排序方式: 共有32条查询结果,搜索用时 312 毫秒
1.
2.
3.
4.
采用胶晶模板结合浸渍烧结法制备了可用于锂离子电池负极的三维有序大孔(3DOM)C/α-Fe_2O_3复合材料。采用X射线衍射仪和扫描电镜对其进行了物相表征和形貌分析,采用电池测试系统和电化学工作站进行了电化学性能测试。结果表明:该材料具有三维互通的网络结构,α-Fe_2O_3纳米颗粒均匀负载在3DOM C骨架上。以其制备的负极表现出优异的电化学性能,当电流密度为0.5C时,经历300个充放电循环后的可逆比容量仍达到489.35 m A·h/g。这主要得益于集流体独特的3DOM结构,不仅提供充足的空间来容纳在循环中产生的体积变化和释放应力,而且大大缩短了电子和锂离子的传输路径。 相似文献
5.
A simple strategy to prepare a hybrid of nanocomposites of anatase TiO2/graphene nanosheets (GNS) as anode materials for lithium-ion batteries was reported.The morphology and crystal structure were studied by X-ray diffraction (XRD),field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM).The electrochemical performance was evaluated by galvanostatic charge-lischarge tests and alternating current (AC) impedance spectroscopy.The results show that the TiO2/GNS electrode exhibit higher electrochemical performance than that of TiO2 electrode regardless of the rate.Even at 500 mA/g,the capacity of TiO2/GNS is 120.3 mAh/g,which is higher than that of TiO2 61.6 mAh/g.The high performance is attributed to the addition of graphene to improve electrical conductivity and reduce polarization. 相似文献
6.
本研究使用细菌纤维素为前驱体制备碳气凝胶(CA),以其作为载体,通过浸渍和高温处理制得了柔性W-O-C/CA和WC/CA复合电极材料,研究了制备工艺对材料形貌、物相和对甲醇电催化氧化性能的影响。随着高温处理温度的上升和保温时间的延长,物相变化为:钨前驱体→钨氧化物(WO3、WO3-x、WO2)→W→WCx→WC。在700℃保温2 h制得的柔性电极,负载颗粒主要物相为缺氧钨氧化物(WO3-x)、WO2和少量碳化钨(WC),具有良好的甲醇电催化性能和长循环稳定性,0.8 V下电流密度为76.5 mA·cm-2,1000次循环后峰电流密度保持初始值的88%,有望用于便携式或微型甲醇燃料电池阳极。 相似文献
7.
8.
9.
10.