Electrospun microporous gelatin–polycaprolactone blend tubular scaffold as a potential vascular biomaterial

The work reported involved the fabrication of an electrospun tubular conduit of a gelatin and polycaprolactone (PCL) blend as an adventitia‐equivalent construct. Gelatin was included as the matrix for increased biocompatibility with the addition of PCL for durability. This is contrary to most of the literature available for biomaterials based on blends of gelatin and PCL where PCL is the major matrix. The work includes the assiduous selection of key electrospinning parameters to obtain smooth bead‐free fibres with a narrow distribution of pore size and fibre diameter. Few reports elucidate the optimization of all electrospinning parameters to fabricate tubular conduits with a focus on obtaining homogeneous pores and fibres. This stepwise investigation would be unique for the fabrication of gelatin–PCL electrospun tubular constructs. The fabricated microfibrous gelatin–PCL constructs had pores of size ca 50–100 μm reportedly conducive for cell infiltration. The measured value of surface roughness of 57.99 ± 17.4 nm is reported to be favourable for protein adhesion and cell adhesion. The elastic modulus was observed to be similar to that of the tunica adventitia of the native artery. Preliminary in vitro and in vivo biocompatibility tests suggest safe applicability as a biomaterial. Minimal cytotoxicity was observed using MTT assay. Subcutaneous implantation of the scaffold demonstrated acute inflammation which decreased by day 15. The findings of this study could enable the fabrication of smooth bead‐free microfibrous gelatin–PCL tubular construct as viable biomaterial which can be included in a bilayer or a trilayer scaffold for vascular tissue engineering. © 2019 Society of Chemical Industry     

Synergistic antimicrobial effect of lactocin AL705 and nisin combined with organic acid salts against Listeria innocua 7 in broth and a hard cheese

The effectiveness of antimicrobial mixtures against Listeria innocua 7, used as a L. monocytogenes surrogate, was investigated in broth and a food system. Synergistic effects were found for nisin (Nis), potassium sorbate (PS), calcium propionate (CP) and sodium lactate (SL), Nis + PS being the most effective binary mixture that exhibited listericidal activity in broth. To assess the effect of adding lactocin AL705 (AL705) to Nis + organic acid salt combinations, tridimensional isobolograms were generated. Sub-MIC combinations of the antimicrobials exerted bactericidal activity against L. innocua 7 after AL705 addition to the binary mixtures. However, when applied on Sardo cheese contaminated with L. innocua 7 (initial inoculum 4.45 ± 0.06 CFU g⁻¹), only Nis + PS + AL705 produced count reductions respect to the control, reaching 3.04 ± 0.35 CFU g⁻¹ counts after 15 days at 15 °C. Ternary combinations containing AL705 showed potential to reduce antimicrobial usages for L. innocua 7 inhibition.     

Link between Lipid Second Messengers and Osmotic Stress in Plants

Plants are subject to different types of stress, which consequently affect their growth and development. They have developed mechanisms for recognizing and processing an extracellular signal. Second messengers are transient molecules that modulate the physiological responses in plant cells under stress conditions. In this sense, it has been shown in various plant models that membrane lipids are substrates for the generation of second lipid messengers such as phosphoinositide, phosphatidic acid, sphingolipids, and lysophospholipids. In recent years, research on lipid second messengers has been moving toward using genetic and molecular approaches to reveal the molecular setting in which these molecules act in response to osmotic stress. In this sense, these studies have established that second messengers can transiently recruit target proteins to the membrane and, therefore, affect protein conformation, activity, and gene expression. This review summarizes recent advances in responses related to the link between lipid second messengers and osmotic stress in plant cells.     

Influence of grape composition and winemaking on the anthocyanin composition of red wines of Tannat

The anthocyanin composition of Tannat red wines obtained with four winemaking techniques was evaluated in different years. The wines were elaborated with traditional maceration (TM), cold pre‐fermentative maceration, delayed extraction of anthocyanins and extended maceration. Two vinifications were carried out for each technique, employing 70 kg of grapes in each one. The anthocyanin composition of wines was analysed by high‐performance liquid chromatography–diode array detection. The results confirm the fundamental role of the grape composition on the anthocyanin composition of the wines. The winemaking had an important effect on the total concentration of anthocyanins and also may modify the anthocyanic profile of wines. The wines obtained with TM had higher or similar content of anthocyanins than those elaborated with the other techniques. Canonical discriminant analysis of data showed that vintage has a greater effect on anthocyanin concentration than winemaking techniques.     

Marginal integration <Emphasis Type="Italic">M</Emphasis>-estimators for additive models

Additive regression models have a long history in multivariate non-parametric regression. They provide a model in which the regression function is decomposed as a sum of functions, each of them depending only on a single explanatory variable. The advantage of additive models over general non-parametric regression models is that they allow to obtain estimators converging at the optimal univariate rate avoiding the so-called curse of dimensionality. Beyond backfitting, marginal integration is a common procedure to estimate each component in additive models. In this paper, we propose a robust estimator of the additive components which combines local polynomials on the component to be estimated with the marginal integration procedure. The proposed estimators are consistent and asymptotically normally distributed. A simulation study allows to show the advantage of the proposal over the classical one when outliers are present in the responses, leading to estimators with good robustness and efficiency properties.     

Stability of the antimicrobial activity of acetogenins from avocado seed,under common food processing conditions,against Clostridium sporogenes vegetative cell growth and endospore germination

Anticlostridial activity of acetogenins from avocado seed was further characterised, and their stability and effectiveness under food processing conditions, and in a model food system, studied for the first time. Isolated AcO‐avocadenyne (1) and AcO‐avocadene (2) showed anticlostridial potential, particularly the latter molecule. Enriched acetogenins extracts, obtained at laboratory scale (EAE) and semi‐commercially (Avosafe^®), presented similar MIC values (3.9–9.8 ppm) and a bacteriostatic effect. Extracts bioactivity showed resistance to heat (≤120 °C), high hydrostatic pressure (HHP; 300–600 MPa, 3–6 min, 25 °C) and salt (≤3% w/v). In addition, the extract was most stable at pH ≥ 7.0 and potency against endospores increased after HHP treatment and exposure to pH 9.5, suggesting a positive effect on solubility or structure of particular acetogenins. In a model food system processed by HHP, acetogenins were retained; however, initial quantities gradually declined by 63% and 32% at 25 and 4 °C, respectively, at the end of the storage period (42 days). Most stable molecules (persediene (4) > persenones > AcO‐avocadene (2)) possess a keto or trans‐enone group at C‐4 in the aliphatic chain, which could support hydrogen donation to surrounding carbon atoms and confer antioxidant activity. Active endospores were completely inhibited by 5000 ppm Avosafe^® in the model food system (37 °C, 72 h) and lower concentrations (500–1000 ppm) resulted in 1–2 log reduction of a 3 log inoculum target. Efficacy information generated in the present work is considered crucial to improve scientific knowledge on spore inhibition properties of avocado acetogenins.     

Study of shrinkage porosity in spheroidal graphite cast iron

This study aims at identifying the relationship between the shrinkage cavities and the solidification structure in spheroidal graphite cast iron. Cast samples specially designed to contain shrinkage cavities were used. The solidification macrostructure was revealed using the Direct Austempering After Solidification method, while the solidification microstructure was revealed by using colour etching. At the midsection of the pieces, the shrinkage cavities and the solidification structure were observed jointly. The study showed that the classification of shrinkage porosity found in literature does not correspond to the ductile iron solidification model recognized by most of the scientific community. Early solidification models, and therefore shrinkage formation mechanisms, were proposed in instances when there was not a thorough knowledge of the morphology of the solid phases during solidification. Nowadays, defects formation mechanisms can be described with higher accuracy. Therefore, an updated classification of shrinkage porosity for spheroidal graphite iron is proposed.     

Adaptive control for the discrete-time parametric-strict-feedback form

The design of a state feedback controller for a class of SISO non-linear discrete-time systems is proposed. Namely, an alternative adaptive scheme is stated for the parametric-strict-feedback form. The control objective is to achieve tracking of a reference signal. Backstepping control is combined with a parameter estimator based on an orthogonalization process which overcomes the drawback of over-parameterization. Without assuming any growth conditions on the non-linearities, global boundedness and convergence are obtained in the closed loop system.