声振动对聚合物的加热和加压效应,设计了一套一模两腔的对比试验模具;接着以红外菲涅尔透镜的调制传递函数MTF和齿形平均高度h为优化质量目标,设计了四步骤的多目标优化流程,通过试验设计、基于BP神经网络的质量目标与注射工艺参数关系建模、基于NSGA-Ⅱ的多目标优化和试验验证进行工艺参数的综合优化。实验结果表明:该多目标优化流程具有很高的精度,MTF和h的平均预测误差MPE分别为4.16%和3.32%;注射超声辅助成型的菲涅尔透镜微沟槽具有更高的复制质量,其齿沟槽平均高度h增加了15.6%,且h值的波动量随着h值的增大而增大,MTF值受齿高h均匀性的影响大于齿高h对其的影响。     

不同发射率下红外热图像的非稳态温度场测量研究

通过分析红外测温公式,研究物体发射率对红外热图像测温精度的影响,并找出影响物体发射率的因素。根据经典计算方法,发现了物体发射率在红外热图像测温应用中的局限。从红外热图像的角度对发射率的计算进行了建模,基于修正物体发射率得到提高红外热图像对非稳态温度场测量精度的模型。对铸铁、不锈钢进行了3组测温实验,红外热图像直接测量的最大误差分别为2.1℃、1.7℃、2.3℃,而所提出的方法测量的最大误差分别为1.0℃、0.7℃、1.6℃。通过对比分析3组测量结果数据验证了测量方法的可行性。     

重水浓度与吸光度关系曲线类型研究

重水作为反应堆的慢化材料，其浓度直接影响反应堆的安全和性能。为研究其重水浓度与吸光度间的关系曲线类型，基于朗伯-比尔定律，从理论上推导出液态重水中某种水分子的红外吸收峰分别与0~2种其他水分子的红外吸收峰发生重叠时重水浓度与吸光度间的关系式，分情况对二者之间的关系曲线类型进行讨论。采用傅里叶变换红外光谱仪，测得浓度为0.015%~99.98%（摩尔比）的重水标准样品吸收光谱，对重水浓度和吸光度间的关系曲线类型进行验证，理论推导与实际吻合。研究表明，一般情况下，宽浓度范围内，重水浓度与吸光度间的关系曲线类型为二次曲线；窄浓度范围内，关系曲线类型为线性。特殊情况下，吸光度为定值或关系曲线类型为线性。     

补偿强反光体表面红外测温误差的算法研究

针对运动强反光体表面温度实时测量困难、精度低这一难点,本文从红外测温原理入手,分析并揭示了红外测温精度易受到被测物体反射率、测量距离、测量环境、红外入射角等因素的影响。根据铝板材加工设备轧辊表面测温实际需要设计了一种利用红外传感器实现对强反光体表面温度点对点测量的方案。通过对测量数据的研究分析建立了一种基于斯忒藩定律的红外入射角度补偿算法,以此减小因红外入射角度变化产生的测温误差。实验结果证明本方法能较好地弥补红外入射角度变化产生的测温误差,提高测温精度。该补偿算法运算简单,适应性强,为改善入射角度变化对测温精度影响提供了新的方法。