解决17型车钩钩体尾部裂纹措施

本文论述了17型车钩钩体生产过程的工艺改进,介绍了17型车钩钩体尾部裂纹产生的原因及采取的措施。通过工艺上采用保温暗冒口提高凝固过程补缩性,同时采用空心销孔芯提高芯子的退让性,并加强车钩钩体生产过程质量控制等措施,成功地解决了17型车钩钩体尾部裂纹问题,产品废品率由4.3%降到0.23%.     

可调偏迈步式胶带自移机尾的研究

随着掘进工作面自动化程度的提高,掘进巷道速度也在日益加快,而现有的顺槽皮带机机尾移动缓慢且移动时工作量大,需要两三人配合操作,存在一定的安全隐患。针对以上问题,研发可调偏迈步式胶带自移机尾,具有与悬挂二运皮带转载机搭接行程长,可以迈步式前进,自动调偏等功能,同时,可以降低工人的劳动强度,加快巷道掘进速度。     

一种钛白粉转窑煅烧尾气余热利用新装置

钛白粉煅烧转窑尾气的高湿、高硫、高酸露点的特性使得转窑尾气余热利用过程中换热器寿命不理想。在总结已有尾气余热利用方式存在问题的基础上,提出了一种长寿命、易维护的套管式热管余热利用装置,该装置由彼此分离的换热套管通过弯头、法兰连接成为整体,尾气垂直横掠双层套管段,与高硫、高湿的尾气通过相变介质的相变完成热量由尾气向取热介质的转移,产生钛白粉生产工艺所急需的蒸汽,双层管的相变换热套管对比单层管的重力热管换热器寿命明显延长;连接换热套管的单层管弯头不与高湿、高硫尾气换热,大大减轻了尾气对单层管的腐蚀。换热器应用在3.6 m×58 m的钛白粉煅烧窑上,每年可以产生0.9 MPa的水蒸气1.12万t,为企业带来可观的经济效益。     

煤矿主提升机平衡尾绳更换工艺的改进

更换煤矿主提升机平衡尾绳是煤矿重大检修项目之一,原施工方案为两条平衡尾绳同时更换,存在较多不合理之处,改进为以新绳带旧绳、单绳依次更换的方案,实现了安全、快捷地更换平衡尾绳,同时减少施工对矿井生产的影响,提高煤矿经济效益。     

引水式水电站变顶高尾水洞水力特性和体型优化

考虑引水式水电站常用的有压尾水洞和变顶高尾水洞两类布置型式,采用基于特征线法的有压管道瞬变流分析模型和适用于明满流过渡过程分析的改进狭缝法模型,分别分析系统的过渡过程特性和尾水洞体型参数的敏感性,研究不同的尾水洞型式下尾水系统的水力特性,进一步揭示了变顶高尾水洞的底宽、洞高和顶坡对尾水管进口最小内水压力的影响规律。结果表明,与增大面积的有压尾水洞比较,变顶高尾水洞是一种可行的布置型式,可有效提高尾水管进口的最小内水压力且水锤过程衰减较快;合理增大变顶高尾水洞底宽、洞高或顶坡均可不同程度地改善尾水管进口最小内水压力,其中顶坡的影响相对明显,为体型优化设计提供了参考依据。     

On the limit theory of the Gaussian SQMLE in the EGARCH(1,1) model

We derive the limit theory of the Gaussian stable quasi maximum likelihood estimator for the stationary EGARCH(1,1) model when the squared innovation process has marginals with regularly varying tails. We derive regularly varying rates and limiting stable distributions. We perform Monte Carlo experiments to assess the extent of the parameter space corresponding to the invertibility condition, and the quality of the asymptotic approximation.     

Studies on one‐dimensional polyanilines prepared with n‐dodecylbenzenesulfonic and camphorsulfonic acids

Anilinium salts complexed with n‐dodecylbenzenesulfonic acid (DBSA) and camphorsulfonic acid (CSA) were found to self‐assemble into cylindrical micelles with bigger diameters than those complexed with only DBSA or CSA. These cylindrical micelles were polymerized into one‐dimensional copolyaniline nanotubes (PANIDBSACSA) via emulsion polymerization, demonstrating various morphologies depending on the ratio of DBSA to CSA. The UV?visible?NIR spectra of neat PANICSA and PANIDBSACSAs illustrate significant free carrier tails in the NIR region and conductivity 10–20 times higher than that of neat PANIDBSA whose UV?visible?NIR spectrum does not illustrate significant carrier tails. When the number of moles of DBSA is equivalent to or exceeds that of CSA in the polymerization mixture, SEM and TEM micrographs of the PANIDBSACSAs reveal that they have larger diameters than that of neat PANIDBSA. Besides, some of the surfaces of the big nanotubes were implanted and mounted with lots of small nanofibers of neat PANICSA polymerized from some of the CSA‐complexed aniliniums which were excluded from the cylindrical micelles before polymerization. TGA thermograms of PANIDBSACSAs show an intimate relationship between thermal deprotonation and the DBSA to CSA ratio. X‐ray diffraction patterns demonstrate a layered structure arrangement of polyaniline molecules of all one‐dimensional nanofibers. © 2015 Society of Chemical Industry     

120kt/a磷铵装置除尘、洗涤系统技术改造提高装置运行效率

我公司120 kt/a磷酸二铵生产工艺由于尾气洗涤及除尘系统设计缺陷,长期存在粉尘及氨外溢严重,生产周期短等问题。通过对上述系统的改造:将造粒与干燥尾气分开洗涤,对部分设备尺寸及各级洗涤介质进行调整;在现场环境改善、氨回收率提高、生产周期延长等方面都取得了较好效果。     

在线磁氧法和色谱法在测定氧化尾气时的比较

简单介绍了常见的几种氧气分析方法,重点阐述了在线顺磁氧分析仪和气相色谱法测定氧气含量的原理。分析比较了沧州旭阳化工环己酮项目,氧化尾气中氧含量在使用两种方法测定时出现的不一致现象,并根据实际生产工艺的特点对色谱法进行了改进。通过改进色谱方法解决了两种方法测定结果不一致的现象,为以后环己酮项目氧化尾气测定提供了参考。