Full AC analysis of value of DER to the grid and optimal DER scheduling

This paper presents part of the work ComEd and Quanta Technology have performed to quantify the locational and temporal value of DER to avoid distribution grid upgrade investments. It focuses on the formulation of a robust and efficient algorithm for DER optimal dispatch on a distribution feeder to mitigate the violation of current and voltage limits using the allocated cost of capacity and locational marginal value of real and reactive DER injection/withdrawal.     

Reconstruction of reflectance spectra using weighted principal component analysis

The weighted principal component analysis technique is employed for reconstruction of reflectance spectra of surface colors from the related tristimulus values. A dynamic eigenvector subspace based on applying certain weights to reflectance data of Munsell color chips has been formed for each particular sample and the color difference value between the target, and Munsell dataset is chosen as a criterion for determination of weighting factors. Implementation of this method enables one to increase the influence of samples which are closer to target on extracted principal eigenvectors and subsequently diminish the effect of those samples which benefit from higher amount of color difference. The performance of the suggested method is evaluated in spectral reflectance reconstruction of three different collections of colored samples by the use of the first three Munsell bases. The resulting spectra show considerable improvements in terms of root mean square error between the actual and reconstructed reflectance curves as well as CIELAB color difference under illuminant A in comparison to those obtained from the standard PCA method. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 360–371, 2008     

Bioprinting a cell-laden matrix for bone regeneration: A focused review

Although many efforts have been made to regenerate the bone lesions, existing challenges can be mitigated through the development of tissue engineering scaffolds. However, the weak control on the microstructure of constructs, limitation in preparation of patient-specific and multilayered scaffolds, restriction in the fabrication of cell-laden matrixes, and challenges in preserving the drug/growth factors' efficacy in conventional methods have led to the development of bioprinting technology for regeneration of bone defects. So in this review, conventional 3D printers are classified, then the priority of the different types of bioprinting technologies for the preparation of the cell/growth factor-laden matrixes are focused. Besides, the bio-ink compositions, including polymeric/hybrid hydrogels and cell-based bio-inks are classified according to fundamental and recent studies. Herein, different effective parameters, such as viscosity, rheological properties, cross-linking methods, biodegradation biocompatibility, are considered. Finally, different types of cells and growth factors that can encapsulate in the bio-inks to promote bone repair are discussed, and both in vitro and in vivo achievement are considered. This review provides current and future perspectives of cell-laden bioprinting technologies. The restrictions and challenges are identified, and proper strategies for the development of cell-laden matrixes and high-performance printable bio-inks are proposed.     

Interactive smart battery storage for a PV and wind hybrid energy management control based on conservative power theory

This paper presents interactive smart battery-based storage (BBS) for wind generator (WG) and photovoltaic (PV) systems. The BBS is composed of an asymmetric cascaded H-bridge multilevel inverter (ACMI) with staircase modulation. The structure is parallel to the WG and PV systems, allowing the ACMI to have a reduction in power losses compared to the usual solution for storage connected at the DC-link of the converter for WG or PV systems. Moreover, the BBS is embedded with a decision algorithm running real-time energy costs, plus a battery state-of-charge manager and power quality capabilities, making the described system in this paper very interactive, smart and multifunctional. The paper describes how BBS interacts with the WG and PV and how its performance is improved. Experimental results are presented showing the efficacy of this BBS for renewable energy applications.     

Ultraviolet Lamp Output Measurement: A Concise Derivation of the Keitz Equation

An equation relating the measured irradiance and the output power of a fluorescent lamp was derived by Keitz. The equation forms the basis for a new protocol that has been proposed for quantifying the total flux from an ultraviolet lamp. There has been confusion in the literature regarding the spatial distribution of flux from lamp emitters, which has led to emission models that are similar to the Keitz model but are incorrect. The Keitz equation is derived here from first principles in an effort to eliminate the confusion and present a correct method of calculating total flux.     

Differential graphical games for H∞ control of linear heterogeneous multiagent systems

Differential graphical games have been introduced in the literature to solve state synchronization problem for linear homogeneous agents. When the agents are heterogeneous, the previous notion of graphical games cannot be used anymore and a new definition is required. In this paper, we define a novel concept of differential graphical games for linear heterogeneous agents subject to external unmodeled disturbances, which contain the previously introduced graphical game for homogeneous agents as a special case. Using our new formulation, we can solve both the output regulation and H_∞ output regulation problems. Our graphical game framework yields coupled Hamilton‐Jacobi‐Bellman equations, which are, in general, impossible to solve analytically. Therefore, we propose a new actor‐critic algorithm to solve these coupled equations numerically in real time. Moreover, we find an explicit upper bound for the overall ‐gain of the output synchronization error with respect to disturbance. We demonstrate our developments by a simulation example.     

Wireless Information and Power Transfer in Single User OFDM Systems

Wireless Personal Communications - In this article, OFDM-based single-user simultaneous wireless information and power transfer (SWIPT) system for power splitting (PS) and time switching (TS) plans...     

Dehydrogenation kinetics and catalysis of organic heteroaromatics for hydrogen storage

The complete recovery of the H₂ stored on dodecahydro-N-ethylcarbazole was achieved at 443 K and 101 kPa using Pd catalysts prepared by incipient wetness impregnation and calcination in He rather than air. Over a 4 wt% Pd/SiO₂ catalyst, the reaction proceeded to complete conversion within 22 min and complete H₂ recovery (5.8 wt%) within 1.6 h. The dehydrogenation rate of dodecahydro-N-ethylcarbazole and selectivity to the completely dehydrogenated product, N-ethylcarbazole, were dependent upon the Pd particle size. The dehydrogenation rate of dodecahydro-N-ethylcarbazole was compared to that of dodecahydrocarbazole and dodecahydrofluorene. The lower turn-over frequency (TOF) for dodecahydrocarbazole was attributed to a strong adsorption of the dehydrogenated products to Pd through the N atom, whereas the ethyl group in dodecahydro-N-ethylcarbazole prevented a strong N interaction with the surface. Density functional theory (DFT) results showed that dodecahydrocarbazole and dodecahydrofluorene were more strongly adsorbed on Pd than dodecahydro-N-ethylcarbazole leading to a significant decrease in their TOFs for H₂ recovery.     

Effect of various efficient vulcanization cure systems on the compression set of a nitrile rubber filled with different fillers

Effect of various efficient vulcanization (EV) sulfur cure systems on the compression set of a nitrile rubber filled with carbon black and silica/silane fillers was examined. The cure systems had different amounts of thiuram and sulfenamide accelerators and elemental sulfur, whilst the loading of zinc oxide and stearic acid activators was kept constant. The fillers had surface areas from 35 to 175 m²/g. In this study, the lowest compression set was measured for the rubber filled with carbon black with 78 m²/g surface area, which was cured with an EV cure system made of a small amount of elemental sulfur and large amounts of the two accelerators. Interestingly, a small change in the amount of elemental sulfur had a bigger effect on the compression set than did large changes in the loading of the accelerators in the cure system. Among the fillers, carbon black caused less compression set of the rubber vulcanizate than the silica/silane system did. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41512.