An efficient verifiable (t,n)-threshold secret image sharing scheme with ultralight shares

Multimedia Tools and Applications - A secret sharing scheme partitions a secret into a set of shares and distributes them among the eligible participants, with each participant receiving one share...     

A numerical model to predict the powder–binder separation during micro-powder injection molding

The micro-powder injection molding (micro-PIM) process has the potential to bridge the gap between the design and manufacturing of micro-components that are often used in small and handy devices. Numerical modeling helps to analyze and overcome various difficulties of micro-PIM. In the present work, a numerical model is developed to predict the powder–binder separation (a common defect in PIM and especially severe in micro-PIM) during the injection of an alumina feedstock. A powder–binder separation criterion is proposed dealing with applied injection pressure and friction force between the powder and binder. An indirect comparison of feedstock travel time between two locations is used to validate the model. The predicted segregation from the simulated result is supported by a qualitative experimental measurement. The developed model can be used to optimize injection parameters to get a defect-free product.     

Sensitivity of Viscosity on Molten Ti Infusion into a B4C-Packed Bed at the Microscale

Metallurgical and Materials Transactions B - The effect of the surface tension–viscosity dissipation driving liquid Ti flow into a B4C packed bed was analyzed at 1941 K and 2573 K. The model...     

A Wide Learning Approach for Interpretable Feature Recommendation for 1-D Sensor Data in IoT Analytics

Machine Intelligence Research - This paper presents a state of the art machine learning-based approach for automation of a varied class of Internet of things (IoT) analytics problems targeted on...     

Guayule natural rubber composites: impact of fillers on their cure characteristics,dynamic and mechanical behavior

Guayule natural rubber (GNR) is an alternative resource of Hevea natural rubber (HNR) with 99.9% cis content in its 1,4-polyisoprene chemical backbone. In this study, compounds were formulated independently with four different reinforcing fillers such as carbon black (HAF), precipitated silica (VN3), fume silica (FUM) and nanofly ash (NFA) for the advancement of GNR based products. The cure characteristic, dynamic-mechanical performance and mechanical properties of GNR composite were studied with the reinforcing effect of different fillers on GNR. The cure characteristic results demonstrated that HAF and FUM silica filled compounds had more processing safety than VN3 and NFA filled compounds. Viscoelastic parameters of the vulcanizates were studied by dynamic mechanical analysis to estimate the glass transition characteristics and dynamic behavior. The higher storage modulus of FUM silica vulcanizate was an indication of superior filler reinforcing nature and improved rolling resistance than other filled systems. Additionally, HRTEM analysis also proved the better filler dispersion ability of FUM silica in GNR matrix. The mechanical properties were studied with a variation of each filler loading of 8, 16, and 32 phr in GNR vulcanizates. The tensile strength of each filled system increased with an increase of filler content from 8 to 32 phr. In comparison, FUM silica GNR vulcanizates exhibited better mechanical properties, therefore, it was considered as a better structure-performance composite than those of HAF, VN3 and NFA filled composites.

     

Bandwidth Enhancement of a Wide Slot Antenna Using Fractal Geometry for UWB Application with Multiple Notched Bands

Wireless Personal Communications - In this paper a combination of rectangular and elliptical fractal geometry is applied on a regular hexagonal wide slot antenna fabricated using a FR4 substrate to...     

Angular absorptance and thermal degradation analysis of TiB2/Ti(B,N)/SiON/SiO2 multilayer solar absorber coating

Multilayer solar selective absorber coatings have been developed in the last few decades. The thermal stability in terms of microstructure gives an insightful understanding of the optical properties of such coatings. In this context, we extensively utilized transmission electron microscopy (TEM) analysis to establish the thermal stability of TiB₂/Ti(B,N)/SiON/SiO₂ coating, under thermal cycling/continuous heating to 500°C in vacuum for 250 h. In particular, this work reports the variation in the solar absorptance of TiB₂/Ti(B,N)/SiON/SiO₂ coating with different angles of incidence of the solar radiation. Extensive analysis using the TEM technique reveals the presence of oxide interlayers that act as diffusion barrier layers to enhance the thermal stability of the coating. Computational simulation using SCOUT software validates the measured reflectance spectrum of the developed multilayer coating. The minor changes in absorptance and emissivity after heat treatment in vacuum at 500°C, together with high solar absorptance over a broad angular variation, establish the potential application of TiB₂/Ti(B,N)/SiON/SiO₂ as a selective coating in concentrated solar power systems.     

Mechanical and tribological behavior of alumina and alumina‐CNT reinforced hybrid unsaturated polyester composites

Micro‐ and nano‐scale wear behavior of alumina vis‐á‐vis alumina‐carbon nanotube‐reinforced hybrid composites has been studied. In comparison to the pristine alumina, the alumina‐carbon nanotube hybrid reinforcement resulted in reduced scratch depth and lower frictional coefficient. Addition of carbon nanotube has effectively modified the pristine alumina into a superior wear resistant filler. POLYM. COMPOS., 37:1577–1586, 2016. © 2014 Society of Plastics Engineers     

Size independent fracture energy evaluation for plain cement concrete

The present work deals with the investigation of a robust analytical scheme to assess the size‐independent fracture energy of concrete. The study involves the numerical modelling of three‐point bend (TPB) concrete beams that are geometrically similar, having constant length to depth ratio with varying range of notch to depth (a/W) ratios. The unique nonlinear behaviour of concrete 1material is incorporated through fracture energy‐based strain‐softening model in the finite‐element numerical simulation. The International Union of Laboratories and Experts in Construction Materials, Systems and Structures (RILEM) fracture energy values are evaluated through numerical simulation of several set of experimentally observed load‐load line displacement response. The RILEM fracture energy values associated with geometrically similar beams have been utilised to develop a methodology for assessment of the size‐independent fracture energy of concrete. The numerically predicted and experimentally evaluated size‐independent fracture energy using the RILEM fracture energy values are found to be in close agreement.     

Thermal-aware task allocation and scheduling for periodic real-time applications in mesh-based heterogeneous NoCs

Real-Time Systems - With continuous technology scaling, the power density and hence the temperature of Network-on-Chip (NoC) may increase rapidly. This in-turn degrades the performance of the chip...