Notwendigkeit und Vermarktung von Flexibilitätsoptionen im Energiesystem der Zukunft

Demands on production, distribution and consumption of electrical energy change fundamentally with the energy revolution. Energy purchasing costs for inflexible consumers are rising and proceeds of inflexible producers are sinking. Companies are able to reduce costs by marketing operational flexibility options. This article sets out the need of flexibility in the energy system and the new marketing options. Flexibility potentials within infrastructure plants of a chemical park are analyzed, evaluated regarding marketing and activated in the presented research project FlexChemistry.     

Thermoset IM-LSI-based C/C-SiC: Influence of flow direction and weld lines on microstructure and mechanical properties

The production of ceramic matrix composites (CMC) based on C/C-SiC is still very cost-intensive and therefore only economical for a few applications. The fabrication of the preforms involves many costs that need to be reduced. In this work, the shaping of the CFRP-preforms is realized by thermoset injection molding, which enables large-scale production. The polymeric matrix used is a multi-component matrix consisting of novolak resin, curing agent and lubricant. Six millimeter chopped carbon fiber with a proportion of 50 wt.% were used as a reinforcement. These ingredients are processed by an industrial equipment for compounding and injection molding in order to manufacture a CFRP demonstrator representing a brake disc. Test specimens are cut out of the demonstrator in different directions in order to investigate influences of flow direction and weld lines on microstructural and mechanical properties. Afterward, the CFRP samples were converted to C/C-SiC composites by the liquid silicon infiltration process. The article addresses the flow behavior of the compound during the injection molding and the building of the weld lines in the demonstrator. In addition, results of the directional dependence of the microstructural and mechanical properties within the fabricated disc in the different production steps are presented.     

Pinched Cord and Overdriven Staple Failures: Research on the Causation of an Electrical Fire

In the past, some fire investigators have determined the cause of a fire to be electrical in nature based, in part, on the presence of an electrical cord or cable found beneath a furniture leg or a cable wedged tightly under a staple. While fires resulting from these events are possible, the mechanisms that lead to these failures are poorly understood. In this paper, the results of four research projects are presented. The first three projects focused on the creation of a pinched cord failure under various current loads and pressures. In the last project, a typical nonmetallic-sheathed cable was damaged and then installed with an overdriven staple over the damaged location. In all tests, the cords and cables were subjected to current loads varying between 100 and 250% of the rated ampacity. The failure rate of pinched cords was approximately 1%, but required the use of overloaded circuits and pre-existing damage or special orientation of the cord under test. A critical factor worth considering with these failures, which is often not accounted for, is time. These failures may take weeks, months, or years to occur under normal conditions, although some investigators may assume they develop nearly instantaneously. The conditions of the circuit are also important, as the only way a failure developed in these tests was by operating the circuits in excess of their rated parameters.     

Fox Hunting in Wild Apples: Searching for Novel Genes in Malus Sieversii

Malus sieversii is considered the progenitor of modern apple (Malus pumila) cultivars and to represent a valuable source of genetic diversity. Despite the importance of M. sieversii as a source of disease resistance, stress tolerance, and novel fruit traits, little is known about gene function and diversity in M. sieversii. Notably, a publicly annotated genome sequence for this species is not available. In the current study, the FOX (Full-length cDNA OvereXpressing) gene hunting system was used to construct a library of transgenic lines of Arabidopsis in which each transgenic line overexpresses a full-length gene obtained from a cDNA library of the PI619283 accession of M. sieversii. The cDNA library was constructed from mRNA obtained from bark tissues collected in late fall–early winter, a time at which many abiotic stress-adaptative genes are expressed. Over 4000 apple FOX Arabidopsis lines have been established from the pool of transgenic seeds and cDNA inserts corresponding to various Gene Ontology (GO) categories have been identified. A total of 160 inserts appear to be novel, with no or limited homology to M. pumila, Arabidopsis, or poplar. Over 1300 lines have also been screened for freezing resistance. The constructed library of transgenic lines provides a valuable genetic resource for exploring gene function and diversity in Malus sieversii. Notably, no such library of t-DNA lines currently exists for any Malus species.     

Effect of chitosan and Dysphania ambrosioides on the bone regeneration process: A randomized controlled trial in an animal model

The focus of this triple‐blind study was on evaluating the effect of chitosan combined with Dysphania ambrosioides (A) extract on the bone repair process in vivo. In total, 60 male Wistar rats (Rattus norvegicus albinus) weighing between 260 and 270 g were randomly selected for this study and distributed into four groups (n = 15). Group C (chitosan), Group CA5 (chitosan + 5% of D. ambrosioides), Group CA20 (chitosan + 20% of D. ambrosioides), and Group CO (Control‐Blood clot). In each animal, bone defects measuring 2 mm in diameter were performed in both tibias for placement of the substances. After 7, 15, and 30 days, the animals were sedated and sacrificed using the cervical dislocation technique and the tissues were analyzed under optical microscope relative to the following events: inflammatory infiltrate, necrosis, osteoclasts, osteoblasts, fibroblasts, periosteal, and endosteal bone formation. The data were evaluated to verify distribution using the Kolmogorov–Smirnov test, and variance, using the Levene test; as distribution was not normal, data were subjected to the Kruskal–Wallis and Dunn nonparametric tests (p < .05). A significant inflammatory infiltrate was observed in Group CA5 (p = .008) in the time interval of 7 days, and in Group C at 15 (p = .009) and 30 (p = .017) days. Osteoblastic activity was more significant in Group CA20 (p = .027) compared with CA5 in the time interval of 7 days. Group CA20 demonstrated a significantly higher endosteal and periosteal bone formation value in the time interval of 7 (p = .013), 15 (p = .004), and 30 days (p = .008) compared with the other groups. The null hypothesis was refuted, bone regeneration was faster in spheres with an association of chitosan and 20% extract, and complete bone repair occurred clinically at 15 days and histologically at 30 days. The spheres proved to be a promising method for the biostimulation of alveolar bone repair and bone fractures.     

Distributed ledger technology in supply chains: a transaction cost perspective

With the emergence of distributed ledger technology (DLT), numerous practitioners and researchers have proclaimed its beneficial impact on supply chain transactions in the future. However, the vast majority of DLT initiatives are discontinued after a short period. With the full potential of DLT laying far down the road, especially managers in supply chain management (SCM) seek for short-term cost-saving effects of DLT in order to achieve long-term benefits of DLT in the future. However, the extant research has bypassed grounding long-term as well as short-term effects of DLT on supply chain transaction with empirical data. We address this shortcoming, following an abductive research approach and combining empirical data from a multiple case study design with the corresponding literature. Our study reveals that the effects of DLT on supply chain transactions are two-sided. We found six effects of DLT solutions that have a cost-reducing or cost avoidance impact on supply chain transactions. In addition, we found two effects that change the power distribution between buyers and suppliers in transactions and a single effect that reduces the dependency of supply chain transactions on third parties. While cost-reducing and avoidance as well as dependency-reducing effects are positive effects, the change in power distribution might come with disadvantages. With these findings, the paper provides the first empirical evidence of the impact of DLT on supply chain transactions, which will enable managers to improve their assessment of DLT usage in supply chains.     

Effects of breed and age at slaughter on degradation of muscle lipids during processing of dry‐cured hams

Hams from Landrace, Duroc and Hampshire pigs slaughtered at ages 6, 7.5 and 9 months were processed to generate Norwegian Parma‐style hams. Lipid contents and the compositions of fatty acid classes (ΣSFA, ΣMUFA, ΣPUFA) within neutral lipids, phospholipids and free fatty acids were determined. Small differences in lipid degradation and composition of the classes were revealed. However, significant sensory differences related to lipids were observed. Breed was more important than age. Dry‐cured Hampshire hams gave a more intense mature odour that may be associated with higher overall lipid degradation. Unexpectedly, these hams also demonstrated high juiciness and tenderness, which could be related to the melting characteristics of the fat. Dry‐cured Duroc hams showed a higher susceptibility towards rancidity, presumably associated with preferential oxidation of n‐6 fatty acids relative to C18:1 n‐9. Dry‐cured Landrace hams showed the lowest juiciness and tenderness, likely due to their lower fat content (marbling).     

Inhomogeneity of CoCrW powder products manufactured by SLM technology

Journal of Mechanical Science and Technology - The article deals with selective laser melting process using CoCrW powder. Our aim was to identify the influence of product position on the building...